Laser based etching technique for metallography and ceramography
Source abstract
Abstract
The details of a new etching procedure developed using a pulsed Nd:YAG laser for revealing microstructures in metallic and ceramic specimens are presented. The new etching technique would be useful for applications on existing components, thin specimens and specimens under hostile environments, in a remote and non-contact manner. The technique has been applied on a variety of materials such as UO 2 , boron carbide, copper and Zircaloy-2, to demonstrate its wider applications. It has been found that the microstructures obtained using this new laser based etching (LBE) technique, many a time, have even better contrast, as compared to the chemically etched specimens. For example, in UO 2 specimens, the porosity at the grain boundaries and within the grains have been clearly revealed by LBE. The microstructure of copper, obtained using the LBE, clearly reveals the grain boundaries, twins and sub grain features. Unlike conventional etching techniques, LBE requires only polishing up to 600 grit level, unlike the optical finish that is essential for chemical and electrochemical etching. In fact, the efficiency with LBE is found to be better when the surface has lesser than optical finish, because of the associated advantage of lower reflectivity of the surface for the incident laser beam.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Laser Material Processing Techniques · Nuclear Materials and Properties · Welding Techniques and Residual Stresses
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (6)
Show source-provided references
1. Gahm · Practical Metallography · 1982 · 19 · 369
2. Willmann · Practical Metallography · 1978 · 15 · 1110.1515/pm-1978-150103 ↗
3. Pohl · Practical Metallography · 1980 · 11 · 42
4. Sanwald · Metallography · 1974 · 7 · 7310.1016/0026-0800(74)90032-9 ↗
5. Ready · 1971
6. J. Philip, T. Jayakumar, Baldev Raj, A new process for producing articles of metals, alloys and ceramics with etched surfaces, Patent (427/Bom/98).