Distortion and residual stresses in structures reinforced with titanium straps for improved damage tolerance
Source abstract
Abstract
Distortion and residual stresses induced during the manufacturing process of bonded crack retarders have been investigated. Titanium alloy straps were adhesively bonded to an aluminium alloy SENT specimen to promote fatigue crack growth retardation. The effect of three different strap dimensions was investigated. The spring-back of a component when released from the autoclave and the residual stresses are important factors to take into account when designing a selective reinforcement, as this may alter the local aerodynamic characteristics and reduce the crack bridging effect of the strap. The principal problem with residual stresses is that the tensile nature of the residual stresses in the primary aluminium structure has a negative impact on the crack initiation and crack propagation behaviour in the aluminium. The residual stresses were measured with neutron diffraction and the distortion of the specimens was measured with a contour measurement machine. The bonding process was simulated with a three-dimensional FE model. The residual stresses were found to be tensile close to the strap and slightly compressive on the un-bonded side. Both the distortion and the residual stresses increased with the thickness and the width of the strap. Very good agreement between the measured stresses and the measured distortion and the FE simulation was found.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced Welding Techniques Analysis · Fatigue and fracture mechanics · Aluminum Alloy Microstructure Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (23)
Show source-provided references
1. Willams · Acta Mater. · 2003 · 51 · 577510.1016/j.actamat.2003.08.023 ↗
2. Zhang · A.I.A.A.J. · 2005 · 43 · 1613
3. Baker · Composites · 1993 · 24 · 51110.1016/0010-4361(93)90021-Y ↗
4. Liljedahl · J. Adhes. Sci. Technol. · 2005 · 19 · 52510.1163/1568561054352513 ↗
5. Liljedahl · J. Adhes. · 2006 · 82 · 106110.1080/00218460600948495 ↗
6. Liljedahl · Int. J. Adhes. Adhes. · 2007 · 27 · 50510.1016/j.ijadhadh.2006.09.015 ↗
7. C.D.M. Liljedahl, J. Brouard, O. Zanellato, J. Lin, J. Tan, S. Gangulo, P.E. Irving, M.E. Fitzpatrick, X. Zhang, L. Edwards, DTAS, September 2007, Delft, Netherlands.
8. Ong · Int. J. Adhes. Adhes. · 1992 · 12 · 1910.1016/0143-7496(92)90004-F ↗
9. Djokic · Composites Part A · 2002 · 33 · 27710.1016/S1359-835X(01)00083-5 ↗
10. Sablekin · Compos. Struct. · 2007 · 79 · 5510.1016/j.compstruct.2005.11.028 ↗
11. Sabelkin · Eng. Fract. Mech. · 2006 · 73 · 155310.1016/j.engfracmech.2006.01.029 ↗
12. Cytec Engineering Material Incorporation, Fm94 Technical datasheet.
13. Yu · Int. J. Adhes. Adhes. · 2006 · 26 · 51110.1016/j.ijadhadh.2005.07.006 ↗
14. Cytec Engineering Material Incorporation, BR127 Technical datasheet.
15. Fiori · J. Alloy Compd. · 2004 · 382 · 3910.1016/j.jallcom.2004.05.071 ↗
16. Bragg · Proc. Camb. Philos. Soc. · 1914 · 17 · 43
17. Hughes · Neutron News · 2006 · 17 · 2810.1080/10448630600837549 ↗
18. Daymond · J. Appl. Phys. · 1997 · 82 · 155410.1063/1.365956 ↗
19. Kuxzynski · IBM J. Res. Dev. · 2001 · 6 · 78310.1147/rd.456.0783 ↗
20. Case · Polymer · 2005 · 46 · 1083110.1016/j.polymer.2005.09.053 ↗
21. Bair · Polym. Eng. Sci. · 1990 · 30 · 60910.1002/pen.760301008 ↗
22. ABAQUS Analyses User's Manual, ABAQUS Incorporation.
23. C.D.M. Liljedahl, M.E. Fitzpatrick, L. Edwards, Compos. Struct. (in press).