Micro-mechanical characterization of micro-architectured tungsten coatings
Source abstract
Abstract
Abstract The current work provides a detailed analysis of the microstructure, mechanical properties, and out-of-plane compression failure modes of tungsten micro-architectured coatings. These coatings are candidates for extremely high temperature applications and for plasma facing components. The current analysis reveals that these coating are multi-layered coatings composed of columnar grains with many pre-existing voids/cracks along grain boundaries. By means of ex situ and in situ microcompression experiments of microcrystals fabricated into these coatings, the mechanical response and possible failure modes have been investigated. These experiments show a size-dependent response in both the flow stress and deformation modes. Smaller microcrystals show a higher strength and large strain burst followed by catastrophic failure dominated by intergranular fracture assisted plastic buckling of the limited number of grains that comprise the microcrystal. Larger microcrystals also show intergranular fracture, however, a continuous hardening response is driven by restricting the lateral movement of the columnar grains by other grains in the crystal. In addition, three-dimensional finite element method simulations were performed to further shed light on the influences of microstructural configurations on the post-yielding behavior, as well as providing a predictive tool of the deformation of these coatings. This work underscores the importance of microstructural design and control of the grain aspect ratio and grain boundary cohesive strength in an effort to extend the life of such micro-architectured coatings.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Metal and Thin Film Mechanics · High-Velocity Impact and Material Behavior · Microstructure and mechanical properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (26)
Show source-provided references
1. J.R. Brophy, C.E. Grrner, J.E. Polk, J.M. Weiss, The ion propulsion system on nasa's space technology 4 champollion comet rendezvous mission, in: Proceedings of the 35th Joint Propulsion Conference, AIAA; 1999. pp. 99–2856.
2. Comet rendezvous mission design using solar electric propulsion spacecraft10.2514/2.3621 ↗
3. J.R. Brohpoy, Ion propulsion system design for the comet nucleus sample return mission, in: Proceedings of the 35th Joint Propulsion Conference, AIAA, 2000, pp. 2000–3414.
4. Recent advances in nuclear powered electric propulsion for space exploration10.1016/j.enconman.2007.10.015 ↗
5. O. Hankins, M. Bourham, O. Auciello, J. Stock, J. Gilligan, B. Wehring, Parametric studies of high-heat-flux-induced erosion of surfaces in an electrothermal accelerator, in: Proceedings of the IEEE Int. Conf. Plasma Sci. 1989, pp. 39–40.10.1109/PLASMA.1989.165969 ↗
6. The ultimate performance of gridded ion thrusters for interstellar missions
7. Overview of erosion mechanisms, impurity transport, and deposition in textor and related modeling10.13182/FST05-A696 ↗
8. Lassner · 1999
9. Erosion/redeposition analysis: status of modeling and code validation for semi-detached tokamak edge plasmas10.1016/S0022-3115(98)00822-8 ↗
10. ULTRAMET. Refractory Metal Coatings and Freestanding Structures, 2017. 〈http://www.ultramet.com/refractory_metal_coatings.html〉.
11. Micro-engineered first wall tungsten armor for high average power laser fusion energy systems10.1016/j.jnucmat.2005.08.012 ↗
12. Development of micro-engineered textured tungsten surfaces for high heat flux applications10.1016/j.jnucmat.2013.05.004 ↗
13. Solar absorbing surfaces of anodized dendritic tungsten10.1147/rd.224.0372 ↗
14. Sputtering of molybdenum and tungsten nano rods and nodules irradiated with 150ev argon ions10.1016/j.apsusc.2014.12.201 ↗
15. The design of accurate micro-compression experiments10.1016/j.scriptamat.2005.06.043 ↗
16. The relation between load and penetration in the axisymmetric boussinesq problem for a punch of arbitrary profile10.1016/0020-7225(65)90019-4 ↗
17. Tensile and compressive behavior of tungsten, molybdenum, tantalum and niobium at the nanoscale10.1016/j.actamat.2009.12.022 ↗
18. The influence of the grain boundary strength on the macroscopic properties of a polycrystalline aggregate10.1016/j.nucengdes.2012.12.007 ↗
19. A grain level model for the study of failure initiation and evolution in polycrystalline brittle materials. Part I: theory and numerical implementation10.1016/S0167-6636(02)00285-5 ↗
20. ABAQUS. No Title. ABAQUS 6.13 User’s Manual, 2012.
21. Camanho · 2002 · 1
22. The thermal properties of high purity and fully dense tungsten produced by chemical vapor deposition10.1016/j.jnucmat.2014.11.095 ↗
23. Characterization of thermomechanical damage on tungsten surfaces during long-duration plasma transients10.1016/j.jnucmat.2014.07.007 ↗
24. Correlation between critical temperature and strength of small-scale bcc pillars10.1103/PhysRevLett.103.105501 ↗
25. Temperature-dependent size effects on the strength of Ta and W micropillars10.1016/j.actamat.2015.10.016 ↗
26. Unravelling the physics of size-dependent dislocation-mediated plasticity10.1038/ncomms6926 ↗