Standard surface defects produced by water vapour oxidation in steels used in fossil fuel fired power plants
Source abstract
Abstract
Abstract The present work describes the population of surface defects produced by steam in steels typically used in superheater, reheater and water wall tubes of fossil fuel fired power stations at working temperatures. An accurate statistical description of material defects (in the as-manufactured condition and of those defects induced in service), and the service conditions (temperature, stress, time, ambient…) is necessary to assess correctly the life of a component on a sound, scientific bases and not only in an empirical way. Oxidation-induced defects were generated in the laboratory using Ar, saturated with water vapour for different times and at various temperatures, representative of those expected in service. The population of surface defects has been measured by conventional metallographic procedures. An evolution is observed, with time and temperature, of the mean size of surface defects in carbon steels but not in SA-213-T22 ferritic steel. The surface density of defects for carbon steel SA-210 decreases with time by growth and coalescence of neighbouring pits. For carbon steel SA-178-C, the oxidation takes place by lateral growth of the pits that meet, eventually spalling the metal. The defect densities in samples that operated under real conditions (true service 1, TS.1 and TS.2) are smaller than in the as-received material and laboratory-oxidised samples. A coalescence mechanism among neighbouring pits is also observed for these samples.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Fatigue and fracture mechanics · High-Temperature Coating Behaviors · High Temperature Alloys and Creep
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (14)
Show source-provided references
1. Martı́nez-Esnaola · Fatigue Fract. Eng. Mater. Struct. · 1997 · 20 · 77110.1111/j.1460-2695.1997.tb00307.x ↗
2. Miller · Anales de Mecánica de la Fractura · 1995 · 12 · 1
3. Miller · 1985 · 477
4. Navarro · Philos. Mag. · 1988 · 57 · 30
5. Sun · Fatigue Fract. Eng. Mater. Struct. · 1991 · 14 · 27710.1111/j.1460-2695.1991.tb00658.x ↗
6. Johnson · 1991 · B
7. Laz · Int. J. Fatigue · 1998 · 20 · 26310.1016/S0142-1123(97)00136-9 ↗
8. Heine · 1989
9. Martı́n-Meizoso · Theoret. Appl. Fracture Mech. · 1995 · 23 · 21910.1016/0167-8442(95)00024-9 ↗
10. F. Castro, C. Zubillaga, T. Gómez-Acebo, A. Arı́ztegui, Estudio de la formación y evolución de la capa de magnetita en el interior de tubos de sobrecalentador/recalentador de centrales térmicas, Proyecto Magnetus, CEIT (1997).
11. Arı́ztegui · Boletı́n de la Sociedad Española de Cerámica y Vidrio · 2000 · 39 · 30510.3989/cyv.2000.v39.i3.846 ↗
12. M. Fuentes, A. Martı́n-Meizoso, J.M. Martı́nez-Esnaola, I. Ocaña, R. Rodrı́guez, ‘Elaboración de una herramienta de evaluación y predicción de daño bajo distintos escenarios de operación’, Proyecto VITAL, Informe técnico 1221.T3, CEIT (1998).
13. M. Fuentes, A. Martı́n-Meizoso, J.M. Martı́nez, I. Ocaña, R. Rodrı́guez, ‘Elaboración de una herramienta de evaluación y predicción de daño bajo distintos escenarios de operación’, Proyecto VITAL, Informe técnico 1221.T4, CEIT (1998).
14. C.M. Sellars, Quantitative metallography, Course presented for ‘Curso Master en Metalurgia Fı́sica y Metalurgia Mecánica’, Escuela Superior de Ingenieros Industriales, University of Navarra, San Sebastián, Spain, 1981, revised 1986.