journal article·2003-02

Influence of atomization gas on coating properties under Ti arc spraying

Nobuaki Sakoda, Moritaka Hida, Yoshito Takemoto, Akira Sakakibara, Toshiro Tajiri

Materials Science and Engineering: A· Volume 342· Issue 1-2
Publisher page

Abstract

Abstract An atomization gas used in arc spraying has a great influence on the nitriding process of titanium. Hence, we investigated the chemical composition of titanium coatings reflecting the nitriding process with the use of air, N 2 and Ar as the atomization gas. The ratios of contents (at.%) for nitrogen and oxygen in the coatings were 3:1 (air), 6:1 (N 2 ) and 2:1 (Ar), and the oxygen contents were almost the same. The peak height ratios of TiN 0.3 to TiN in XRD rose with decrease of the nitrogen content. The TiN peaks of all of the coatings were slightly shifted to higher angles by the oxygen, and their intensity was influenced only by the nitrogen content. In addition, β-Ti and Fe 2 Ti were detected in XRD from the surface of thin coatings, and an alloyed layer in the interface region between coating and substrate was observed in SEM. The Ar atomized coating had the thickest alloyed layer. N 2 atomization is efficient in the TiN formation. Ar atomization restrains the reaction of titanium with the nitrogen and oxygen, and promotes the chemical bonding between the coating and substrate.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Metal and Thin Film Mechanics · Plasma Diagnostics and Applications · Semiconductor materials and devices

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (15)

Show source-provided references
1. Valente · Surf. Coat. Technol. · 2000 · 127 · 8610.1016/S0257-8972(00)00549-1 ↗
2. Bacci · Mater. Sci. Eng. · 2000 · A283 · 18910.1016/S0921-5093(00)00704-8 ↗
3. Lugscheider · 1996 · 927
4. Smith · 1993 · 439
5. Smith · J. Thermal Spray Technol. · 1992 · 1 · 5710.1007/BF02657018 ↗
6. Holcomb · 1997 · 141
7. Nakayama · Appl. Microbiol. Biotechnol. · 1998 · 50 · 50210.1007/s002530051327 ↗
8. K. Kurosawa, M. Nakano, E. Nomura, Y. Ando, S. Tobe, Proceedings of the Japan Society of Mechanical Engineers Kanto, Utsunomiya, Japan, September 24–25, 1999, p. 117.
9. Adachi · J. Jpn. Thermal Spray. Soc. · 2000 · 37 · 123
10. S. Adachi, N. Fujita, Y. Hanatate, T. Mizukoshi, M. Takemura, Proceedings of the 71st Japan Thermal Spraying Society, Osaka, Japan, June 26–27, 1999, p. 39.
11. JCPDS-card, 38-1420.
12. JCPDS-card, 8-117.
13. Yamaguma · News Nat. Inst. Ind. Safety · 1998 · 22 · 3
14. Nagasaki · 1993 · 96
15. Katayama · 1983 · 12