Considerations in non-propagating crack of pure titanium
Source abstract
Abstract
Abstract To verify the existing theory that non-propagating cracks (NPC) do not exist in titanium (Ti), NPC detection in industrial pure Ti was tried out. The research showed that the NPCs were discovered in specimens that have artificial defect. Two types of specimen; sharp-notched (the root radius is 0.02 mm and the depth is 0.2 mm) and micro-pitted specimens (the radius is 0.25 mm and the depth is 0.25 mm), endured the stressing of fatigue up to 10 7 cycles. It is considered that the existing theory with respect to the definition of fatigue limit of Ti should be modified. However, we could not detect the NPC in specimen without defects. This phenomenon would be due to the presumption that the NPC is extraordinarily short or crack initiation does not take place. The fatigue limit of Ti is found to not correspond to the threshold stress of crack initiation but to critical stress of crack growth. Furthermore, the measurement on the crack opening displacement (COD) of NPC in Ti reveals that the crack tip was surrounded by the region that had compressive residual stress. The crack tip was opened after stress relief annealing. Consequently, the compressive residual stress around the crack tip induced during crack growth is considered to be the prime factor causing the NPC.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Fatigue and fracture mechanics · Hydrogen embrittlement and corrosion behaviors in metals · Advanced Welding Techniques Analysis
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (20)
Show source-provided references
1. Peters · Metall. Mater. Trans. · 2000 · 31A · 157110.1007/s11661-000-0167-2 ↗
2. Jha · Metall. Mater. Trans. · 2000 · 31A · 70310.1007/s11661-000-0012-7 ↗
3. Effect of step testing and notches on the endurance limit of Ti-6Al-4V
4. Boyce · Eng. Fracture Mech. · 2001 · 68-2 · 12910.1016/S0013-7944(00)00099-0 ↗
5. Takao · Trans. JSME · 1984 · 50-453 · 104910.1299/kikaia.50.1049 ↗
6. K. Takao, H. Nishitani, in: Proceedings of the 2nd International Conference on Fatigue and Fatigue Thresholds, vol. 2, Birmingham, UK, September 3–7, 1984, Chameleon Press Limited, Birmingham, 1984, p. 827.
7. Nisitani · ZAIRYO · 1980 · 29-317 · 143
8. Takao · Trans. JSME · 1985 · 51-462 · 45010.1299/kikaia.51.450 ↗
9. Morita · Trans. JSME · 1990 · 56-529 · 191510.1299/kikaia.56.1915 ↗
10. Kim · Trans. KSME · 1998 · 22A-1 · 142
11. Elber · Eng. Fracture Mech. · 1970 · 2 · 3710.1016/0013-7944(70)90028-7 ↗
12. Elber · ASTM STP · 1971 · 486 · 230
13. Gan · Eng. Fracture Mech. · 1981 · 15-1 · 8710.1016/0013-7944(81)90108-9 ↗
14. Budiansky · J. Appl. Mech. · 1978 · 45 · 26
15. Soboyejo · Int. J. Fatigue · 1995 · 17-8 · 57710.1016/0142-1123(96)81217-5 ↗
16. Wei · Eng. Fracture Mech. · 2000 · 66 · 22310.1016/S0013-7944(00)00014-X ↗
17. Kitagawa · Trans. JSME · 1973 · 42-356 · 996
18. Behavior of small cracks in fatigue and relating phenomena
19. Kunio · ASTM STP · 1988 · 924 · 184
20. Frost · Proc. Inst. Mech. Eng. · 1959 · 173-35 · 81110.1243/PIME_PROC_1959_173_065_02 ↗