Fluxless bonding process in air using Sn–Bi–Au design
Source abstract
Abstract
Abstract A new fluxless bonding technique using Sn–Bi–Au design is presented. Microstructure and phase growth mechanism of as deposited Au/Sn/Bi films were first studied by scanning electron microscopy (SEM), X-ray diffraction method (XRD) and X-ray photoelectron spectroscopy (XPS). It is found that the crystallites of Au–Sn intermetallics are randomly distributed in Bi-rich matrix that forms a top-capping layer. The average size of AuSn 2 and AuSn 4 crystallite are 756 and 667 A, respectively. The bonding process was performed at 250 °C in air without the use of flux. The resulting joints exhibit high shear strength of 4.9 kg and show only a few voids. Melting temperature of 225 °C was measured. The joint is composed of near eutectic Sn–Bi alloy with ribbon shaped AuSn 2 +AuSn 4 intermetallic compound layer embedded inside the solder joint. The fracture of the Sn–Bi–Au solder joint mainly occurs along the interface between the Au–Sn intermetallic layer and the Sn-rich regions. This facture mode is ductile. The flux-free process is compatible with many pick-and-place machines that operate in ambient air.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Electronic Packaging and Soldering Technologies · Metallurgical and Alloy Processes · Intermetallics and Advanced Alloy Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (14)
Show source-provided references
1. F. Hua, Z. Mei, J. Glazer, Eutectic Sn–Bi as an Alternative to Pb-free Solders, in: Proceedings of the Electronic Computers and Technology Conference, 48 ed., 1998, pp. 277–283.10.1109/ECTC.1998.678706 ↗
2. Interfacial embrittlement by bismuth segregation in copper/tin–bismuth Pb-free solder interconnect10.1557/JMR.2001.0229 ↗
3. R.R. Tummala, E.J. Rymaszewski, A.G. Klopfenstein, Microelectronics Packaging Handbook, second ed., Chapman and Hill, 1997, p. III-411.10.1007/978-1-4615-6041-8 ↗
4. A new bonding technology using gold and tin multilayer composite structures10.1109/33.87322 ↗
5. S. Choe, R. Chuang, C.C. Lee, Fluxless Sn–Bi–Au bonding process using multilayer design, in: Proceedings of the IEEE Electronic Computers and Technology Conference (ECTC), Lake Buena Vista, FL, 29 May–1 June 2001, pp. 486–488.10.1109/ECTC.2001.927771 ↗
6. R.W. Chuang, D.W. Kim, C.C. Lee, A fluxless Au–Sn bonding process of tin-rich compositions achieved in air ambient, in: Proceedings of the IEEE Electronic Computers and Technology Conference (ECTC), San Diego, CA, 28–31 May 2002, pp. 134–137.10.1109/ECTC.2002.1008086 ↗
7. X-ray photoelectron spectroscopic study on α- and γ-bismuth molybdate surfaces exposed to hydrogen10.1016/S0926-860X(01)00918-8 ↗
8. Auger and X-ray photoelectron spectroscopy study of the density of oxygen states in bismuth, aluminum, silicon and uranium oxides10.1016/S0368-2048(98)00405-8 ↗
9. Study of the oxidation of gold tin performs using X-ray photoelectron spectroscopy10.1063/1.359715 ↗
10. H. Okamoto, T.B. Massalski (Eds.), Binary Alloy Phase Diagrams, vol. 1, ASM International, Metals Park, OH, 1990, p. 434.
11. H.P. Klug, L.E. Alexander, X-Ray Diffraction Procedures, Wiley, 1954, p. 491.
12. H. Okamoto, T.B. Massalski (Eds.), Phase Diagrams of Binary Gold Alloys, ASM International, Metals Park, OH, 1987, pp. 278–289.
13. Die Shear Strength Test, Test method 2019.5, Military Standard 883E, 1996.
14. M. Grasserbauer, H.W. Werner, Analysis of Microelectronic Materials and Devices, Wiley, 1991, p. 267.