journal article·2001-01

Flow stability of binary Al–Li alloys

S.S Menon, H.J Rack

Materials Science and Engineering: A· Volume 297· Issue 1-2
Publisher page

Abstract

Abstract The constitutive stress–strain behavior of extruded Al–1 wt.% Li and Al–2 wt.% Li has been characterized in the temperature range 573–823 K between strain rates of 5×10−4 and 1 s−1. These results together with dynamic materials modeling (DMM) were utilized to establish strain rate–strain-temperature processing maps. Stable regions, defined on the basis of two mechanistic stability criteria, 0 δ log (m)/δ log ( e ) , and two thermodynamic criteria, s>1 and δ log (s)/δ log ( e ) , were found to be associated with dynamic recovery (DRC) at low temperatures and dynamic recrystallization (DRX) at higher temperatures. Unstable flow was observed at both low temperatures (573–623 K)/high strain rates (10−1 s−1) and at high temperatures (773–823 K)/low strain rates (10−3–5×10−4 s−1), these instabilities being associated, respectively, with macroscopic shear band formation and dynamic grain growth.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Metallurgy and Material Forming · Microstructure and mechanical properties · Aluminum Alloy Microstructure Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (28)

Show source-provided references
1. Sanders · 1980 · 63
2. Williams · 1980 · 89
3. Gregson · 1986 · 222
4. Venables · Scr. Met. · 1983 · 17 · 126310.1016/0036-9748(83)90296-X ↗
5. Gysler · 1980 · 189
6. McQueen · Met. Sci. · 1984 · 18 · 39510.1179/030634584790419854 ↗
7. Zaidi · Met. Sci. · 1983 · 17 · 21910.1179/030634583790420880 ↗
8. Prasad · Met. Trans. · 1984 · 15A · 188310.1007/BF02664902 ↗
9. H.L. Gegel, J.T. Morgan, J.C. Malas, Y. Prasad, Proceedings of the Seventh Annual Discontinuously Reinforced Aluminum Material Working Group Meeting, Park City, UT, MMCIAC No. 000656, Santa Barbara, 1985, p. 287.
10. Gegel · 1987 · 2 · 1243
11. Malas · Met. Trans. A · 1984 · 15 · 188310.1007/BF02664902 ↗
12. Long · Mater. Sci. Eng. · 1993 · A170 · 21510.1016/0921-5093(93)90382-O ↗
13. Long · Mater. Sci. Eng. · 1995 · A194 · 9910.1016/0921-5093(94)09665-1 ↗
14. Ravichandran · Met. Trans. A · 1991 · 22 · 233910.1007/BF02665000 ↗
15. S.S. Menon, M.S. thesis, Clemson University, Clemson, SC, 1994.
16. Makin · 1986 · 392
17. V. DePierre, A.T. Male, Technical Report AFML-TR-69-28, Part I, Air Force Materials Laboratory, Air Force Systems Command, Wright Patteron Air Force Base, OH, October 1969.
18. Male · J. Inst. Met. · 1964 · 93 · 38
19. Charpentier · Met. Trans. A · 1986 · 17 · 222710.1007/BF02645920 ↗
20. Antares Primer Manual, Version 4.0, UES Inc., 4401 Dayton-Xenia Road, Dayton, OH-45432-1894, 1994.
21. A.A. Gokhale, V. Singh, N.E. Prasad, C.R. Chakravorty, Y.V.R.K. Prasad, The Fourth International Conference on Aluminum Alloys, Their Physical and Mechanical Properties, vol. II, Atlanta, GA, September 11–16, 1994, p. 242.
22. Edington · Met. Trans. A · 1974 · 13 · 70310.1007/BF02642384 ↗
23. Srinivasan · Mater. Sci. Tech. · 1992 · 8 · 20610.1179/mst.1992.8.3.206 ↗
24. Ravichandran · Bull. Mater. Sci. · 1991 · 14 · 124110.1007/BF02744618 ↗
25. Friedel · 1964 · 163
26. Goldsmith · 1961 · 1
27. Derby · Scr. Met. · 1987 · 21 · 87910.1016/0036-9748(87)90341-3 ↗
28. C.M. Sung, H.M. Chan, D.B. Williams, in: C. Baker, P.J. Gregson, S.J. Harris, C.J. Peel (Eds.), Aluminum–Lithium Alloys III, in: Proceedings of the Third International Al–Li Conference, Institute of Metals, London, 1986, p. 547.