Synthesis and compressive deformation of rapidly solidified magnesium alloy and composites reinforced by SiCp
Source abstract
Abstract
In this paper, rapidly solidified magnesium-aluminum (AZ91HP) alloy and magnesium alloy matrix composites reinforced by SiCp were prepared successfully by the method of rapid solidification. Microstructure of rapidly solidified AZ91HP alloy was greatly refined through the process of rapid solidification compared with as-cast AZ91HP alloy. With increasing SiC content, 0.2% YS and ultimate compressive strength of composites had been improved significantly compared with the unreinforced counterparts, accompanied by a reduction of total strain. In quasi-static compressive tests, failure in form of decohesion at the particulate-matrix interface was observed numerously as a dominant failure mode of composites. Failure of the large-sized SiCp and particulate clusters occurred widely because of the higher strain-rate and the greater load transfer from the ductile matrix to the brittle particulates in dynamic deformation. (C) 2007 Elsevier B.V. All rights reserved.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Aluminum Alloys Composites Properties · Magnesium Alloys: Properties and Applications · Aluminum Alloy Microstructure Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (25)
Show source-provided references
1. Divecha · J. Met. · 1981 · 33 · 12
2. Nair · Int. Met. Rev. · 1985 · 30 · 27510.1179/imr.1985.30.1.275 ↗
3. Ramulu · J. Mater. Sci. · 1989 · 24 · 110310.1007/BF01148805 ↗
4. Wunq · Int. J. Plast. · 1985 · 1 · 12510.1016/0749-6419(85)90024-5 ↗
5. Cai · Mater. Sci. Eng. A · 2000 · 282 · 23210.1016/S0921-5093(99)00707-8 ↗
6. Hu · Scripta Mater. · 1998 · 39 · 101510.1016/S1359-6462(98)00281-4 ↗
7. Chua · Compos. Struct. · 1999 · 47 · 59510.1016/S0263-8223(00)00031-3 ↗
8. Mayencourt · Mater. Sci. Eng. A · 2002 · 325 · 28410.1016/S0921-5093(01)01454-X ↗
9. Yoshida · Adv. Compos. Mater. · 1999 · 8 · 25910.1163/156855199X00254 ↗
10. Chang · Mater. Trans. JIM · 1997 · 38 · 1810.2320/matertrans1989.38.18 ↗
11. Hunt · 1994 · 663
12. Allison · 1993 · 269
13. Nieh · Compos. Mater. Sci. Eng. A · 1991 · 15 · 12910.1016/0921-5093(91)90839-F ↗
14. Guden · Comput. Struct. · 2000 · 76 · 13910.1016/S0045-7949(99)00158-3 ↗
15. Cady · Metall. Mater. Trans. A · 2000 · 31 · 243910.1007/s11661-000-0189-9 ↗
16. Bae · J. Alloys Compd. · 2002 · 342 · 44510.1016/S0925-8388(02)00273-6 ↗
17. Sanchez · Sci. Eng. A · 1996 · 221 · 4810.1016/S0921-5093(96)10469-X ↗
18. Lim · Mater. Res. Bull. · 2001 · 36 · 262710.1016/S0025-5408(01)00750-4 ↗
19. Lu · Compos. Struct. · 2004 · 66 · 4110.1016/j.compstruct.2004.04.019 ↗
20. S.K. Das, C.F. Chang, US Patent No. 4,853,035 (22 August 1989).
21. G. Regazzoni, US Patent No. 4,997,622 (5 March 1991).
22. El-Saeid Essa · Compos. Part B · 2003 · 34 · 55110.1016/S1359-8368(03)00046-5 ↗
23. Ansell · 1970 · 1083
24. Murr · 1975
25. Chatterjee · J. Met. Sci. · 1975 · 10 · 109310.1007/BF00541390 ↗