journal article·2007-05

Effect of oil jet peening duration on surface modification and fatigue behavior of medium carbon steel, AISI 1040

A. Sahaya Grinspan, R. Gnanamoorthy

Materials Science and Engineering: A· Volume 456· Issue 1-2
Publisher page

Abstract

Introduction of compressive residual stress on the surface of dynamically loaded structural members improves the fatigue life. Oil jet peening is a new surface modification technique that can be potentially applied to introduce compressive residual stresses. Effect of oil jet peening on the surface modification and fatigue behavior of medium carbon steel, AISI 1040, is reported. The compressive residual stress on the surface of oil jet peened specimen was in the order of 332 MPa and the depth of compressive stress induced was about 50 μm. The surface hardness increased due to the oil jet peening. Oil jet peening improved the fatigue strength under cantilever-bending conditions to about 19% compared to unpeened specimens.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Surface Treatment and Residual Stress · Erosion and Abrasive Machining · High-Velocity Impact and Material Behavior

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (22)

Show source-provided references
1. Kunaporn · 2001
2. Daniewicz · Trans. ASME, J. Eng. Mater. Tech. · 1999 · 121 · 33610.1115/1.2812383 ↗
3. Odhiambo · Int. J. Fatigue · 2003 · 25 · 121710.1016/S0142-1123(03)00121-X ↗
4. Pai · Wear · 2002 · 252 · 97010.1016/S0043-1648(02)00060-1 ↗
5. Sahara Grinspan · Surf. Coat. Technol. · 2006 · 201 · 176810.1016/j.surfcoat.2006.03.002 ↗
6. Sahaya Grinspan · Appl. Surf. Sci. · 2006 · 253 · 98910.1016/j.apsusc.2006.02.060 ↗
7. Sahaya Grinspan · Appl. Surf. Sci. · 2006 · 253 · 998
8. A. Sahaya Grinspan, R. Gnanamoorthy, Trans. ASME, J. Manuf. Sci. Eng., in press.
9. Aerospace Material Specification, AMS 2439L, SAE, USA, 1993.
10. Puenteleon · 2001
11. Tonshoff · Ann. CIRP · 1999 · 16 · 113
12. Heymann · J. Appl. Phys. · 1969 · 40 · 511310.1063/1.1657361 ↗
13. Hammitt · 1980
14. Zang · Scripta Mater. · 2005 · 52 · 48510.1016/j.scriptamat.2004.11.003 ↗
15. Zang · Scripta Mater. · 2005 · 52 · 101110.1016/j.scriptamat.2005.01.026 ↗
16. de los Rios · Int. J. Fatigue · 1995 · 17 · 49310.1016/0142-1123(95)00044-T ↗
17. Hammond · Eng. Fract. Mech. · 1990 · 37 · 37310.1016/0013-7944(90)90048-L ↗
18. Qin · Surf. Coat. Technol. · 2006 · 200 · 536410.1016/j.surfcoat.2005.06.024 ↗
19. Tekeli · Mater. Lett. · 2002 · 37 · 60410.1016/S0167-577X(02)00838-8 ↗
20. Hammersley · Opt. Lasers Eng. · 2000 · 34 · 32710.1016/S0143-8166(00)00083-X ↗
21. Soyama · JSME Int. J. · 2000 · 43A · 17310.1299/jsmea.43.173 ↗
22. Soyama · J. Mater. Sci. Lett. · 2001 · 20 · 126310.1023/A:1010947528358 ↗