Effects of different BN grades on the machinability of Si3N4–MoSi2–BN composites
Source abstract
Abstract
The effects of the addition of 20 vol% hexagonal boron nitride (h-BN) on the surface finishing and machinability of a Si3N4-5 vol% MoSi2 hot-pressed matrix were studied using three commercial BN powders with different particle sizes and impurity contents. After preparation of the specimens, the surface finishing of the BN-containing composites was much lower than the starting matrix. The materials' machinability was quantitatively assessed by turning and drilling tests. In the severe turning tests, the wear resistance of the BN-containing composites was three times lower than the starting matrix without any BN size effect. In the mild drilling tests, the resistance of the composites was influenced by the BN grade, but without any obvious relationship to the BN pockets size. The impurities content of the starting BN powder could be the main factor affecting the machinability of the composites
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced ceramic materials synthesis · Metal and Thin Film Mechanics · Advanced materials and composites
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (19)
Show source-provided references
1. Gogotsi · J. Mater. Sci. · 1994 · 29 · 254110.1007/BF00356803 ↗
2. Martin · Mater. Sci. Eng. A · 1989 · 109 · 35110.1016/0921-5093(89)90614-X ↗
3. Natesan · Intermetallics · 2000 · 8 · 114710.1016/S0966-9795(00)00060-1 ↗
4. Klemm · J. Am. Ceram. Soc. · 1996 · 79 · 242910.1111/j.1151-2916.1996.tb08993.x ↗
5. V. Medri, S. Guicciardi, V. Dupont, C. Melandri, A. Bellosi, Adv. Eng. Mater., in press.
6. Kusunose · J. Am. Ceram. Soc. · 2002 · 85 · 268910.1111/j.1151-2916.2002.tb00515.x ↗
7. Ruigang · Mater. Sci. Eng. B · 2002 · 90 · 26110.1016/S0921-5107(01)01048-0 ↗
8. Carrapichano · Wear · 2002 · 253 · 107010.1016/S0043-1648(02)00219-3 ↗
9. Ruigang · Mater. Res. Bull. · 2002 · 37 · 126910.1016/S0025-5408(02)00773-0 ↗
10. W.S. Cho, Y.H. Lee, M.W. Cho, E.S. Lee, J.H. Lee, Y.C. Hong, D.S. Park, in: H. Mandaland, L. Öveçoĝlu (Eds.), Euro Ceramics, VIII, Key Eng. Mater., vols. 264–268, Trans Tech Publications Ltd., Zurich, Switzerland, 2004, pp. 873–876.10.4028/www.scientific.net/KEM.264-268.873 ↗
11. M.W. Cho, D.W. Kim, E.S. Lee, W.S. Cho, E.S. Lee, J. Lee, D.S. Park, T. Seo, in: H. Mandaland, L. Öveçoĝlu, (Eds.), Euro Ceramics, VIII, Key Eng. Mater., vols. 264–268, Trans Tech Publications Ltd., Zurich, Switzerland, 2004, pp. 869–872.10.4028/www.scientific.net/KEM.264-268.869 ↗
12. Li · Mater. Res. Bull. · 2002 · 37 · 140110.1016/S0025-5408(02)00786-9 ↗
13. Wang · J. Am. Ceram. Soc. · 2004 · 87 · 56510.1111/j.1551-2916.2004.00565.x ↗
14. Quinn · 2003 · 51110.1002/9780470294826.ch74 ↗
15. Medri · Adv. Eng. Mater. · 2006 · 8 · 27510.1002/adem.200500228 ↗
16. Munz · Int. J. Fract. · 1980 · 16 · R13710.1007/BF00013393 ↗
17. European Standard prEN 843-1, Advanced Technical Ceramics – Monolithic Ceramics, Mechanical Properties at Room Temperature – Part 1: Determination of Flexural Strength, 2004.
18. Ciftci · Wear · 2004 · 257 · 104110.1016/j.wear.2004.07.005 ↗
19. Evans · 1981 · 439