journal article·2002-07

Effect of NiO scales on the creep behavior of Ni single crystals at 550°C

L. Gaillet, M. Viennot, P. Berger, G. Moulin

Materials Science and Engineering: A· Volume 332· Issue 1-2
Publisher page

Abstract

Abstract The creep properties of Ni(111) monocrystals are studied in oxygen at 550 °C: Ni samples were covered with a thermally grown NiO scale prior to the experiments. Three distinct mechanical studies were performed, global creep; local creep (periodic cracking technique) and stress relaxation. The global creep behavior of preoxidized nickel is divided into two stress domains associated with a diffusion creep mechanism (up to 35–40 MPa) and a power law creep (above 40 MPa). These results are confirmed by local creep analysis based on a periodic cracking process of the thin oxidized zone (‘periodic film cracking’ technique). Also modifications of deformation mechanism, between bare samples and samples covered with a NiO outer scale, are observed and associated with the properties of defects in the substrate near the oxide scale. Stress relaxation serves to identify the two effective stresses that must be taken into account: a stress which can be relaxed (Δ σ ) and a permanent internal stress ( σ i ). Δ σ is the effective stress for diffusion of mobile species in creep. Above mechanical loading of 40 MPa, stress relaxation suggests that, after complete oxide layer destruction, either a new continuous NiO scale develops, or the healing of cracks occurs.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advanced ceramic materials synthesis · Corrosion Behavior and Inhibition · Copper Interconnects and Reliability

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (21)

Show source-provided references
1. J.F. Stringer, High temperature Corrosion of Aerospace Alloys, NATO, Solid State AGARDograph, 200 (1975) 117.
2. A. Aubry, Ph.D. thesis, University of Technology of Compiègne, Compiègne, 1985.
3. Moulin · Oxidation Met. · 1996 · 45 · 15310.1007/BF01046824 ↗
4. Moulin · Oxidation Met. · 1993 · 40 · 8510.1007/BF00665260 ↗
5. Quinn · J. Electrochem. Soc. Solid State Sci. Technol. · 1983 · 130 · 2043
6. Agrawal · Acta Metall. · 1989 · 37 · 126510.1016/0001-6160(89)90120-X ↗
7. Jobin · Acta Metall. Mater. · 1992 · 40 · 226910.1016/0956-7151(92)90145-5 ↗
8. P. Duong, Ph.D. thesis, Pierre et Marie Curie University, Paris, 1977.
9. Delaunay · Corros. Sci. · 1980 · 20 · 110910.1016/0010-938X(80)90141-9 ↗
10. A. Germidis, E. Andrieu, F. Bernard, M. Lambertin, G. Moulin, Proceedings of the International Congress of Metallurgy and Materials Technology, IBERO MET III, Sao Paulo, Brazil, 1994.
11. Frost · 1982 · 53
12. N. Vallino, Ph.D. thesis, University of Technology of Compiegne, Compiegne, 2000.
13. J. Philibert, La diffusion dans les solides, Masson ed., Paris, 1972.
14. Atkinson · Rev. Mod. Phys. · 1985 · 57 · 43710.1103/RevModPhys.57.437 ↗
15. Siethoff · Acta Metall. · 1985 · 33 · 44310.1016/0001-6160(85)90086-0 ↗
16. Loesh · Acta Metall. · 1979 · 27 · 188510.1016/0001-6160(79)90079-8 ↗
17. Atkinson · J. Mater. Sci. · 1978 · 13 · 42710.1007/BF00647789 ↗
18. G. Moulin, F. Maurel, in: S. Denis, J.L. Lebrun, B. Bourniquel, M. Barral, J.F. Flavenot (Eds.), Proceedings of the Fourth European Conference on Residual Stresses (ECRS4), Cluny ENSAM (Pub.) 1996, p. 537.
19. Küppender · Oxidation Met. · 1994 · 42 · 10910.1007/BF01061927 ↗
20. G. Baur, P. Lehr, in: CNRS Internal Report, Vitry, France, Contribution à l’étude de la déformation plastique du titane pur, 1980.10.1016/0022-5088(80)90055-7 ↗
21. Ashby · Acta Metall. · 1972 · 20 · 88710.1016/0001-6160(72)90082-X ↗