Thermally stable Al–Fe–Mn-based alloy prepared by centrifugal spraying and hot die forging
Source abstract
Abstract
Abstract An Al–8Fe–5Mn (wt%) alloy was prepared by a unique method combining centrifugal spraying with hot die forging. The rapidly solidified semi-product was prepared by pouring the melt onto a rapidly rotating graphite disc. The semi-product was then compacted by die forging at a temperature of 550 °C. The structure, mechanical properties and thermal stability of the alloy were investigated. The investigated alloy was compared to a commercial casting Al–12Si–1Cu–1Mg–1Ni alloy (EN AC-48000), which is used in high temperature automotive applications. The preparation method produced a compact pore-free material. A very fine intermetallic phase Al 6 (Mn,Fe) was detected in the structure, which was found to primarily impact the thermal stability of the material. Thermal stability tests (400 °C, 100 h) showed that the hardness of the investigated alloy dropped from approximately 90 to 80 HV (11%) and the yield strength from 210 to 195 MPa (7%). The hardness of the commercial alloy dropped from 110 to 55 HV (50%) and the yield strength from 330 to 150 MPa (55%). At high temperatures, the yield strengths of the Al–8Fe–5Mn alloy and the commercial casting alloy were comparable – the yield strength at 400 °C was 75 MPa for the former and 78 MPa for the latter. The combination of centrifugal spraying and die forging was also found to be a suitable processing route for aluminium alloys with high iron content.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Aluminum Alloys Composites Properties · Aluminum Alloy Microstructure Properties · Microstructure and mechanical properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (21)
Show source-provided references
1. Laha · Acta Mater. · 2005 · 53 · 542910.1016/j.actamat.2005.08.027 ↗
2. Nagaishi · Mater. Sci. Eng. A · 2007 · 449–451 · 79410.1016/j.msea.2006.02.383 ↗
3. Du · Mater. Sci. Eng. A · 2003 · 363 · 14010.1016/S0921-5093(03)00624-5 ↗
4. Singh · J. Non-Cryst. Solids · 1993 · 153–154 · 8610.1016/0022-3093(93)90320-W ↗
5. K. Stan, L. Lityńska-Dobrzyńska, J.L. Lábár, A. Góral, J. Alloys Compd, 10.1016/j.jallcom.2012.12.013, in press.10.1016/j.jallcom.2012.12.013 ↗
6. Schurack · Acta Mater. · 2001 · 49 · 135110.1016/S1359-6454(01)00045-3 ↗
7. Nayak · Mater. Sci. Eng. A · 2010 · 527 · 237010.1016/j.msea.2009.12.044 ↗
8. Huang · Mater. Sci. Eng. A · 2009 · 502 · 11810.1016/j.msea.2008.10.005 ↗
9. Engler · Mater. Charact. · 2013 · 79 · 6010.1016/j.matchar.2013.02.012 ↗
10. Shek · Mater. Sci. Eng. A · 2003 · 357 · 2010.1016/S0921-5093(02)00869-9 ↗
11. Singh · Acta Metall. Mater. · 1995 · 43 · 353910.1016/0956-7151(95)00024-P ↗
12. Tomut · Mater. Sci. Eng. A · 2004 · 375–377 · 123910.1016/j.msea.2003.10.265 ↗
13. Rajabi · Mater. Charact. · 2009 · 60 · 137010.1016/j.matchar.2009.06.014 ↗
14. Vojtěch · J. Alloys Compd. · 2010 · 506 · 58110.1016/j.jallcom.2010.07.081 ↗
15. Průša · Mater. Sci. Eng. A · 2013 · 565 · 1310.1016/j.msea.2012.11.119 ↗
16. Michna · 2007
17. Mondolfo · 1976
18. Clementi · J. Chem. Phys. · 1967 · 47 · 130010.1063/1.1712084 ↗
19. J.R. Davis & Associates, A.I.H. Committee, Aluminium and aluminium alloys, ASM International, The Materials Information Society, Ohio, 1993.
20. Vojtěch · Mater. Sci. Eng. A · 2007 · 458 · 37110.1016/j.msea.2006.12.136 ↗
21. Shaw · Scr. Mater. · 2004 · 51 · 44910.1016/j.scriptamat.2003.12.033 ↗