journal article·2003-02

Failure modes in plasma-sprayed thermal barrier coatings

K.W Schlichting, N.P Padture, E.H Jordan, M Gell

Materials Science and Engineering: A· Volume 342· Issue 1-2
Publisher page

Abstract

Commercial plasma-sprayed thermal barrier coatings (TBCs) were investigated in an effort to elucidate the failure modes during thermal-cycling. Residual stresses in the thermally grown oxide (TGO) was measured using the Cr3+ photoluminescence piezo-spectroscopy (PLPS) method and the microstructures of the TBCs were characterized as a function of thermal cycles. The average residual stress in the TGO was found to be of the order of 1 GPa. The average thermal-cyclic life of the TBCs was found to be ∼350 cycles. Microstructural observations revealed that as the TGO thickened, cracking occurred at the bond-coat/TGO interface, and in some instances cracking also occurred at the TGO/top-coat interface, but primarily at crests of bond-coat undulations. The bond-coat-TGO separation resulted in ‘layering’ of the TGO at crests due to enhanced TGO thickening in those regions. In the troughs of bond-coat undulations, cracking occurred within the top-coat when the TGO was thick. Thus, the primary failure modes in these TBCs were: (i) cracking of the bond-coat/TGO interface; (ii) cracking within the top-coat; and (iii) linking of these microcracks by fracture of the TGO. A semi-quantitative failure model has been used to rationalize some of the observed cracking modes. Based on this analysis some suggestions are made for improving TBC durability.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: High-Temperature Coating Behaviors · Surface Treatment and Coatings · Material Properties and Applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (36)

Show source-provided references
1. Jones · 1996 · 194
2. Evans · Prog. Mater. Sci. · 2001 · 46 · 50510.1016/S0079-6425(00)00020-7 ↗
3. Padture · Science · 2002 · 296 · 28010.1126/science.1068609 ↗
4. M.B. Beardsley, in: J. Fairbanks (Ed.), Proceedings of the 1990 Coatings for Advanced Heat Engines Workshop, Department of Energy, Washington DC, USA, 1990, p. 1153.
5. Miller · Thin Solid Film · 1982 · 95 · 26510.1016/0040-6090(82)90019-0 ↗
6. Wu · Thin Solid Films · 1989 · 172 · 18510.1016/0040-6090(89)90648-2 ↗
7. Lee · Mater. Sci. Eng. · 1989 · A121 · 46710.1016/0921-5093(89)90803-4 ↗
8. Shillington · Acta Mater. · 1999 · 47 · 129710.1016/S1359-6454(98)00407-8 ↗
9. K.W. Schlichting, Ph.D. Dissertation, University of Connecticut, Storrs, CT, 2000.
10. Rabiei · Acta Mater. · 2000 · 48 · 396310.1016/S1359-6454(00)00171-3 ↗
11. Padture · Acta Mater. · 2001 · 49 · 225110.1016/S1359-6454(01)00130-6 ↗
12. Christensen · Appl. Phys. Lett. · 1996 · 69 · 375410.1063/1.117182 ↗
13. Schlichting · Mater. Sci. Eng. · 2000 · A291 · 6810.1016/S0921-5093(00)00973-4 ↗
14. Gong · Oxid. Met. · 1998 · 50 · 35510.1023/A:1018848607100 ↗
15. Nychka · Surf. Coat. Technol. · 2002 · 146 · 110
16. Sohn · Surf. Coat. Technol. · 2002 · 146 · 102
17. K. Vaidyanathan, Ph.D. Dissertation, University of Connecticut, Storrs, CT, 2001.
18. Schumann · Oxid. Met. · 2000 · 53 · 25910.1023/A:1004585003083 ↗
19. Clarke · Acta Mater. · 1999 · 47 · 174910.1016/S1359-6454(99)00078-6 ↗
20. W. Pompe, unpublished work, 2001.
21. Wang · Acta Mater. · 1999 · 47 · 69910.1016/S1359-6454(98)00328-0 ↗
22. Hsueh · Mater. Sci. Forum · 1999 · 308–311 · 44210.4028/www.scientific.net/MSF.308-311.442 ↗
23. Hsueh · Scripta Mater. · 2000 · 42 · 78110.1016/S1359-6462(99)00430-3 ↗
24. R.W. Davidge, Mechanical Behaviour of Ceramics, Cambridge University Press, London, (1979) 85–87.
25. R.M. Christensen, Mechanics of Composite Materials, Kreiger Co, Malabar, FL, USA (1979) 47–50.
26. Evans · Prog. Mater. Sci. · 2001 · 46 · 24910.1016/S0079-6425(00)00007-4 ↗
27. J.T. DeMasi, K.D. Sheffler, M. Ortiz, M., NASA Contractor Report No. 182230, 1989.
28. Rejda · Surf. Coat. Technol. · 1999 · 113 · 21810.1016/S0257-8972(98)00843-3 ↗
29. Shum · Eng. Fract. Mech. · 1990 · 37 · 10710.1016/0013-7944(90)90335-E ↗
30. Cook · Int. J. Eng. Sci. · 1972 · 10 · 67710.1016/0020-7225(72)90063-8 ↗
31. Beuth · Int. J. Sol. Struct. · 1992 · 28 · 165710.1016/0020-7683(92)90015-L ↗
32. He · Int. J. Sol. Struct. · 1989 · 25 · 105310.1016/0020-7683(89)90021-8 ↗
33. D.M. Gray, Y.C. Lau, C.A. Johnson, M.P. Borom, W.A. Nelson, U.S. Patent, No. 6,180,184, 2001.
34. Vaidyanathan · Surf. Coat. Technol. · 2000 · 133–134 · 2810.1016/S0257-8972(00)00891-4 ↗
35. N.P. Padture, M. Gell, P.G. Klemens, U.S. Patent, No. 6,015,630, 2000.
36. M.J. Maloney, U.S. Patent, No. 6,117,560, 2000.