The microstructure of the fatigue crack tip in Fe–Al–Mn–0.4% C alloy near the stress intensity threshold
Source abstract
Abstract
Abstract This work is an investigation of the dislocation structures close to the crack tip near the stress intensity threshold, and the dislocation morphology of surface crack initiation. In these experiments, a material (Fe–Al–Mn–0.4% C alloy) with the planar dislocation structure at early stages in fatigue and wavy type at the later step in fatigue was used. The crack propagation was produced by the Instron hydraulic testing machine to obtain the near threshold of the crack propagation. The microstructure was observed by the JEOL 200CX transmission electron microscope. The results are (1) the dislocation structure in front of the crack tip at the stress intensity threshold is the cell with an average diameter about 0.5 μm and with a range of about 2–3 μm. Out of this range, the dislocation is similar to the dislocation of a planar type. (2) The surface crack initiates when the multiple slip system is created and the accomplishment of dislocation is triggering multiple ladder-like wall in persistent slipband (wavy dislocation) embedded in a matrix–planar dislocation (persistent slip Luder band).
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Microstructure and mechanical properties · Microstructure and Mechanical Properties of Steels · Aluminum Alloy Microstructure Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (35)
Show source-provided references
1. Winter · Acta Metall. · 1981 · 29 · 73510.1016/0001-6160(81)90117-6 ↗
2. Basinski · Philos. Mag. · 1969 · 19 · 89910.1080/14786436908225856 ↗
3. A.T. Winter, Philos. Mag. (1978) 457.10.1080/01418617808239182 ↗
4. Buchinger · Philos. Mag. · 1984 · 63 · 189
5. Laird · Mater. Sci. Eng. · 1981 · 81 · 43310.1016/0025-5416(86)90281-8 ↗
6. Chen · Mater. Sci. Lett. · 1989 · 24 · 409
7. Zhai · Acta Metall. · 1996 · 44 · 1729
8. Li · Philos. Mag. · 1998 · 77 · 108110.1080/01418619808221230 ↗
9. Kaneshiro · Acta Metall. · 1989 · 37 · 264510.1016/0001-6160(89)90297-6 ↗
10. Yan · Mater. Sci. · 1986 · 80 · 129
11. C. Laird, S. Stanzl, De La Veaux, L. Bauchinger, Mater. Sci. 80 (1986) 143.
12. Bauchinger · Mater. Sci. · 1986 · 80 · 155
13. Inui · Acta Metall. · 1990 · 38 · 226110.1016/0956-7151(90)90093-V ↗
14. Nahm · Acta Metall. · 1977 · 25 · 10710.1016/0001-6160(77)90114-6 ↗
15. Li · Mater. Sci. Eng. · 1994 · A186 · 6510.1016/0921-5093(94)90306-9 ↗
16. Li · Mater. Sci. Eng. · 1994 · A186 · 8710.1016/0921-5093(94)90307-7 ↗
17. Jin · Acta Metall. · 1990 · 38 · 214110.1016/0956-7151(90)90081-Q ↗
18. Grosskreutz · Acta Metall. · 1972 · 20 · 52310.1016/0001-6160(72)90008-9 ↗
19. Purcell · Metall. Trans. · 1974 · 5 · 180510.1007/BF02644144 ↗
20. Awatani · Metall. Trans. · 1979 · 10A · 50310.1007/BF02697078 ↗
21. K. Katagiri, J. Awatani, K. Koyanagi, Y. Onishi, Tsuji, Metall. Trans. 11A (1980).10.1007/BF02655122 ↗
22. Awatani · Metall. Trans. · 1976 · 7A · 80710.1007/BF02644077 ↗
23. Awatani · Metall. Trans. · 1976 · 7A · 1559
24. Zheng · Mater. Sci. Eng. · 1994 · A176 · 39310.1016/0921-5093(94)91004-9 ↗
25. Kim · Acta Metall. · 1978 · 26 · 77710.1016/0001-6160(78)90028-7 ↗
26. Kim · Acta Metall. · 1978 · 26 · 78910.1016/0001-6160(78)90029-9 ↗
27. Essmann · Philos. Mag. · 1977 · 8A · 1796
28. Li · Acta Metall. · 1989 · 37 · 264510.1016/0001-6160(89)90131-4 ↗
29. Liu · Acta Metall. · 1992 · 40 · 176310.1016/0956-7151(92)90119-Y ↗
30. H.L. Huang, Ph.D thesis, Institute of Material Science, National Sun Yet-sen University, (1997).
31. Liaw · Acta Metall. · 1982 · 30 · 207110.1016/0001-6160(82)90126-2 ↗
32. Marchand · Metall. Trans. · 1982 · 19A · 2575
33. Bake · Acta Metall. · 1987 · 35 · 153310.1016/0001-6160(87)90098-8 ↗
34. Yao · Acta Metall. · 1992 · 40 · 213110.1016/0956-7151(92)90130-7 ↗
35. Fang · Philos. Mag. · 1993 · 67 · 111710.1080/01418619308224761 ↗