journal article·2019-07Open access

Experimental in-situ verification of the unloading mechanics of dual phase steels

A. Kupke, L. Madej, P.D. Hodgson, M. Weiss

Abstract

Abstract The paper presents the first experimental verification of dislocation repulsion during springback of Dual Phase (DP) steel, a mechanism which is suggested to cause non-linear unloading due to micro-plastic strain generation. In-situ loading-unloading tests are conducted within a Scanning Electron Microscope (SEM). It is shown that strain partitioning between ferrite grains as well as within a single ferrite grain occurs. It was observed that dislocations pile up during loading and repel or bow out during unloading. Only dislocations that were mobile during the initial deformation were able to move during unloading.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Metal Forming Simulation Techniques · Microstructure and Mechanical Properties of Steels · Metallurgy and Material Forming

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (50)

Show source-provided references
1. Bauschinger effect and residual phase stresses in two ductile-phase steels: Part I. The influence of phase stresses on the Bauschinger effect10.1007/BF02671942 ↗
2. Levy · 2006
3. Analysis of the decrease of the apparent young's modulus of advanced high strength steels and its effect in bending simulations
4. Elastic–plastic behavior of steel sheets under in-plane cyclic tension–compression at large strain10.1016/S0749-6419(01)00049-3 ↗
5. Nonlinear elastic behaviors of low and high strength steels in unloading and reloading10.1016/j.msea.2012.11.020 ↗
6. Experimental and numerical investigation of springback effect for advanced high strength dual phase steel10.1016/j.matdes.2012.02.055 ↗
7. A study of the unloading behaviour of dual phase steel10.1016/j.msea.2014.02.069 ↗
8. Springback prediction in sheet metal forming of high strength steels10.1016/j.matdes.2013.02.060 ↗
9. Complex unloading behavior: nature of the deformation and its consistent constitutive representation10.1016/j.ijplas.2010.12.003 ↗
10. Bauschinger effect and residual phase stresses in two ductile-phase steels: Part II. The effect of microstructure and mechanical properties of the constituent phases on Bauschinger effect and residual phase stresses10.1007/BF02671943 ↗
11. Stress and strain partitioning of ferrite and martensite during deformation10.1007/s11661-009-9824-2 ↗
12. Strain partitioning in dual-phase steels containing tempered martensite10.1016/j.msea.2014.05.078 ↗
13. On the necessity of taking into account the variation in the Young modulus with plastic strain in elastic-plastic software10.1016/0029-5493(95)01123-4 ↗
14. The elastic-plastic transition of metals10.1016/j.ijplas.2016.04.009 ↗
15. Change of Young's modulus of cold-deformed pure iron in a tensile test10.1007/s11661-005-0006-6 ↗
16. Study of the inelastic response of TRIP steels after plastic deformation10.2355/isijinternational.45.1925 ↗
17. Vuoristo · 2004 · 162
18. Evaluation of change in material properties due to plastic deformation10.1016/j.jmatprotec.2004.04.114 ↗
19. Elastic and inelastic recovery after plastic deformation of DQSK steel sheet10.1115/1.1491574 ↗
20. Inelastic effects on springback in metals10.1016/S0749-6419(01)00054-7 ↗
21. A physically-based constitutive model for metal deformation10.1016/0001-6160(80)90046-2 ↗
22. Theory of mechanical damping due to dislocations10.1063/1.1722436 ↗
23. On the nonlinear anelastic behavior of AHSS10.1016/j.ijsolstr.2017.03.009 ↗
24. Dislocation substructure as a function of strain in a dual-phase steel10.1007/BF02644716 ↗
25. CXVII. A theory of work-hardening of metal crystals, London, Edinburgh, and Dublin10.1080/14786441108521024 ↗
26. XLVI. Anomaly in the rigidity modulus of copper alloys for small concentrations, London, Edinburgh, and Dublin10.1080/14786440408520327 ↗
27. Study of the inelastic response of TRIP steels after plastic deformation10.2355/isijinternational.45.1925 ↗
28. A model of large-strain cyclic plasticity describing the Bauschinger effect and workhardening stagnation10.1016/S0749-6419(01)00050-X ↗
29. Extension of quasi-plastic–elastic approach to incorporate complex plastic flow behavior – application to springback of advanced high-strength steels10.1016/j.ijplas.2013.01.011 ↗
30. Effect of nonlinear multi-axial elasticity and anisotropic plasticity on quasi-static dent properties of automotive steel sheets10.1016/j.ijsolstr.2016.01.020 ↗
31. In situ TEM observations of reverse dislocation motion upon unloading in tensile-deformed UFG aluminium10.1016/j.actamat.2012.02.049 ↗
32. Scanning electron microscopy imaging of dislocations in bulk materials, using electron channeling contrast10.1002/jemt.20293 ↗
33. Theory and application of electron channelling contrast imaging under controlled diffraction conditions10.1016/j.actamat.2014.04.018 ↗
34. Characterizing dislocation structures in bulk fatigued copper single crystals using electron channelling contrast imaging (ECCI)10.1080/095008397178986 ↗
35. Electron channeling contrast imaging of twins and dislocations in twinning-induced plasticity steels under controlled diffraction conditions in a scanning electron microscope10.1016/j.scriptamat.2009.06.018 ↗
36. Dislocation and twin substructure evolution during strain hardening of an Fe–22 wt.% Mn–0.6 wt.% C TWIP steel observed by electron channeling contrast imaging10.1016/j.actamat.2011.07.009 ↗
37. Mikrostrukturelle Charakterisierung von hochfesten Cu-Ni-Si-Legierungen mittels Electron-Channeling-Rückstreukontrast im Rasterelektronenmikroskop
38. Demonstration of the g · b x u = 0 edge dislocation invisibility criterion for electron channelling contrast imaging10.1080/09500830110088755 ↗
39. The Effect of microstructure and pre-strain on the change in apparent Young's modulus of a Dual-Phase steel10.1007/s11665-017-2754-z ↗
40. Effects of morphology on the mechanical behavior of a dual phase Fe/2Si/0.1 C steel10.1007/BF02648546 ↗
41. Effect of the martensite distribution on the strain hardening and ductile fracture behaviors in dual-phase steel10.1016/j.msea.2014.02.058 ↗
42. Exploring spatial resolution in Electron Back-Scattered Diffraction experiments via Monte Carlo simulation10.1017/S1431927698980011 ↗
43. A new aspect of the theory of flow stress of metals10.1016/0036-9748(70)90078-5 ↗
44. ECCI based characterization of dislocation shear in polycrystalline arrays during heterogeneous deformation of commercially pure titanium10.1016/j.matchar.2018.06.003 ↗
45. Hull · 1984
46. Precision measurements of the lattice constants of twelve common metals10.1103/PhysRev.25.753 ↗
47. De Cooman · 2011
48. Effects of microstructure on the variation of the unloading behavior of DP780 steels10.1007/s11665-015-1671-2 ↗
49. Observations on the nonlinear unloading behavior of advanced high strength steels10.1007/s11661-014-2688-0 ↗
50. Strain localization and damage in dual phase steels investigated by coupled in-situ deformation experiments and crystal plasticity simulations10.1016/j.ijplas.2014.06.004 ↗