Correlation between poly-modal grain size and peculiar mechanical properties of pure aluminum deformed by RCSR process
Source abstract
Abstract
Abstract Nowadays, industrial demands on materials with high strength and superior physical properties have made ultra-fine grain metallic materials one of the hot topics for materials science studies. In the present study, the newly developed technique based on severe plastic deformation so-called Repetitive Corrugation and Straightening by Rolling (RCSR) was applied to study its effect on the microstructure and mechanical behavior of commercially pure aluminum. The microstructure and correlated mechanical behavior of specimens after RCSR was systematically studied. A polymodal microstructure as revealed by the microstructural studies, and high elongation with relative good strength after RCSR indicate promising results. Our studies show that the heterogeneous mode of deformation in RCSR could be responsible for the poly-modal microstructure that along with the proper evolution of texture components gives the material both high ductility and reasonable strength. In fact, the combination of RCSR performance and the physicomechanical properties of aluminum provide the opportunity to get outstanding tensile properties without any subsequent annealing process.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Microstructure and mechanical properties · Aluminum Alloys Composites Properties · Aluminum Alloy Microstructure Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (46)
Show source-provided references
1. Bulk nanostructured materials from severe plastic deformation10.1016/S0079-6425(99)00007-9 ↗
2. A. Rosochowski, Processing metals by severe plastic deformation, vol. 101–102, 2005.10.4028/3-908451-02-7.13 ↗
3. Microstructure control using severe plastic deformation10.1016/j.stam.2006.05.011 ↗
4. Principles of equal-channel angular pressing as a processing tool for grain refinement10.1016/j.pmatsci.2006.02.003 ↗
5. On the flow and mechanical behavior of Al matrix composite reinforced by nickel based (90% Ni–10% Cr) wires during equal channel angular pressing10.1016/j.msea.2013.05.031 ↗
6. Role of severe plastic deformation on the formation of nanograins and nano-sized precipitates in Fe–Ni–Mn steel10.1016/j.matdes.2011.02.018 ↗
7. Microstructural study of an age hardenable martensitic steel deformed by equal channel angular pressing10.1016/j.msea.2008.02.034 ↗
8. Control of austenite to martensite transformation through equal channel angular pressing aided by thermodynamic calculations10.1016/j.actamat.2010.01.044 ↗
9. Using high-pressure torsion for metal processing: fundamentals and applications10.1016/j.pmatsci.2008.03.002 ↗
10. Microstructure development and hardening during high pressure torsion of commercially pure aluminium: strain reversal experiments and a dislocation based model10.1016/j.msea.2010.11.079 ↗
11. N. Tsuji, N. Kamikawa, H. W. Kim, and Y. Minamino, Fabrication of bulk nanostructured materials by ARB (accumulative roll bonding) process, presented at the Ultrafine Grained Materials III, 2004, pp. 219–226.
12. Role of shear strain in ultragrain refinement by accumulative roll-bonding (ARB) process10.1016/S1359-6462(01)01239-8 ↗
13. Severe plastic deformation and strain localization in groove pressing10.1016/j.commatsci.2008.01.007 ↗
14. Constrained groove pressing and its application to grain refinement of aluminum10.1016/S0921-5093(01)01665-3 ↗
15. Numerical and experimental investigations of constrained groove pressing and rolling for grain refinement10.1016/S0924-0136(02)00722-7 ↗
16. Three strategies to achieve uniform tensile deformation in a nanostructured metal10.1016/j.actamat.2003.12.022 ↗
17. Strength and ductility of ultrafine grained aluminum and iron produced by ARB and annealing10.1016/S1359-6462(02)00282-8 ↗
18. High tensile ductility in a nanostructured metal10.1038/nature01133 ↗
19. Instabilities and ductility of nanocrystalline and ultrafine-grained metals10.1016/S1359-6462(03)00396-8 ↗
20. Optimization of strength and ductility in nanocrystalline and ultrafine grained metals10.1016/S1359-6462(03)00394-4 ↗
21. Revealing extraordinary intrinsic tensile plasticity in gradient nano-grained copper10.1126/science.1200177 ↗
22. Heterogeneous lamella structure unites ultrafine-grain strength with coarse-grain ductility10.1073/pnas.1517193112 ↗
23. Evading the strength-ductility trade-off dilemma in steel through gradient hierarchical nanotwins10.1038/ncomms4580 ↗
24. High-strength and high-ductility nanostructured and amorphous metallic materials10.1002/adma.201401595 ↗
25. Making strong nanomaterials ductile with gradients10.1126/science.1255940 ↗
26. Atomistic tensile deformation mechanisms of Fe with gradient nano-grained structure10.1063/1.4928448 ↗
27. Synergetic strengthening by gradient structure10.1080/21663831.2014.935821 ↗
28. Revealing deformation microstructures10.1016/S1369-7021(07)70206-7 ↗
29. Impact of the grain size distribution on the yield stress of heterogeneous materials10.1016/j.ijplas.2006.03.004 ↗
30. Ductilization of nanocrystalline materials for structural applications10.1016/j.scriptamat.2004.05.015 ↗
31. Fatigue and microstructure of ultrafine-grained metals produced by severe plastic deformation10.1016/j.scriptamat.2004.05.012 ↗
32. Thermal behavior of Ni (99.967% and 99.5% purity) deformed to an ultra-high strain by high pressure torsion10.1016/j.actamat.2009.11.012 ↗
33. In-situ annealing of severe plastic-deformed OFHC copper10.1007/s11661-007-9409-x ↗
34. Formation of bimodal grain structures in high purity Al by reversal high pressure torsion10.1016/j.scriptamat.2010.11.020 ↗
35. Microstructure and mechanical behavior of martensitic steel severely deformed by the novel technique of repetitive corrugation and straightening by rolling10.1016/j.msea.2012.04.073 ↗
36. On the deformation analysis during RCSR process aided by finite element modeling and digital image correlation10.1002/adem.201600100 ↗
37. Microstructure and texture through thickness of ultralow carbon IF steel sheet severely deformed by accumulative roll-bonding10.1016/j.stam.2003.10.018 ↗
38. Current issues in recrystallization: a review10.1016/S0921-5093(97)00424-3 ↗
39. Microstructure evolution and nanograin formation during shear localization in cold-rolled titanium10.1016/j.actamat.2010.05.007 ↗
40. Shear localization in dynamic deformation: microstructural evolution10.1007/s11661-007-9431-z ↗
41. A. Rosochowski, L. Olejnik, M. Richert, 3D-ECAP of square aluminium billets, in Advanced Methods in Material Forming: With 264 Figures and 37 Tables, 2007, pp. 215–232.10.1007/3-540-69845-0_13 ↗
42. Microstructure and mechanical properties of ultra-fine grains (UFGs) aluminum strips produced by ARB process10.1016/j.jallcom.2008.06.161 ↗
43. The influence of cooling rate on the microstructures and mechanical properties in ultrafine-grained aluminum processed by hot rolling10.1016/j.msea.2010.04.087 ↗
44. Aluminium matrix hybrid composites: a review of reinforcement philosophies; mechanical, corrosion and tribological characteristics10.1016/j.jmrt.2015.05.003 ↗
45. Metal matrix composites – From science to technological significance10.1016/j.compscitech.2005.05.027 ↗
46. Hosford · 1993 · 1993 · 248