journal article·2004-10

An integrated numerical model for the prediction of Gaussian and billet shapes

J.H. Hattel, N.H. Pryds, T.B. Pedersen

Publisher page

Abstract

Separate models for the atomisation and the deposition stages were recently integrated by the authors to form a unified model describing the entire spray-forming process. In the present paper, the focus is on describing the shape of the deposited material during the spray-forming process, obtained by this model. After a short review of the models and their coupling, the important factors which influence the resulting shape, i.e. Gaussian or billet, are addressed. The key parameters, which are utilized to predict the geometry and dimension of the deposited material, are the sticking efficiency and the shading effect for Gaussian and billet shape, respectively. From the obtained results, the effect of these parameters on the final shape is illustrated.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Plant Surface Properties and Treatments · Fluid Dynamics and Heat Transfer · Aerosol Filtration and Electrostatic Precipitation

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (20)

Show source-provided references
1. E.J. Lavernia, Y. Wu, Spray Atomization and Deposition, Wiley, Chichester, England, 1996.
2. Annavarapu · Int. J. Powder Metall. · 1993 · 29 · 331
3. Lavernia · Int. J. Rapid Solidification · 1988 · 4 · 89
4. Mathur · Acta Metall. · 1989 · 37 · 42910.1016/0001-6160(89)90227-7 ↗
5. P.S. Grant, B. Cantor, L. Katgerman, Acta Metall. Mater. 41 (1993) 3097.10.1016/0956-7151(93)90039-U ↗
6. P. Ottosen, Numerical Simulation of Spray Forming, Ph.D. Thesis Laboratory of Thermal Processing of Materials, Insttitude of Manufacturing Engineering, Technical University of Denmark, 1993.
7. U. Fritsching, H. Zhang, K. Bauckhage, in: J.V. Wood (Ed.), Second International Conference on Spray Forming, Woodhead Publishing, p. 35.
8. Zhou · Int. J. Non-Equilib. Process. · 1997 · 10 · 95
9. Doherty · Int. J. Powder Metall. · 1997 · 33 · 50
10. Hattel · Mod. Simul. Mater. Sci. Eng. · 1999 · 7 · 41310.1088/0965-0393/7/3/309 ↗
11. Pryds · Mod. Simul. Mater. Sci. Eng. · 1999 · 7 · 43110.1088/0965-0393/7/3/310 ↗
12. T.B. Pedersen, J.H. Hattel, N.H. Pryds, A.S. Pedersen, M. Buchholz, V. Uhlenwinkel, (2000), A new integrated numerical model for spray atomization and deposition: comparison between numerical results and experiments, in: Proceedings of the International Conference on Spray Depostion and Melt Atomization, SDMA I, June 2000, Bremen, Germany, pp. 813–823.
13. T.B. Pedersen, Spray Forming—A New Integrated Numerical Model, Ph.D. Thesis, DTU, Lyngby, Denmark, December 2002.
14. C.T. Crowe, M. Sommerfeld, Y. Tsuji, Multiphase Plows with Droplets and Particles, CRC Press, 1997.
15. Pryds · Acta Mater. · 2002 · 50 · 407410.1016/S1359-6454(02)00205-7 ↗
16. C. Kramer, V. Uhlenwinkel, K. Bauckhage, Spray forming: the sticking efficiency and its dependency on affecting parameters, TMS Annual meeting, February 15–19, San Antonio, Texas 1998.
17. Mathur · Mater. Sci. Eng. · 1991 · A 42 · 26110.1016/0921-5093(91)90665-A ↗
18. Seok · Metall. Mater. Trans. B · 1998 · 29B · 69910.1007/s11663-998-0105-z ↗
19. Seok · Metall. Mater. Trans. A · 2000 · 31 A · 147910.1007/s11661-000-0266-0 ↗
20. T.B. Pedersen, J.H. Hattel, N.H. Pryds, A geometrical model for prediction of the billet shape in spray forming, Science of metastable and nanocrystalline alloys—structure, properties and modelling, in: Proceedings of the 22nd RISØ International Symposium on Materials Science, 2001, pp. 353–358.