journal article·2004-03

Assessment of melting behavior of Cu-coated Ti powders using thermal analysis

M Brochu, S.F Corbin, M.D Pugh, R.A.L Drew

Materials Science and Engineering: A· Volume 369· Issue 1-2
Publisher page

Abstract

Abstract The sequence of intermetallic formation and growth, and melting behavior of a Cu-coated Ti powder, used as active brazing alloy (ABA) for joining ceramic was studied. The experiments show that melting starts at around 885 °C, regardless of the heating rate. Prior to the onset of melting, a series of intermetallic layers was observed (Cu/TiCu 4 /Ti 3 Cu 4 /Ti 2 Cu 3 /Ti) with their relative thickness depending on the heating rate. A heating rate of 10 °C/min gives a final melting temperature of 900 °C as opposed to 915 °C for a sample heated at 40 °C/min. The utilization of N 2 as a “protective” gas has shown the instantaneous formation of TiN from the reaction between Ti and N 2 when the first liquid appears, indicating N diffusion through the copper shell. The remainder of the powder still contains Ti in copper as a TiN diffusion barrier was formed. Mixtures of ABA and Si 3 N 4 powder have demonstrated that the surface of the powder becomes liquid at 894 °C as an intense exothermic peak from the reaction between Ti and Si 3 N 4 is observed.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Aluminum Alloys Composites Properties · Advanced ceramic materials synthesis · Intermetallics and Advanced Alloy Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (12)

Show source-provided references
1. M.G. Nicholas, Joining Processes Introduction to Brazing and Diffusion Bonding, Kluwer Academic Publishers, 1998.
2. G.S. Upadhyaya, Powder Metallurgy Technology, Cambridge International Science Publishing, 1997.
3. D.R. Gaskell, Introduction to the Thermodynamics of Materials, third ed., Taylor & Francis, Washington, 1995.
4. O. Kubaschewski, C.B. Alcock, Metallurgical Thermochemistry, fifth ed., Pergamon Press, Oxford, 1979.
5. M.G. Nicholas, Active Metal Brazing, Joining of Ceramics, Institute of Ceramics, Chapman and Hall, 1990.
6. ASM Handbook: Phase Diagrams, vol. 3 (2), ASM International, 1994, p. 180.
7. Brochu · Ceram. Eng. Sci. Proc. · 2002 · 23 · 80110.1002/9780470294741.ch94 ↗
8. Corbin · Met. Mater. Trans. A · 2001 · 32A · 97110.1007/s11661-001-0354-9 ↗
9. Corbin · Met. Mater. Trans. A · 2002 · 33A · 11710.1007/s11661-002-0010-z ↗
10. S.D. Peteves, G. Ceccone, M. Paulasto, V. Stamos, P. Yvon, JOM, January (1996) 48, 74.10.1007/BF03221363 ↗
11. Adams · Mater. Chem. Phys. · 1996 · 43 · 14510.1016/0254-0584(95)01610-7 ↗
12. Adams · Thin Solid Films · 1995 · 270 · 34610.1016/0040-6090(95)06712-4 ↗