journal article·2005-06

Strain evolution after fiber failure in a single-fiber metal matrix composite under cyclic loading

Jay C. Hanan, Sivasambu Mahesh, Ersan Üstündag, Irene J. Beyerlein, Geoffrey A. Swift, Bjørn Clausen, Donald W. Brown, Mark A.M. Bourke

Materials Science and Engineering: A· Volume 399· Issue 1-2
Publisher page

Abstract

The evolution of in situ elastic strain with cyclic tensile loading in each phase of a single Al 2O3-fiber/aluminum-matrix composite was studied using neutron diffraction (ND). An analytical model appropriate for metal matrix composites (MMCs) was developed to connect the measured axial strain evolution in each phase with the possible micromechanical events that could occur during loading at room temperature: fiber fracture, interfacial slipping, and matrix plastic deformation. Model interpretation showed that the elastic strain evolution in the fiber and matrix was governed by fiber fracture and interface slipping and not by plastic deformation of the matrix, whereas the macroscopic stress–strain response of the composite was influenced by all three. The combined single-fiber composite model and ND experiment introduces a new and quick engineering approach for qualifying the micromechanical response in MMCs due to cyclic loading and fiber fracture. 12 13 14 15 16 17 18 19
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Aluminum Alloys Composites Properties · Advanced ceramic materials synthesis · Microstructure and mechanical properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (25)

Show source-provided references
1. He · J. Mech. Phys. Solids · 1999 · 47 · 46510.1016/S0022-5096(98)00053-2 ↗
2. Zhou · Acta Mater. · 2002 · 50 · 36510.1016/S1359-6454(01)00353-6 ↗
3. Beyerlein · Sci. Eng. Compos. Mater. · 1998 · 7 · 15110.1515/SECM.1998.7.1-2.151 ↗
4. Hanan · Mater. Sci. Forum · 2002 · 404–407 · 90710.4028/www.scientific.net/MSF.404-407.907 ↗
5. Hanan · Metall. Mater. Trans. A · 2002 · 33A · 383910.1007/s11661-002-0256-5 ↗
6. Hanan · Acta Mater. · 2003 · 51 · 423910.1016/S1359-6454(03)00240-4 ↗
7. Schadler · Int. Mater. Rev. · 1995 · 40 · 11610.1179/imr.1995.40.3.116 ↗
8. Ma · Acta Metall. Mater. · 1995 · 40 · 213710.1016/0956-7151(94)00445-5 ↗
9. Hui · J. Mech. Phys. Solids · 1995 · 43 · 155110.1016/0022-5096(95)00045-K ↗
10. Gao · Theor. Appl. Fracture Mech. · 1997 · 28 · 2910.1016/S0167-8442(97)00028-1 ↗
11. Zhang · Compos. Sci. Technol. · 2002 · 62 · 64110.1016/S0266-3538(02)00022-2 ↗
12. Callister · 1994
13. ASTM: E112-88, Standard Test Methods for Determining Grain Sizes, pp. 297–322.
14. Bourke MAM · Appl. Phys. A · 2002 · 74 · S170710.1007/s003390201747 ↗
15. Rietveld · J. Appl. Cryst. · 1969 · 2 · 6510.1107/S0021889869006558 ↗
16. A.C. Larson, R.B. von Dreele, GSAS-General Structure Analysis System, LAUR, Los Alamos National Laboratory, 1986, pp. 86–748.
17. Noyan · 1987
18. Tanaka · JSME Int. J. · 1998 · 41 · 28010.1299/jsmea.41.280 ↗
19. Chen · Proc. R. Soc. Lond. A · 1995 · 450 · 53710.1098/rspa.1995.0099 ↗
20. Fukui · Metall. Mater. Trans. A · 1996 · 27A · 414510.1007/BF02595662 ↗
21. W.S. Johnson, J.M. Larsen, B.N. Cox, Life prediction methodology for Ti matrix composites, ASTM STP 1253, American Society for Testing and Materials, W. Conshohocken, PA.
22. Teng · J. Appl. Mech. · 1992 · 59 · 54710.1115/1.2893758 ↗
23. Liu · Philos. Mag. A. · 1994 · 70 · 35910.1080/01418619408243190 ↗
24. Kelly · Proc. R. Soc. Lond. A · 1970 · 319 · 9510.1098/rspa.1970.0168 ↗
25. Lu · J. Mater. Sci. Lett. · 2000 · 19 · 134310.1023/A:1006792813890 ↗