journal article·2006-12

A new low-temperature internal friction peak in NiTi based alloys

B. Coluzzi, A. Biscarini, G. Mazzolai, F.M. Mazzolai

Materials Science and Engineering: A· Volume 442· Issue 1-2
Publisher page

Abstract

Abstract The elastic, anelastic and calorimetric behavior of Ni-rich binary Ni 50.8 Ti 49.2 and quaternary Ni 47 Ti 40 Hf 10 Cu 3 alloys have been investigated in vacuum annealed and plastically deformed materials. A thermally activated internal friction peak has been detected at around 150 K (1 kHz frequency), which is a distinct feature from the ones previously recorded in the aged and hydrogen-loaded alloys. It has also been found that the ultrasonic attenuation peak reported in the literature for an equi-atomic NiTi alloy is of the same nature as the present one. The common relaxation parameters of these two effects are W = 0.29 ± 0.02 eV and τ 0 = (8 ± 2) × 10 −14 s, where W is the activation enthalpy and τ 0 is the limiting relaxation time. The suggested structural mechanisms for the relaxation are stress-assisted motions of vacancies interacting with twin boundaries (annealed state) and with bulk dislocations (plastically deformed state).
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Shape Memory Alloy Transformations · Intermetallics and Advanced Alloy Properties · Titanium Alloys Microstructure and Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (24)

Show source-provided references
1. J. Van Humbeeck, in: A. Riviere, V. Pelosin, P. Gadaud (Eds.), Proceedings of the ICIFUAS 11, J. Phys. (Paris) IV 6 (C8) (1996) 371–380.
2. Mazzolai · Recent Res. Dev. Mater. Sci. · 2003 · 4 · 191
3. Hasiguti · J. Appl. Phys. · 1968 · 39 · 218210.1063/1.1656523 ↗
4. Mercier · Acta Metall. · 1979 · 27 · 146710.1016/0001-6160(79)90169-X ↗
5. Bidaux · Acta Metall. · 1989 · 37 · 80310.1016/0001-6160(89)90007-2 ↗
6. Zhu · Phys. Stat. Sol. (a) · 1988 · 108 · 61310.1002/pssa.2211080216 ↗
7. Wu · Acta Metall. Mater. · 1990 · 38 · 9510.1016/0956-7151(90)90137-6 ↗
8. Zhu · 1990 · 361
9. Mari · J. Phys. (Paris) IV · 1995 · C8 · 659
10. Lin · J. Alloys Compd. · 2003 · 355 · 9010.1016/S0925-8388(03)00283-4 ↗
11. Yoshida · Sol. State Phenom. · 2003 · 89 · 31510.4028/www.scientific.net/SSP.89.315 ↗
12. Pelosin · Metall. Mater. Trans. · 1998 · 29A · 117510.1007/s11661-998-0244-5 ↗
13. Golyandin · J. Alloys Compd. · 2000 · 310 · 31210.1016/S0925-8388(00)01018-5 ↗
14. Biscarini · 1999 · 1040
15. Biscarini · Acta Mater. · 1999 · 47 · 196510.1016/S1359-6454(99)00031-2 ↗
16. Biscarini · Acta Mater. · 1999 · 47 · 452510.1016/S1359-6454(99)00337-7 ↗
17. Mazzolai · Acta Mater. · 2003 · 51 · 57310.1016/S1359-6454(02)00439-1 ↗
18. Biscarini · J. Alloys Compd. · 2003 · 355 · 5210.1016/S0925-8388(03)00267-6 ↗
19. Mazzolai · Appl. Phys. Lett. · 2004 · 85 · 275610.1063/1.1799247 ↗
20. Liang · Scr. Mater. · 2001 · 45 · 59110.1016/S1359-6462(01)01068-5 ↗
21. Ren · J. Phys. (Paris) IV · 2001 · 11 · 75
22. Coluzzi · Scr. Mater. · 2004 · 51 · 19910.1016/j.scriptamat.2004.04.021 ↗
23. Igata · J. Alloys Compd. · 2003 · 355 · 8510.1016/S0925-8388(03)00282-2 ↗
24. Nowick · 1972