journal article·2003-07

A finite element analysis of strain induced transformation rolling and an experimental study on the grain refinement potential of severe undercooling thermo-mechanical treatment

C.J Huang, D.Z Li, Y.Y Li

Materials Science and Engineering: A· Volume 352· Issue 1-2
Publisher page

Abstract

A finite element analysis was performed to study the strain induced transformation rolling process through which ultra-fine-grain steels were produced. Within the surface layer of the specimen, where ultra-fined grains were found, high strain and severe undercooling were found to coexist during hot deformation. It is proposed in this paper that the ultra-refinement was caused by the deformation of austenite in a severely undercooled state. To verify the grain refinement potential of severe undercooling thermomechanical treatment, hot compression experiments were done on a Gleeble1500 thermo-mechanical simulator. Severe undercooling was obtained by cooling the specimens at very high cooling rate before deformation. Metallographic observations showed that ultrafine grains could be obtained at a true strain of 0.9 provided that undercooling was higher than 200 K. (C) 2002 Published by Elsevier Science B.V.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Microstructure and Mechanical Properties of Steels · Metal Alloys Wear and Properties · Metallurgy and Material Forming

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (25)

Show source-provided references
1. Hodgson · Mater. Sci. Forum · 1998 · 284–286 · 6310.4028/www.scientific.net/MSF.284-286.63 ↗
2. Priestner · Mater. Sci. Tech. · 1992 · 8 · 84910.1179/mst.1992.8.10.849 ↗
3. Hodgson · Scr. Mater. · 1999 · 40 · 117910.1016/S1359-6462(98)00411-4 ↗
4. Hurley · Scr. Mater. · 1999 · 40 · 43310.1016/S1359-6462(98)00442-4 ↗
5. Mabuchi · ISIJ Int. · 1999 · 39 · 47710.2355/isijinternational.39.477 ↗
6. Mark Hickson · Scr. Mater. · 1999 · 40 · 1176
7. Hurley · Mater. Sci. Tech. · 2000 · 16 · 127310.1179/026708300101507505 ↗
8. Hurley · Mater. Sci. Tech. · 2000 · 16 · 137610.1179/026708300101507299 ↗
9. Hurley · Mater. Sci. Eng. · 2001 · A302 · 20610.1016/S0921-5093(00)01823-2 ↗
10. Hurley · Metall. Mater. Trans. A · 2001 · 32A · 150710.1007/s11661-001-0238-z ↗
11. Zhang · J. Mater. Proc. Tech. · 1996 · 60 · 61510.1016/0924-0136(96)02395-3 ↗
12. Matsumura · ISIJ Int. · 1987 · 27 · 49210.2355/isijinternational1966.27.492 ↗
13. Minz · Int. Mater. Rev. · 1991 · 36 · 18710.1179/imr.1991.36.1.187 ↗
14. Gholinia · Mater. Sci. Tech. · 2000 · 16 · 125110.1179/026708300101507316 ↗
15. Howe · Mater. Sci. Tech. · 2000 · 16 · 126410.1179/026708300101507488 ↗
16. Priestner · Mater. Sci. Tech. · 2000 · 16 · 126710.1179/026708300101507497 ↗
17. Minz · Mater. Sci. Tech. · 2000 · 16 · 128210.1179/026708300101507109 ↗
18. Lee · Metall. Mater. Trans. A. · 1995 · 26A · 109310.1007/BF02670605 ↗
19. Minz · Mater. Sci. Tech. · 1997 · 13 · 37910.1179/mst.1997.13.5.379 ↗
20. Beynon · Mater. Forum · 1992 · 16 · 37
21. Thomson · ISIJ Int. · 2000 · 41 · 89110.2355/isijinternational.41.891 ↗
22. Inoue · Mater. Sci. Tech. · 2002 · 18 · 100710.1179/026708302225005855 ↗
23. Ouchi · ISIJ Int. · 2001 · 41 · 54210.2355/isijinternational.41.542 ↗
24. Leeuwen · ISIJ Int. · 2001 · 41 · 103710.2355/isijinternational.41.1037 ↗
25. Adachi · ISIJ Int. · 2000 · 40 · S19410.2355/isijinternational.40.Suppl_S194 ↗