Cyclic tensile response of Mo-27 at% Re and Mo-0.3 at% Si solid solution alloys
Source abstract
Abstract
Abstract Stress-controlled uniaxial cyclic tensile tests were conducted on binary Mo-27 at% Re and Mo-0.3 at% Si solid solutions as a function of temperature and compared against the previously reported cyclic response of pure Mo. The Mo-27 at% Re alloy with a recrystallized grain size of ~30 µm was evaluated in the temperature range 25 °C–800 °C at R=0.1 and stress range that was 80% of the ultimate tensile strength (UTS); a peak in fatigue life was observed between 300 °C and 500 °C. The decrease in fatigue life at the higher temperatures of 700 °C and 800 °C is attributed to dynamic strain aging. Transmission electron microscopy of the cyclically-deformed alloy revealed parallel bands of dislocation at room temperature that transitioned to a uniform cell structure at 500 °C and back to orthogonal planar arrays at 800 °C. The as-extruded Mo-0.3 at% Si alloy was evaluated from 25 °C to 1200 °C and showed superior fatigue life and ratcheting strain resistance as compared to pure Mo and the Mo-27 at% Re alloy (within the temperature range where data were available for comparison). The superior resistance is attributed to the high density of dislocations within the material in this mostly unrecrystallized state rather than Si in solid solution. Above 800 °C, the ratcheting strain increases and fatigue life decreases rapidly with increasing temperature and is associated with dynamic recovery.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Intermetallics and Advanced Alloy Properties · High Temperature Alloys and Creep · Titanium Alloys Microstructure and Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (26)
Show source-provided references
1. Mo–Si–B alloys: developing a revolutionary turbine-engine material10.1557/mrs2003.191 ↗
2. Mo-Si-B alloys for ultrahigh temperature applications
3. Phase stability and alloying behavior in the Mo-Si-B system10.1007/s11661-005-0164-6 ↗
4. High temperature strength of Mo–Mo3Si–Mo5SiB2 molybdenum silicides10.1016/S0966-9795(03)00044-X ↗
5. Mechanically alloyed Mo–Si–B alloys with a continuous α-Mo matrix and improved mechanical properties10.1016/j.intermet.2008.04.015 ↗
6. Yielding and flow behavior of Mo5Si3 single crystals10.1016/S1359-6462(01)01170-8 ↗
7. High-temperature compression behavior of Mo-Si-B alloys10.1016/j.actamat.2004.08.035 ↗
8. Monotonic and cyclic crack growth response of a Mo-Si-B alloy10.1016/j.actamat.2005.09.013 ↗
9. Tensile creep of Mo-Si-B alloys10.1016/j.actamat.2009.11.054 ↗
10. Creep effects on crack growth in a Mo-Si-B alloy10.1016/j.actamat.2006.09.028 ↗
11. Boron distribution and microstructure in molybdenum-boron alloys
12. Dissolved Si in Mo and its effect on the properties of Mo-Si-B alloys10.1016/j.scriptamat.2009.09.008 ↗
13. Northcott · 1956
14. “Uniaxial, load-controlled cyclic deformation of recrystallized Molybdenum sheet”10.1016/j.msea.2012.01.124 ↗
15. The tensile response of Mo, Mo-Re and Mo-Si Solid Solutions10.1016/j.ijrmhm.2013.05.005 ↗
16. The cyclic deformation and fatigue behavior of the low-carbon steel SAE-1045 in the temperature regime of dynamic strain-aging10.1016/0956-7151(93)90392-6 ↗
17. Dynamic strain aging effects on low-cycle fatigue of AISI 430F10.1016/j.msea.2009.01.047 ↗
18. Creep and low-cycle fatigue behavior of ferritic Fe-24Cr-4Al alloy in the dynamic strain aging regime: effect of aluminum addition10.1007/s11661-997-0271-7 ↗
19. Influence of temperature on a low-cycle fatigue behavior of a ferritic stainless steel10.1007/s12206-014-0616-2 ↗
20. Effects of dynamic strain aging on mechanical properties of SA508 class 3 reactor pressure vessel steel10.1007/s10853-009-3381-3 ↗
21. Cyclic deformation behavior of a low carbon steel in the temperature range between room temperature and 850K10.1007/BF00053521 ↗
22. Intergranular fracture in bcc metals10.2320/matertrans1960.29.521 ↗
23. Preparation and characterization of Mo-Re alloys
24. Influence of thin slip bands on grain boundary stress fields and microcrack initiation10.1016/j.mspro.2014.06.107 ↗
25. Uniaxial ratcheting of 20 carbon steel: macroscopic and microscopic experimental observations10.1016/j.msea.2011.03.113 ↗
26. Ratcheting and fatigue behavior of a copper alloy under uniaxial cyclic loading with mean stress10.1016/j.ijfatigue.2008.04.008 ↗