journal article·2001-01

Uniform tensile elongation obtained from experiment and its estimation using dislocation dynamics parameters

T Hasegawa, K Okazaki

Materials Science and Engineering: A· Volume 297· Issue 1-2
Publisher page

Abstract

Abstract Uniform tensile elongation was estimated based on Hart's criterion of m+γ≥1 for plastic stability where m is the strain rate sensitivity and γ the strain hardening parameter. These m and γ are certainly stress- and strain-dependent in nature since they are defined as ( ∂ ln σ/∂ ln e ) and ( ∂ ln σ/∂e ), respectively, not unique material parameters even in a given deformation condition. In the present paper, they were descriptively correlated with the deformation parameters based on dislocation dynamics; their values could be obtained from computer simulation of the true stress–true strain curves. The uniform strains prior to the local necking were estimated from the simulated deformation parameters for a mechanically milled Al–1.1at%Mg–1.2at%Cu alloy deformed in tension at various constant true strain rates (1×10−3 to 5×100 s−1) and temperatures (523–823 K), and compared with those visually observed using a high speed camera. A reasonable agreement was found between the estimated and observed values, indicating the validity of the dislocation dynamics approach on the basis of a concept of plastic stability proposed by Hart for the estimation of uniform elongation.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Microstructure and mechanical properties · Metallurgy and Material Forming · Metal Forming Simulation Techniques

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (17)

Show source-provided references
1. Nieh · Scripta Metall. · 1985 · 19 · 137510.1016/0036-9748(85)90070-5 ↗
2. Bieler · Scripta Metall. · 1988 · 22 · 8110.1016/S0036-9748(88)80310-7 ↗
3. Higashi · 1993 · 35
4. Hasegawa · Acta Mater. · 1998 · 46 · 600110.1016/S1359-6454(98)00281-X ↗
5. Hasegawa · Mater. Sci. Eng. · 1999 · A260 · 29410.1016/S0921-5093(98)00961-7 ↗
6. Hasegawa · Mater. Sci. Eng. · 1999 · A265 · 24610.1016/S0921-5093(98)01147-2 ↗
7. Hasegawa · Mater. Sci. Eng. · 2000 · A277 · 28410.1016/S0921-5093(99)00538-9 ↗
8. Hart · Acta Metall. · 1967 · 15 · 35110.1016/0001-6160(67)90211-8 ↗
9. Bergström · Mater. Sci. Eng. · 1972 · 9 · 10110.1016/0025-5416(72)90022-5 ↗
10. Hasegawa · Acta Mater. · 2000 · 48 · 178910.1016/S1359-6454(00)00005-7 ↗
11. Yoshinaga · Trans. Jpn. Inst. Metal. · 1985 · 26 · 42310.2320/matertrans1960.26.423 ↗
12. Nichols · Acta Metall. · 1980 · 28 · 66310.1016/0001-6160(80)90144-3 ↗
13. Köster · Z. Metallkde. · 1948 · 39 · 1
14. Orowan · Proc. Phys. Soc. · 1940 · 52 · 810.1088/0959-5309/52/1/303 ↗
15. Johnston · J. Appl. Phys. · 1959 · 30 · 12910.1063/1.1735121 ↗
16. Vreeland · 1968 · 529
17. Seeger · 1963 · 665