Temperature dependence of the yield stress of an FeAl base alloy
Source abstract
Abstract
Abstract The influence of temperature on the yield stress in Fe–45Al–4Cr–0.1Zr–0.02B (at.%) alloy after casting and homogenising (1273 K/72 h) was studied by means of transverse bending tests in argon atmosphere. Prior to studies the alloy was not annealed at low temperatures to remove retained vacancies. The yield stress shows an anomalous temperature dependence with a peak at 773 K. Measurements of electrical resistivity of alloy annealed at 1273 K/72 h and alloy additionally deformed (e=0.5%) at the temperature of yield stress peak (773 K) showed close resistivity values, proving a similar concentration of defects in both cases. Thermal vacancies originating in mechanical test temperature are not the main reason a temperature anomaly of the yield stress in FeAl alloys.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Intermetallics and Advanced Alloy Properties · Metallurgical and Alloy Processes · Advanced Materials Characterization Techniques
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (27)
Show source-provided references
1. Vedula · Mater. Res. Soc. Symp. Proc. · 1987 · 81 · 38110.1557/PROC-81-381 ↗
2. Baker · Mater. Sci. Eng. · 1987 · A96 · 14710.1016/0025-5416(87)90549-0 ↗
3. Chang · Metall. Trans. · 1990 · A21 · 302710.1007/BF02647223 ↗
4. Baker · Acta Metall. · 1995 · 43 · 172310.1016/0956-7151(94)00369-S ↗
5. Yoshimi · Acta Metall. · 1995 · 43 · 414110.1016/0956-7151(95)00098-G ↗
6. Morris · Intermetallics · 1997 · 5 · 24510.1016/S0966-9795(96)00095-7 ↗
7. Saintfort · Mem. Sci. Rev. Met. · 1963 · 60 · 125
8. Morgund · Acta Metall. · 1968 · 16 · 86710.1016/0001-6160(68)90107-7 ↗
9. M.G. Mendiratta, S.K. Ehlers (Eds.), Proc. 3rd Int. Conf. On Rapid Solidification Processing, NBS, Gaithersburg, MD, USA, 1983, p. 240.
10. 1993
11. Klein · Scr. Metall. · 1994 · 30 · 141310.1016/0956-716X(94)90238-0 ↗
12. Crimp · Mater. Sci. Eng. · 1986 · A78 · 19310.1016/0025-5416(86)90323-X ↗
13. Xiao · Scr. Metall. · 1993 · 28 · 141110.1016/0956-716X(93)90491-A ↗
14. J. Barcik, A. Gierek, M. Kupka, T. Mikuszewski, T. Prandzioch, K. Stepien, Technologiczne aspekty wytapiania i odlewania stopów na osnowie fazy miedzymetalicznej typu FeAl (Technological Aspects of FeAl Intermetallics Melting and Casting), Hutnik i Wiadomosci Hutnicze, 2000 (in Polish).
15. J. Rasek, Kinetyka zjawisk wydzielania i rozpuszczania w roztworach stalych aFe-N/C (Kinetics of Precipitation and Dissolution in aFe-N/C Solid Solutions), U.Sl. Katowice, 1983, p. 22 (in Polish).
16. C.T. Liu, V.K. Sikka, C.G. McKamey, Alloy Development of FeAl Aluminide Alloys for Structural Use in Corrosion Environments, ORNL/TM-12199, Oak Ridge, 1993, p. 363.10.2172/6136151 ↗
17. Reimann · Intermetallics · 1999 · 7 · 43710.1016/S0966-9795(98)00104-6 ↗
18. Carleton · Intermetallics · 1995 · 3 · 43310.1016/0966-9795(94)00041-I ↗
19. George · Intermetallics · 1998 · 6 · 75910.1016/S0966-9795(98)00063-6 ↗
20. Morris · Philos. Mag. · 1994 · A69 · 96110.1080/01418619408242530 ↗
21. Kogachi · Mater. Sci. Eng. · 1997 · A230 · 12410.1016/S0921-5093(97)00016-6 ↗
22. Kogachi · Scr. Mater. · 1998 · 39 · 15910.1016/S1359-6462(98)00145-6 ↗
23. Ren · Scr. Mater. · 1999 · 41 · 90710.1016/S1359-6462(99)00235-3 ↗
24. Schneibel · Mater. Sci. Eng. · 1998 · A258 · 18110.1016/S0921-5093(98)00932-0 ↗
25. Mayer · Phys. Stat. Sol. · 1995 · B191 · 28310.1002/pssb.2221910205 ↗
26. I.I. Novikov, Defekty kristallitscheskogo stroienija metallov, Moscow, Metallurgija, 1975, p. 137 (in Russian).
27. Wolff · Mater. Sci. Eng. · 1997 · A239–A240 · 21310.1016/S0921-5093(97)00584-4 ↗