journal article·2002-09

Transformation-mismatch plasticity of NiAl/ZrO2 composites—finite-element modeling

Peter Zwigl, David C Dunand

Materials Science and Engineering: A· Volume 335· Issue 1-2
Publisher page

Abstract

A coupled thermo-mechanical finite-element model was developed to describe transformation-mismatch plasticity resulting from mismatch stresses produced by allotropic particles within a creeping matrix. A composite consisting of a NiAl matrix with 10 vol.% zirconia allotropic particles was modeled in two dimensions for a range of externally-applied stress values. The instantaneous composite strain developed during the zirconia transformation is found to increase linearly with the applied stress, in agreement with continuum-mechanical, closed-form models for transformation-mismatch plasticity. This instantaneous strain is smaller than the total strain accumulated over a half temperature cycle, indicating that mismatch stresses produced during the transformation relax by matrix creep long after the particles have transformed. Also, the total composite strain calculated after a full temperature cycle is in good agreement with strains determined experimentally on a NiAl–10% ZrO2 composite. Finally, the internal stress distribution within the transforming composite is determined numerically and compared to simple analytical averages. © 2002 Elsevier Science B.V. All rights reserved.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Intermetallics and Advanced Alloy Properties · Advanced ceramic materials synthesis · Aluminum Alloys Composites Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (24)

Show source-provided references
1. T.G. Nieh, J. Wadsworth, O.D. Sherby, Superplasticity in Metals and Ceramics, Cambridge University Press, Cambridge, UK, 1997.10.1017/CBO9780511525230 ↗
2. Dunand · 1997 · 1821
3. Dunand · Acta Mater. · 1996 · 44 · 106310.1016/1359-6454(95)00224-3 ↗
4. Schuh · Scripta Mater. · 1999 · 40 · 130510.1016/S1359-6462(99)00068-8 ↗
5. Schuh · Int. J. Plastic. · 2001 · 17 · 31710.1016/S0749-6419(00)00038-3 ↗
6. Zwigl · Metall. Mater. Trans. · 1998 · 29 · 56510.1007/s11661-998-0138-6 ↗
7. Schuh · Acta Mater. · 1998 · 46 · 566310.1016/S1359-6454(98)00252-3 ↗
8. Zwigl · Mater. Sci. Eng. · 2001 · 298 · 6310.1016/S0921-5093(00)01343-5 ↗
9. Greenwood · Proc. R. Soc. Lond. A · 1965 · 283 · 40310.1098/rspa.1965.0029 ↗
10. Ganghoffer · Eur. J. Mech. A/Solids · 1993 · 12 · 21
11. Levitas · J. Phys. IV · 1996 · 6 · C1-30910.1051/jp4:1996130 ↗
12. P. Zwigl, D.C. Dunand, Mater. Sci. Eng. A262 (1999) 166–172.10.1016/S0921-5093(98)00991-5 ↗
13. Zhang · Scripta Metall. Mater. · 1990 · 24 · 215110.1016/0956-716X(90)90502-8 ↗
14. Zhang · Scripta Metall. Mater. · 1991 · 25 · 228510.1016/0956-716X(91)90016-T ↗
15. Hibbet, Karlsson, Sorensen, abaqus (version 5.5), Providence RI, vol. pp.
16. Geiger · 1994
17. M.B. Bever (Ed.), Encyclopedia of Materials Science and Engineering, Pergamon Press, Oxford, 1986.
18. Noebe · Intern. Mater. Rev. · 1993 · 38 · 19310.1179/imr.1993.38.4.193 ↗
19. J. Shackelford, W. Alexander (Eds.), The CRC Materials Science and Engineering Handbook, CRC Press, Boca Raton, FL, 1992.
20. Y.S. Touloukian (Ed.), Thermal Conductivity of Metallic Elements and Alloys, IFI/Plenum, New York, 1970.10.1007/978-1-4615-9600-4_1 ↗
21. Miracle · Acta Metall. Mater. · 1993 · 41 · 64910.1016/0956-7151(93)90001-9 ↗
22. Y.S. Touloukian, R.K. Kirby, R.E. Taylor, P.D. Desai (Eds.), Thermal Expansion: Nonmetallic Solids, Plenum, New York, 1977.10.1007/978-1-4757-1631-3 ↗
23. Clark · 1981 · 189
24. Darolia · J. Metals · 1991 · 43 · 44