journal article·2003-03Open access

Extrusion of nanocomposite Al90Fe5Nd5 powders and characterization of the consolidated material

K.R Cardoso, A Garcı́a Escorial, M Lieblich, W.J Botta F

Materials Science and Engineering: A· Volume 344· Issue 1-2

Abstract

In this work, a new Al90Fe5Nd5nanocomposite atomized powder was extruded applying different processing parameters and the resulting bulk material was microstructurally and mechanically characterized. Successful extrusion was obtained for an extrusion ratio of 7:1 and extrusion temperatures of 370 and 450 °C. Yield strengths up to 726 MPa were obtained. A linear relationship between hardness and yield strength was found, which would lead to a yield strength as high as 900 MPa for the 25–50 μm powder extruded at 370 °C.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Quasicrystal Structures and Properties · Metallic Glasses and Amorphous Alloys · Microstructure and mechanical properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (10)

Show source-provided references
1. Inoue · Jpn. J. Appl. Phys. · 1988 · 27 · L47910.1143/JJAP.27.L479 ↗
2. Kim · Mater. Trans. JIM · 1990 · 31 · 74710.2320/matertrans1989.31.747 ↗
3. Ohtera · Mater. Trans. JIM · 1992 · 33 · 77510.2320/matertrans1989.33.775 ↗
4. Hong · Mater. Sci. Eng. · 1999 · A271 · 46910.1016/S0921-5093(99)00317-2 ↗
5. Kawamura · Scripta Mater. · 1993 · 29 · 27510.1016/0956-716X(93)90322-J ↗
6. Inoue · Mater. Sci. Forum · 2001 · 360 · 12910.4028/www.scientific.net/MSF.360-362.129 ↗
7. Cardoso · Mater. Sci. Eng. · 2001 · A315 · 8910.1016/S0921-5093(01)01197-2 ↗
8. P.J. Warren, Y. Zhang, F. Gómez-Cuevas, B.C. Ko, B. Cantor, In: E. Ma (Ed.), Proc. ISMANAM 2001. Mater. Sci. Forum, in press.
9. Schurack · Acta Mater. · 2001 · 49 · 135110.1016/S1359-6454(01)00045-3 ↗
10. Greer · 2001 · 461