journal article·2005-05

The optimum composition of Me–C:H coatings on drills for cutting performance

W.H. Kao, Y.L. Su, S.H. Yao, J.M. Luan

Materials Science and Engineering: A· Volume 398· Issue 1-2
Publisher page

Abstract

Abstract This study investigates the drilling of AISI 1045 steel workpieces using Ti-based (Ti–C:H, Ti–C:H/TiC/TiCN/TiN and TiC/TiCN/TiN) and Cr-based (Cr–C:H/CrC/CrCN/CrN, Cr–C:H and CrC/CrCN/CrN) Me–C:H coated high-speed steel drills. The thrust forces, torque, flank wear and hole surface roughness are measured in order to evaluate the cutting performance of each coated drill. The coating comprising a Ti–C:H top layer deposited over an intermediate layer of TiC/TiCN/TiN results in a low and stable cutting force (thrust force and torque) throughout the drilling tests. This coated drill also demonstrates the highest drill wear resistance and produces a superior machined surface finish. The excellent cutting performance of this particular drill is due to the fact that the multi-layer composition generates an excellent solid lubricant effect, which improves the tribological interaction between the drill and the workpiece, hence resulting in a significant reduction in material transfer at the drill edge. Drills coated with a single thick Ti–C:H topcoat or with a single thick TiC/TiCN/TiN intermediate layer demonstrate poor cutting characteristics, including high flank wear, high thrust force, high torque and poor drilled hole quality. In general, the Cr-based coated drills exhibit a relatively poorer cutting performance and an inferior drilled hole quality than the Ti-based coated drills since the Cr element in the coating possesses a high chemical affinity for Fe.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Metal and Thin Film Mechanics · Diamond and Carbon-based Materials Research · Advanced materials and composites

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (21)

Show source-provided references
1. Shizhi · Surf. Coat. Technol. · 1990 · 43–44 · 100710.1016/0257-8972(90)90039-F ↗
2. Tosun · Compos. Sci. Technol. · 2004 · 64 · 29910.1016/S0266-3538(03)00290-2 ↗
3. Navinšek · Mater.Manuf. Processes · 1992 · 7 · 36310.1080/10426919208947426 ↗
4. Smith · Surf. Coat. Technol. · 1997 · 90 · 16410.1016/S0257-8972(96)03113-1 ↗
5. Chen · J. Mater. Process. Technol. · 2003 · 140 · 26910.1016/S0924-0136(03)00792-1 ↗
6. Hanyu · Thin Solid Films · 2002 · 413 · 13910.1016/S0040-6090(02)00284-5 ↗
7. Nesladek · Thin Solid Films · 1995 · 270 · 18410.1016/0040-6090(95)06914-3 ↗
8. Meming · Thin Solid Films · 1986 · 143 · 3110.1016/0040-6090(86)90144-6 ↗
9. Erdemir · Surf. Coat. Technol. · 1991 · 50 · 1710.1016/0257-8972(91)90187-2 ↗
10. Liu · Surf. Coat. Technol. · 1996 · 82 · 4810.1016/0257-8972(95)02623-1 ↗
11. Ronkainen · Surf. Coat. Technol. · 1996 · 79 · 8710.1016/0257-8972(95)02433-6 ↗
12. Harris · Wear · 1997 · 211 · 20810.1016/S0043-1648(97)00107-5 ↗
13. Deng · Diamond Relat. Mater. · 1995 · 4 · 93610.1016/0925-9635(94)00256-8 ↗
14. Monaghan · Surf. Coat. Technol. · 1993 · 60 · 52510.1016/0257-8972(93)90146-F ↗
15. Wang · J. Mater. Res. · 1992 · 7 · 66710.1557/JMR.1992.0667 ↗
16. Bewilogua · Surf. Coat. Technol. · 1993 · 61 · 14410.1016/0257-8972(93)90217-C ↗
17. Matthews · Diamond Relat. Mater. · 1994 · 3 · 90210.1016/0925-9635(94)90297-6 ↗
18. Sauo · Surf. Coat. Technol. · 1990 · 43–44 · 30
19. Dai · Diamond Relat. Mater. · 2000 · 9 · 175310.1016/S0925-9635(00)00296-X ↗
20. Vandevelde · Surf. Coat. Technol. · 1999 · 113 · 8010.1016/S0257-8972(98)00831-7 ↗
21. Fukui · Surf. Coat. Technol. · 2004 · 187 · 7010.1016/j.surfcoat.2004.01.014 ↗