journal article·2013-11

Physical interpretation of creep in single crystal René N4TM based on a phenomenological model

C.Girish Shastry, V.Sivakumar G. Kelekanjeri, T. Vishwanath, Shamik Chaudhuri

Publisher page

Abstract

Abstract Creep and rafting in Ni-based single crystal Rene N4 is described using reported phenomenological models after modifying the creep model to represent the rafting induced hardening of the structure against creep and the greater propensity for shearing of γ ′ as the structure rafts and dislocation density in the channels and γ / γ ′ interface builds up. The proposed model can describe the creep strain evolution at 1144 K over the stress range 241–413 MPa. The rafting model is shown to provide an adequate representation of horizontal and vertical channel width evolution at 1144 K and 1255 K. The variation of the physical parameters in the creep model viz., back stress, dislocation density and shear rate is rationalized scientifically thereby substantiating the physical basis of the model. The development of back stress in the channels is explained mechanistically through the deposition of dislocation segments at γ / γ ′ interface by the Orowan loops expanding in the channel and the recovery of the interfacial dislocation networks. The evolution in Orowan stress consequent to rafting and its effect on dislocation activity are elucidated. The evolution of the kinetics for dynamic and static recovery processes which accompany creep strain accumulation has also been explained mechanistically.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Microstructure and mechanical properties · High Temperature Alloys and Creep · Aluminum Alloy Microstructure Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (22)

Show source-provided references
1. Fedelich · Mater. Sci. Eng. A · 2009 · 510–511 · 27310.1016/j.msea.2008.04.089 ↗
2. Tinga · Comput. Mater. Sci. · 2009 · 47 · 47110.1016/j.commatsci.2009.09.013 ↗
3. Fedelich · Int. J. Plast. · 2002 · 18 · 110.1016/S0749-6419(00)00045-0 ↗
4. Fedelich · Comput. Mater. Sci. · 1999 · 16 · 24810.1016/S0927-0256(99)00067-1 ↗
5. Ghosh · Acta Metall. Mater. · 1990 · 38 · 197710.1016/0956-7151(90)90309-5 ↗
6. MacLachlan · Comput. Mater. Sci. · 2002 · 25 · 12910.1016/S0927-0256(02)00257-4 ↗
7. Ma · Acta Mater. · 2008 · 56 · 165710.1016/j.actamat.2007.11.031 ↗
8. Svoboda · Acta Mater. · 1998 · 46 · 342110.1016/S1359-6454(98)00043-3 ↗
9. Nabarro · Acta Mater. · 1996 · 44 · 318910.1016/1359-6454(95)00423-8 ↗
10. Zhou · Acta Mater. · 2008 · 56 · 615610.1016/j.actamat.2008.08.027 ↗
11. Ichitsubo · Acta Mater. · 2003 · 51 · 403310.1016/S1359-6454(03)00224-6 ↗
12. Ohashi · Acta Mater. · 1997 · 45 · 180110.1016/S1359-6454(96)00324-2 ↗
13. Epishin · Mater. Sci. Eng. A · 2009 · 510–511 · 26210.1016/j.msea.2008.04.135 ↗
14. Vander Voort · 2004 · 820
15. V. Sivakumar G. Kelekanjeri, Global Research, General Electric, unpublished results.
16. Mallikarjun Karadge, Global Research, General Electric, unpublished results.
17. Xingfua · Mater. Sci. Eng. A · 2009 · 499 · 35210.1016/j.msea.2008.09.038 ↗
18. Deb · 2001
19. Roebuck · Scr. Mater. · 2001 · 44 · 91710.1016/S1359-6462(00)00662-X ↗
20. Růžičková · Mater. Sci. Eng. · 1981 · 50 · 5910.1016/0025-5416(81)90086-0 ↗
21. Kamaraj · Mater. Sci. Eng. A · 2001 · 319–321 · 79610.1016/S0921-5093(01)00950-9 ↗
22. Srinivasan · Acta Mater. · 2000 · 48 · 486710.1016/S1359-6454(00)00292-5 ↗