journal article·2007-03

Microstructural comparison of Zr73.5Nb9Cu7Ni1Al9.5 nanostructure-dendrite composites produced by different casting techniques

K.B. Kim, J. Das, W. Löser, M.H. Lee, D.H. Kim, S.K. Roy, J. Eckert

Publisher page

Abstract

Abstract Zr 73.5 Nb 9 Cu 7 Ni 1 Al 9.5 (numbers indicate at.%) nanostructure-dendrite composites were fabricated using three different casting techniques: suction casting, centrifugal casting and arc-melting. The microstructure of the suction casting sample consists of micrometer-scale dendrites in a nanostructured matrix. However, some areas in the matrix contain nano-scale crystals together with an amorphous phase revealing an inhomogeneity of the specimen. On the contrary, the microstructures of the centrifugally-cast and the arc-melted samples are overall homogeneous, consisting of micrometer-scale dendrites that are homogeneously distributed in a nanostructured matrix. The dendrites correspond to a body centered cubic (bcc) β-Zr phase, whereas the nanostructured matrix consists of body centered tetragonal (bct) Zr 2 Cu-type and hexagonal close-packed (hcp) MgZn 2 -type phases. The comparison of the microstructures of these two alloys reveals that the formation of nano-scale twins and a disordered ω-phase in the β-Zr dendrites only happens in the centrifugally-cast sample. The differences in the phases and the microstructures between the differently prepared samples significantly influence the corresponding mechanical properties of the specimens.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Metallic Glasses and Amorphous Alloys · Quasicrystal Structures and Properties · Phase-change materials and chalcogenides

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (18)

Show source-provided references
1. He · Nature Mater. · 2003 · 2 · 3310.1038/nmat792 ↗
2. Das · Appl. Phys. Lett. · 2003 · 82 · 469010.1063/1.1587254 ↗
3. He · Acta Mater. · 2003 · 51 · 522310.1016/S1359-6454(03)00386-0 ↗
4. Dai · J. Mater. Res. · 2004 · 19 · 255710.1557/JMR.2004.0332 ↗
5. He · Acta Mater. · 2004 · 52 · 303510.1016/j.actamat.2004.03.006 ↗
6. Kim · Appl. Phys. Lett. · 2005 · 86 · 17190910.1063/1.1920424 ↗
7. Zhang · Z. Metallk. · 2005 · 96 · 67510.3139/146.101087 ↗
8. Kim · Phys. Status. Solidi. a · 2005 · 202 · 240510.1002/pssa.200520073 ↗
9. Kim · Appl. Phys. Lett. · 2005 · 86 · 20190910.1063/1.1929080 ↗
10. Louzguine · J. Alloys Compd. · 2004 · L1 · 384
11. Louzguine · J. Mater. Res. · 2004 · 19 · 360010.1557/JMR.2004.0462 ↗
12. Das · Appl. Phys. Lett. · 2005 · 87 · 16190710.1063/1.2105998 ↗
13. Das · Scripta Mater. · 2003 · 49 · 118910.1016/j.scriptamat.2003.08.015 ↗
14. Löser · Intermetallics · 2004 · 12 · 115410.1016/j.intermet.2004.04.017 ↗
15. K.B. Kim, J. Das, M.H. Lee, D.H. Kim, C. Müller, J. Eckert, Intermetallics, submitted for publication.
16. Chadwick · Prog. Mater. Sci. · 1664 · 12 · 97
17. Shao · Acta Mater. · 2000 · 48 · 367110.1016/S1359-6454(00)00168-3 ↗
18. Shao · Mater. Sci. Eng. A · 2002 · 329–331 · 91410.1016/S0921-5093(01)01576-3 ↗