Quantitative analysis of grain boundary sliding by atomic force microscopy for early detection of intergranular damage
Source abstract
Abstract
Abstract Atomic force microscopy (AFM) was used to analyze grain boundary sliding. This method was applied to measure the out-of-plane component of grain boundary sliding on two 304H grades and one X-750 grade. The main objective was to examine the initial stage of grain boundary sliding, after short-time constant load tests. The results showed that grain boundary sliding is activated at initial loading, producing a few tens nm high steps. The influences of grain boundary trace orientation, the applied load and the crystallographic misorientation were analyzed. The latter is the most distinctive parameter on grain boundary sliding propensity. An ‘initial stage’ of grain boundary sliding was identified. The proposed method allows early detection of intergranular damage sensitivity of industrial grades after short-time tests, and can be used to refine further long-time tests on heavier experimental devices, such as creep tests or stress corrosion cracking tests.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Microstructure and mechanical properties · High Temperature Alloys and Creep · Hydrogen embrittlement and corrosion behaviors in metals
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (23)
Show source-provided references
1. West · J. Nucl. Mater. · 2011 · 408 · 14210.1016/j.jnucmat.2010.11.012 ↗
2. Mathew · Mater. Sci. Eng., A · 2012 · 535 · 7610.1016/j.msea.2011.12.044 ↗
3. Chao · Acta Mater. · 2012 · 60 · 78110.1016/j.actamat.2011.10.040 ↗
4. J. Mithieux, Influence de la teneur en chrome et de la structure des alliages de nickel sur leur comportement en corrosion sous contrainte en milieu primaire des réacteurs à eau pressurisée, Ph.D. Thesis, INPG, 1997.
5. Alexandreanu · Scr. Mater. · 2006 · 54 · 104710.1016/j.scriptamat.2005.11.051 ↗
6. Kjell · J. Nucl. Mater. · 2010 · 405 · 13110.1016/j.jnucmat.2010.07.044 ↗
7. Hu · Mater. Charact. · 2010 · 61 · 104310.1016/j.matchar.2010.06.017 ↗
8. Clarisse · Ceram. Int. · 2000 · 26 · 29510.1016/S0272-8842(99)00056-5 ↗
9. Langdon · Metall. Trans. · 1972 · 3 · 79710.1007/BF02647651 ↗
10. Brandon · Acta Metall. · 1966 · 14 · 147910.1016/0001-6160(66)90168-4 ↗
11. Palumbo · Acta Metall. Mater. · 1990 · 38–11 · 234310.1016/0956-7151(90)90101-L ↗
12. Palumbo · Scr. Mater. · 1998 · 38 · 168510.1016/S1359-6462(98)00077-3 ↗
13. Raj · Mater. Sci. Eng. · 1987 · 96 · 5710.1016/0025-5416(87)90540-4 ↗
14. Keller · Mater. Sci. Eng., A · 2009 · 500 · 20710.1016/j.msea.2008.09.054 ↗
15. Miyazaki · Acta Metall. · 1979 · 27 · 85510.1016/0001-6160(79)90120-2 ↗
16. J.-F. Kergaravat, Influence de la microstructure sur la sensibilité à la corrosion sous contrainte des alliages 600 et 690 en milieu primaire des réacteurs à eau sous pression, Ph.D. Thesis, INPG, 1996.
17. Gifkins · J. Mater. Sci. · 1968 · 3 · 30610.1007/BF00741967 ↗
18. Aigeltinger · J. Mater. Sci. · 1975 · 10 · 188910.1007/BF00754479 ↗
19. J.-P. Couzinie, L. Priester, Grain Boundaries and Crystalline Plasticity, ISTE-Wiley, pp. 47–107.
20. Langdon · J. Mater. Sci. · 2006 · 41 · 59710.1007/s10853-006-6476-0 ↗
21. Watanabe · Res Mech. · 1984 · 11 · 47
22. Pan · Acta Mater. · 1996 · 44 · 468510.1016/S1359-6454(96)00125-5 ↗
23. Alexandreanu · Mater. Sci. Eng., A · 2001 · 300 · 9410.1016/S0921-5093(00)01705-6 ↗