journal article·2006-07

Effect of lubrication on deformation characteristics of a superplastic 5083 Al alloy during bi-axial deformation

Horng-Yu Wu, Chui-Hung Chiu, Jiann-Yih Wang, Shyong Lee

Materials Science and Engineering: A· Volume 427· Issue 1-2
Publisher page

Abstract

Abstract Effect of lubrication on deformation behavior of a superplastic material has relatively been less examined, though it is important for industrial application. In this paper, a superplastic 5083 Al alloy under bi-axial deformation was investigated by deforming the sheet into a rectangular die cavity with and without lubrication. It was found that reducing the interfacial friction by use of a lubricant altered the metal flow after the deformed sheet had made contact with the die surface. Changes of the metal flow during forming not only developed a better thickness distribution of the formed part, but also improved cavitation distribution. The cavitation levels could be effectively reduced for forming with lubrication at a higher strain rate; the maximum cavity volume fraction decreased from 6.75 to 3.33% for forming at a strain rate of 1 × 10−3 s−1.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Microstructure and mechanical properties · Metallurgy and Material Forming · Metal Forming Simulation Techniques

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (26)

Show source-provided references
1. Bampton · 1985 · 1
2. Chokshi · Mater. Sci. Eng. A · 2005 · 410–411 · 9510.1016/j.msea.2005.08.069 ↗
3. Nicolaou · Acta Mater. · 2003 · 51 · 61310.1016/S1359-6454(02)00441-X ↗
4. Gouthama · Scripta Mater. · 2003 · 49 · 76110.1016/S1359-6462(03)00427-5 ↗
5. Ragab · Mater. Sci. Technol. · 2005 · 21 · 39910.1179/174328405X36584 ↗
6. Raj · Acta Metall. · 1975 · 23 · 65310.1016/0001-6160(75)90047-4 ↗
7. Wu · J. Mater. Process. Technol. · 2000 · 101 · 7610.1016/S0924-0136(00)00427-1 ↗
8. Stowell · Acta Metall. · 1984 · 32 · 3510.1016/0001-6160(84)90199-8 ↗
9. Cocks · Met. Sci. · 1982 · 16 · 46510.1016/0036-9748(82)90413-6 ↗
10. Chen · Acta Metall. · 1981 · 29 · 175910.1016/0001-6160(81)90009-2 ↗
11. Zelin · Metall. Trans. A · 1993 · 24A · 41710.1007/BF02657329 ↗
12. Bampton · Metall. Trans. A · 1983 · 14A · 158310.1007/BF02654385 ↗
13. Verma · J. Mater. Eng. Perform. · 1995 · 4 · 54310.1007/BF02649585 ↗
14. Ghosh · 1997 · 89
15. Pilling · 1988 · 183
16. Stowell · Met. Sci. · 1983 · 17 · 9210.1179/030634583790427586 ↗
17. Pilling · Acta Metall. · 1986 · 34 · 66910.1016/0001-6160(86)90182-3 ↗
18. Pilling · 1989
19. Hales · 1990 · 167
20. Zelin · 1997 · 137
21. Chockalingam · J. Mater. Sci. · 1985 · 20 · 131010.1007/BF01026327 ↗
22. Song · Mater. Sci. Eng. · 1986 · 84 · 11110.1016/0025-5416(86)90228-4 ↗
23. CEMEF, SUPFORM2, User's guide, Version 1.0, Fcole des Mines de Paris,1989.
24. Optimas Corporation, Optimas 5 Software, 6th ed., Seattle, Washington, 1995.
25. Wu · Mater. Sci. Eng. A · 2000 · 291 · 110.1016/S0921-5093(00)00986-2 ↗
26. Varloteaux · Mater. Sci. Technol. · 1989 · 5 · 110910.1179/mst.1989.5.11.1109 ↗