journal article·2005-01

Investigation of the latent heat associated with the solidification of an Al–TiB2 composite

Y.M. Youssef, R.J. Dashwood, P.D. Lee

Materials Science and Engineering: A· Volume 391· Issue 1-2
Publisher page

Abstract

Differential scanning calorimetry was used to measure the latent heat evolved or absorbed during solidification or melting of a composite made from commercial-purity aluminium reinforced with TiB2 particulate. The measured latent heat was up to 10% less than that expected assuming a rule of mixtures. The analysis of the particles revealed that up to 20 at.% of Ti is substituted by Al in the boride. The concomitant increase in volume fraction of particulate (Al3Ti) and the associated reduction in Al accounted for the latent heat discrepancy. It was previously suggested that strain energy could explain the discrepancy; however, X-ray and neutron diffraction stress measurements showed that this is unlikely. © 2004 Elsevier B.V. All rights reserved.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Aluminum Alloys Composites Properties · Advanced ceramic materials synthesis · Aluminum Alloy Microstructure Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (25)

Show source-provided references
1. Tjong · Mater. Sci. Eng. R · 2000 · 29 · 4910.1016/S0927-796X(00)00024-3 ↗
2. P. Davies, J.L.F. Kellie, J.V. Wood, in: F.H. Froes, T. Khan (Eds.), Proceedings of the Synthesis, Processing, and Modelling of Advanced Materials, Paris, 11–13 September 1991, Trans Tech Publications Ltd., Zurich, 1993, pp. 357–361.
3. McCartney · Int. Mater. Rev. · 1989 · 34 · 24710.1179/imr.1989.34.1.247 ↗
4. Tee · Compos. Struct. · 1999 · 47 · 58910.1016/S0263-8223(00)00030-1 ↗
5. Asthana · J. Mater. Sci. · 1998 · 33 · 195910.1023/A:1004334228105 ↗
6. Wood · Mater. Sci. Technol. · 1993 · 9 · 83310.1179/mst.1993.9.10.833 ↗
7. P.D. Lee, J.F. Major, L. Hofmann, in: C. Kim, C.-W. Kim (Eds.), Proceedings of the Numerical Simulation of Casting Solidification in Automotive Applications, TMS, Warrendale, PA, 1991, pp. 231–251.
8. Suresh · 1993
9. Asthana · J. Mater. Sci. · 1993 · 28 · 541410.1007/BF00367810 ↗
10. Dong · High Temp.–High Press. · 2000 · 32 · 31110.1068/htwu260 ↗
11. Mills · 2002
12. Schumacher · Mater. Sci. Technol. · 1998 · 14 · 39410.1179/mst.1998.14.5.394 ↗
13. Tee · Wear · 2000 · 240 · 5910.1016/S0043-1648(00)00337-9 ↗
14. Ma · J. Mater. Sci. · 1996 · 31 · 74110.1007/BF00367894 ↗
15. Yang · Metall. Trans. · 1998 · 29B · 63510.1007/s11663-998-0098-7 ↗
16. Kubaschewski · 1993
17. Youssef · Mater. Sci. Forum · 2002 · 396–402 · 25910.4028/www.scientific.net/MSF.396-402.259 ↗
18. Feng · Mater. Lett. · 1997 · 32 · 27510.1016/S0167-577X(97)00045-1 ↗
19. Zupanic · Metallurgy · 1999 · 53 · 125
20. Structure of intermetallic compounds and phases
21. P.S. Cooper, A. Hardman, D. Boot, E. Burhop, in: P.N. Crepeau (Ed.), Proceedings of the TMS Light Metals 2003, TMS, San Diego, CA, 2003, pp. 923–928.
22. Allen · Acta Metall. · 1992 · 40 · 236110.1016/0956-7151(92)90155-8 ↗
23. Withers · Acta Metall. · 1989 · 37 · 306110.1016/0001-6160(89)90341-6 ↗
24. Powder Diffraction File, National Bureau of Standards, USA, 1990.
25. Mondolfo · 1976