Deformation pattern and strain hardening in a highly textured 8090 Al–Li alloy sheet
Source abstract
Abstract
Abstract Structure-deformation pattern analysis was made on a highly textured 8090 Al–Li alloy sheet deformed in tension. It is shown that the sharp β-fiber type crystallographic texture induces a strong orientation variation in the mechanical properties and in the deformation structure. The soft orientation is 55° in respect to the rolling direction (RD), while the hard orientation is parallel to the RD. Both results are predicted from the detected texture by the relaxed constrained Taylor deformation model (RC). Cellular dislocation substructure was observed in the samples deformed parallel to the RD. However, in the samples tested 55° to the RD, coplanar dislocation arrangement was preserved even up to 30% elongation. In the hard orientation, the strain hardening ability is quickly exhausted. This is due to the effect of dynamic recovery occurring from the onset of deformation. In the soft orientation, the strain hardening is better sustained as a result of easy glide of the coplanar dislocations, on the primary slip systems, through the grain structure. The pattern of surface slip traces is compatible with the dislocation substructure arrangement observed by transmission electron microscopy (TEM).
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Microstructure and mechanical properties · Aluminum Alloy Microstructure Properties · Metallurgy and Material Forming
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (45)
Show source-provided references
1. Rioja · Mater. Sci. Eng. · 1998 · A257 · 10010.1016/S0921-5093(98)00827-2 ↗
2. M.J. Bull, D.J. Lloyd, Proceedings of the Third International Al–Li Conference, Institute of Metals, 1986, p. 402.
3. Jata · Mater. Sci. Forum · 1996 · 217–222 · 64710.4028/www.scientific.net/MSF.217-222.647 ↗
4. Vasudevan · Met. Trans. · 1988 · A19 · 73110.1007/BF02649289 ↗
5. A.K. Vasudevan, W.G. Fricke, M.A. Przstypa, S. Panchanadeeswaran, Proceedings of ICOTOM-8, The Metallurgical Society, 1988, p. 1071.
6. Chakrabarti · Mater. Sci. Forum · 1996 · 217–222 · 108510.4028/www.scientific.net/MSF.217-222.1085 ↗
7. Denzer · ASTM STP · 1982 · 761 · 328
8. Hales · Mater. Sci. Eng. · 1998 · A257 · 15310.1016/S0921-5093(98)00834-X ↗
9. Hargater · Mater. Sci. Eng. · 1998 · A257 · 8710.1016/S0921-5093(98)00826-0 ↗
10. Crooks · Mater. Sci. Eng. · 1998 · A257 · 14510.1016/S0921-5093(98)00833-8 ↗
11. Spriano · Mater. Sci. Eng. · 1998 · A257 · 13410.1016/S0921-5093(98)00831-4 ↗
12. Hirsh · J. Phys. Coll. C3 Tome · 1987 · 48 · 605
13. Harris · 1989 · 1061
14. Englar · 1992 · 307
15. Barlat · Scr. Met. Mater. · 1992 · 27 · 112110.1016/0956-716X(92)90585-3 ↗
16. Lee · Mater. Sci. Eng. · 1999 · A265 · 10010.1016/S0921-5093(98)01150-2 ↗
17. Dillamore · J. Inst. Met. · 1972 · 100 · 50
18. G.J. Davies, J. Organomet. Chem. (1976) 21.10.1007/BF03354291 ↗
19. Bunge · Z. Metallkde. · 1985 · 76 · 457
20. Gregson · Mater. Sci. Tech. · 1988 · 4 · 71310.1179/mst.1988.4.8.713 ↗
21. R. Mahmudi, M. Zandrahimi, W.T. Roberts, D.V. Wilson, Proceedings of the Eighth International Light Metals Congress, Leoben-Viena, 1987, p. 576.
22. Romhanji · Aluminium · 1993 · 69 · 6
23. E. Romhanji, S. Tadic, M. Burzic, V. Milenkovic, Proceedings of EUROMAT 95, Padua/Venice, September 1995, p. 549.
24. Romhanji · J. Met. · 1997 · 3 · 29
25. S. Fox, H.M. Flower, D.S. McDarmaid, Proceedings of the Aluminium Alloys — Their Physical and Mechanical Properties, Virginia, vol. 1, 1986, p. 939.10.1016/0036-9748(86)90215-2 ↗
26. M. Peters, K. Welpman, W. Zink, T.H. Sanders, Proceedings of the Third International Al–Li Conference, Institute of Metals, 1986, p. 239.
27. Anon®: The software used for the ODF analysis, developed at the University of Birmingham, UK.
28. Taylor · J. Inst. Met. · 1938 · 62 · 307
29. Bishop · Phil. Mag. · 1954 · 42 · 41410.1080/14786445108561065 ↗
30. Hirsch · Acta Met. · 1988 · 36 · 288310.1016/0001-6160(88)90173-3 ↗
31. H. Honneff, H. Mecking, Proceedings of the Fifth International Conference on the Textures of Materials (ICOTOM 5), Springer, vol. 1, 1978, p. 265.10.1007/978-3-642-81313-9_24 ↗
32. Welch · Z. Metallkde. · 1983 · 74 · 233
33. Bishop · Phil. Mag. · 1954 · 42 · 129810.1080/14786444108561385 ↗
34. Bunge · Kristal und Technik. · 1970 · 5 · 14510.1002/crat.19700050112 ↗
35. Lankford · Trans. Am. Soc. Met. · 1950 · 42 · 1197
36. Bowen · Mater. Sci. Tech. · 1990 · 6 · 105810.1179/mst.1990.6.11.1058 ↗
37. Vadon · J. Phys. Coll. C3 Tome · 1987 · 48 · C3
38. Gregson · Acta Met. · 1985 · 33 · 52710.1016/0001-6160(85)90095-1 ↗
39. Hirsch · 1964
40. Bell · Acta Met. · 1964 · 12 · 124710.1016/0001-6160(64)90109-9 ↗
41. Honeff · 1978 · 265
42. D.V. Wilson, Met. Tech. (1975) 8.
43. Johnston · Phil. Mag. · 1965 · 12 · 30510.1080/14786436508218873 ↗
44. A.J. McEvily, T.L. Johnston, Proceedings of the First International Conference on Fracture, vol. 2, The Japanese Society for Strength and Fracture of Materials, Sendai, 1966, p. 515.
45. Williams · Scr. Met. · 1974 · 8 · 62510.1016/0036-9748(74)90009-X ↗