journal article·2016-03

Tailoring the mechanical properties of steel sheets using FeC films and diffusion annealing

Elisa Cantergiani, Amélie Fillon, Ben Lawrence, Xavier Sauvage, Michel Perez, Colin P. Scott, Arnaud Weck

Publisher page

Abstract

Abstract In this work amorphous FeC films were deposited on thin sheets of interstitial free steel using physical vapor deposition. Annealing treatments were then carried out to diffuse C from the coating into the substrate at temperatures lower than those traditionally used in carburizing treatments. The yield stress was shown to significantly increase with annealing temperature from ~120 MPa at 25 °C up to a maximum of 300 MPa at 630 °C without any significant loss of ductility. At 710 °C, a decrease in yield strength was related to the coarsening of carbides inside the IF steel (confirmed by atom probe tomography), and the associated reduction in the matrix solid solution carbon concentration (confirmed by thermoelectric power measurements). The through-thickness carbon diffusion profile was predicted using Fick's law and validated by Knoop hardness measurements. Yield strength predictions were accurate if the crystallization of the FeC film was taken into account as it controls the amount of carbon available to be diffused in the interstitial free steel substrate.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advanced Materials Characterization Techniques · Diamond and Carbon-based Materials Research · Metal and Thin Film Mechanics

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (22)

Show source-provided references
1. F.C. Campbell, Elements of Metallurgy and Engineering Alloys, ASM International – The Materials Information Society.
2. Metallurgy and processing of ultra-low carbon bake hardening steels10.1179/026708302225002452 ↗
3. Simulation of case depth of cementation steels according to Fick's laws
4. “Amorphous Fe1−xCx coatings as carbon reservoirs for diffusion strengthening of steel sheets,”10.1016/j.scriptamat.2011.07.023 ↗
5. On the direct nucleation and growth of ferrite and cementite without austenite10.1016/j.scriptamat.2014.09.025 ↗
6. Sustainable development challenges for coated steel sheets10.1051/metal:2005119 ↗
7. W.S. Rasband, ImageJ, 〈http://imagej.nih.gov/ij/〉, 1997–2014.
8. Thermoelectric power applied to metallurgy: principles and recent applications10.3139/146.110198 ↗
9. Application of thermoelectric power measurements to the study of cold rolled austenitic stainless steels10.1007/s10853-009-3684-4 ↗
10. Quantitative evaluation of the interstitial content (C and/or N) in solid solution in extra-mild steels by thermoelectric power measurements10.1016/j.scriptamat.2003.09.007 ↗
11. In situ TEM studies of metal-carbon reactions10.1017/S1431927602020226 ↗
12. Thermal stability and crystallization studies of amorphous TM-C films10.1016/S0040-6090(03)01108-8 ↗
13. Crystallisation of amorphous Fe1−xCx alloys (0.30..x..0.32) and chemical twinning10.1088/0305-4608/16/4/004 ↗
14. J. Gil Sevillano, Thin sheets story: plastic anisotropy, formability and strain localization, TECNUN, Materials Engineering.
15. David S. Wilkinson, Mass transport in solids and fluids, Cambridge University Press.
16. The C–Fe (carbon–iron) system10.1007/BF02665767 ↗
17. V. Rebischung, C. Scott, Durcissement des Toles Minces par Revetements Carburisantes, USINOR Reserche et Developpement (CMC-IRSID).
18. Carbon Diffusivity in BCC iron10.1016/0022-3697(93)90236-K ↗
19. M.J. Roberts, W.S. Owen, Solid solution hardening by carbon and nitrogen in ferrous martensites, The Iron and Steel Institute, Vols. Physical Properties of Martensite and Bainite-Special Report 93, pp. 1965, 171–178
20. Precipitation behavior in ultra-low-carbon steels containing titanium and niobium10.1007/s11661-997-0108-4 ↗
21. Comparison of precipitate behaviors in ultra-low carbon titanium stabilized Interstitial free steel sheets under different annealing processes10.1361/105994999770346396 ↗
22. Precipitation evolution during the annealing of an interstitial-free steel10.1016/S0921-5093(99)00737-6 ↗