journal article·2008-06

Modelling the transition from strengthening to softening due to grain boundaries

X.H. Zeng, P. Eisenlohr, W. Blum

Publisher page

Abstract

Abstract Published data on pure Cu at or close to its saturation state of deformation suggests a Hall–Petch relation of flow stress at ambient temperature in the range of grain sizes 1 μ m > d > 10 nm [W. Blum, Y.J. Li, J. Chen, X.H. Zeng, K. Lu, Int. J. Mater. Res. 97 (2006) 1661–1666] while for elevated temperatures ultrafine-grained Cu produced by severe plastic deformation exhibits softening relative to conventional grain sizes d > 10 μ m [Y.J. Li, X.H. Zeng, W. Blum, Acta Mater. 52 (2004) 5009–5018]. Presuming grain boundaries as impenetrable dislocation obstacles, these observations are rationalized by (i) a reduction of the mean slipped area and corresponding shift in the main location for dislocation storage from grain interior to boundaries with decreasing d; (ii) thermally activated dissolution of dislocation dipoles occurring faster at boundaries than within the grain interior owing to different coefficients of diffusion. A simple statistical dislocation model is derived from these ideas and compares to experimental results in semi-quantitative agreement.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Microstructure and mechanical properties · Fusion materials and technologies · Microstructure and Mechanical Properties of Steels

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (19)

Show source-provided references
1. W. Blum, Y.J. Li, J. Chen, X.H. Zeng, K. Lu, Int. J. Mater. Res. 97 (2006) 1661–1666.10.3139/146.101398 ↗
2. Li · Acta Mater. · 2004 · 52 · 500910.1016/j.actamat.2004.07.003 ↗
3. Meyers · Progr. Mater Sci. · 2006 · 51 · 42710.1016/j.pmatsci.2005.08.003 ↗
4. Höppel · Philos. Mag. A. · 2002 · 9 · 178110.1080/01418610208235689 ↗
5. Blum · Phys. Stat. Sol. A · 2004 · 201 · 291510.1002/pssa.200406878 ↗
6. Y.J. Li, PhD thesis, University of Erlangen-Nürnberg, Cuvillier Verlag, Göttingen, 2006.
7. Li · Mater. Sci. Eng. A · 2005 · 410–411 · 45110.1016/j.msea.2005.08.107 ↗
8. Kuhlmann-Wilsdorf · Trans. Met. Soc. AIME · 1962 · 224 · 1047
9. U.F. Kocks, Proceedings of the Conference of the 50th Anniversary Meeting on Dislocations and Properties of Real Materials, The Institute of Metals, London, 1985, pp. 125–143.
10. Nes · Progr. Mater. Sci. · 1998 · 41 · 12910.1016/S0079-6425(97)00032-7 ↗
11. Roters · Acta Mater. · 2000 · 48 · 418110.1016/S1359-6454(00)00289-5 ↗
12. Nix · Metall. Trans. · 1985 · 16A · 221510.1007/BF02670420 ↗
13. Li · Metall. Trans. · 1970 · 1 · 114510.1007/BF02900225 ↗
14. Frost · 1982
15. W. Blum, P. Eisenlohr, V. Sklenička, in: M., Zehetbauer, Y.T., Zhu, (Eds.), Bulk Nanostructured Materials, Wiley-VCH, in press.
16. Kocks · Progr. Mater. Sci. · 2003 · 48 · 17110.1016/S0079-6425(02)00003-8 ↗
17. Blum · Phys. Stat. Sol. (A) · 2001 · 184 · 25710.1002/1521-396X(200103)184:1<257::AID-PSSA257>3.0.CO;2-I ↗
18. Blum · Metall. Trans. · 2002 · 33A · 29110.1007/s11661-002-0090-9 ↗
19. Chen · Scripta Mater. · 2006 · 191310.1016/j.scriptamat.2006.02.022 ↗