On the role of matrix creep in the high temperature deformation of short fiber reinforced aluminum alloys
Source abstract
Abstract
The present study investigates creep of short fiber reinforced metal matrix composites (MMCs) which were produced by squeeze casting. Two types of aluminum alloys were used as matrix materials with class I (alloy type) and class II (metal type) creep behavior. The creep behavior of the resulting MMCs is similar both in terms of the shape of the individual creep curves as well as with respect to the stress dependence of the minimum creep rates. Their creep behavior can be rationalized on the basis of a coupling of elementary deformation processes. There is a stress transfer to the fibers by the formation of a work hardened zone. A recovery process in which dislocations move along the fiber to the fiber ends where they shrink and annihilate counteracts this strain hardening process. Once fibers and/or subfibers reach critical stresses they break; this results in multiple fiber breakage. It is the coupling of these elementary processes which governs creep of short fiber reinforced aluminum alloys. This microstructural creep scenario controls creep of short fiber reinforced aluminum alloys irrespective of whether the isolated matrix material shows class I or II creep behavior. The results of this study also show that fiber reinforcing results in a significant increase of creep strength. In this respect the matrix material is important because the creep strengths of the MMCs scale with the creep resistance of the matrix materials.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Aluminum Alloys Composites Properties · Microstructure and mechanical properties · Aluminum Alloy Microstructure Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (17)
Show source-provided references
1. Cadek · 1988
2. Cadek · Mat. Sci. Eng. · 1995 · A190 · 910.1016/0921-5093(94)09605-V ↗
3. Li · Met. Mat. Trans. · 1998 · 29A · 252310.1007/s11661-998-0224-9 ↗
4. Dlouhy · Acta Met. Mat. · 1995 · 43 · 53510.1016/0956-7151(94)00255-G ↗
5. Ashby · Phil. Mag. · 1970 · 21 · 39910.1080/14786437008238426 ↗
6. Eggeler · Z. Metallkde. · 1994 · 85 · 39
7. Pract
8. Dlouhy · 1999
9. Phillips · Mat. Sci. Eng. · 1997 · A234-236 · 40110.1016/S0921-5093(97)00199-8 ↗
10. Mechanisms Controlling Creep of Single Phase Metals and Alloys
11. W. Blum, High-Temperature Deformation and Creep of Crystalline Solids, in: H. Mughrabi, V.C.H. Weinheim, Plastic Deformation and Fracture of Materials, In: Materials Science and Technology, vol. 6, 1993, pp. 360–403
12. Dlouhy · Pract. Met. · 1993 · 30 · 17210.1515/pm-1993-300403 ↗
13. Dlouhy · Acta Metall. Mater. · 1993 · 41 · 324510.1016/0956-7151(93)90054-V ↗
14. Skrotzki · Z. Metallkde. · 1999 · 90 · 393
15. Li · Met. Trans. A · 1997 · 28 · 127110.1007/s11661-997-0293-1 ↗
16. Microstructural Threshold Events Coupled with Internal Stress Evolution: Controlling Creep Mechanisms in Advanced Materials
17. Creep Properties of Metal Matrix Composites