journal article·2006-12

Melt infiltration of SiCp reinforced Al matrix composite by newly designed pressure infiltration technique

Nakornriab Nicom, Hiroyuki Nomura

Materials Science and Engineering: A· Volume 441· Issue 1-2
Publisher page

Abstract

Newly designed pressure infiltration technique was developed to clarify the molten metal flow through solid network, aiming to obtain property materials and, simultaneously, the purified matrix as a filtrated metal. An experimental apparatus was constructed to control the microstructure morphology for varied fraction of solid and applied pressure. A sample, Al-7 wt.% Si-20 vol.% SiCp was squeezed on the double layers of semi-solid aluminum alloy cake and alumina porous medium by using argon gas pressure. Permeability values were estimated by Darcy's law in order to know the molten metal flow characteristics through solid network in the semi-solid range. It was found that the permeability suddenly decreased with increasing fraction of solid, and filtration mechanism was changed between depth and cake filtration near fraction of solid 0.25 due to much difference of the flow resistance between the two. Increasing applied pressure decreased the permeability due to the consolidation of solid grains. For pressurized sample on the filter and filtrated metal, SiCp content became to as high as 38 and less than 0.4 in volume percentage depending on fraction of solid, respectively. The pressurized samples with high SiCp content showed low wear rate and high hardness, when compared with original composite sample.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Aluminum Alloys Composites Properties · Aluminum Alloy Microstructure Properties · Microstructure and mechanical properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (20)

Show source-provided references
1. Shorowordi · J. Mater. Proccess. Technol. · 2003 · 142 · 73810.1016/S0924-0136(03)00815-X ↗
2. Romero · Mater. Sci. Eng. · 1996 · 212A · 110.1016/0921-5093(96)10168-4 ↗
3. Fan · Comp. Part A · 2003 · 34 · 29110.1016/S1359-835X(03)00029-0 ↗
4. Garcia-Hinjosa · Mater. Sci. Eng. · 2004 · 386A · 5410.1016/j.msea.2004.07.020 ↗
5. Nicom · Mater. Trans. · 2005 · 46 · 189710.2320/matertrans.46.1897 ↗
6. Vieira · Acta Mater. · 2005 · 53 · 537910.1016/j.actamat.2005.08.014 ↗
7. Nishida · Metall. Mater. Trans. · 1999 · 30A · 839
8. Fogagnolo · J. Mater. Proccess. Technol. · 2003 · 143/144 · 79210.1016/S0924-0136(03)00380-7 ↗
9. de Nevers · 1991
10. Santos · Mater. Sci. Eng. · 2005 · 391A · 15110.1016/j.msea.2004.08.048 ↗
11. Rohatgi · Mater. Sci. Eng. · 2005 · 398A · 110.1016/j.msea.2005.03.035 ↗
12. 1981
13. van Boggelen · Scripta Mater. · 2003 · 49 · 71710.1016/S1359-6462(03)00358-0 ↗
14. Sheil · Metall. · 1942 · 34 · 70
15. Flemings · Metall. Trans. A · 1991 · 22 · 95710.1007/BF02661090 ↗
16. 2004
17. Basner · 2000
18. Ohmi · J. Jpn. Inst. Light Met. · 1994 · 44 · 50410.2464/jilm.44.504 ↗
19. Liaw · Acta Mater. · 1996 · 5 · 210110.1016/1359-6454(95)00324-X ↗
20. Ma · Mater. Sci. Eng. · 2003 · 360A · 11610.1016/S0921-5093(03)00408-8 ↗