Processing defects in hot extrusion reaction synthesis
Source abstract
Abstract
Abstract Experiments were conducted on a miniature and a larger extrusion press to simultaneously form and extrude nickel aluminides (Ni3Al, NiAl) and nickel aluminide composites from elemental powders using a novel process called hot extrusion reaction synthesis. An overview of macroscopic and microscopic processing defects that can arise in this process is presented as well as strategies for overcoming these defects. Extrusion cracking was found to significantly increase with increased nickel content. Higher extrusion die exit temperatures promoted both a reaction converting elemental powders to the desired intermetallic or intermetallic composites and reduced cracking of NiAl extrusions. Processing defects in the form of matrix micro-cracking and reaction layers between intermetallic matrix and SiC reinforcements were also present in the composite material. The reaction always occurs seconds after the material had been extruded, thus bypassing the consolidation stage of extrusion resulting in the presence of reaction induced porosity. A novel high temperature transient window has been identified for the production of pore-free intermetallic and intermetallic composite rods and wires.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Intermetallics and Advanced Alloy Properties · Advanced ceramic materials synthesis · Aluminum Alloys Composites Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (33)
Show source-provided references
1. Sikka · Mater. Sci. Eng. · 1992 · A153 · 71210.1016/0921-5093(92)90276-7 ↗
2. Stoloff · 1996 · 205
3. Stoloff · 1996 · 202
4. Misiolek · Mater. Sci. Eng. · 1991 · A144 · 110.1016/0921-5093(91)90204-Z ↗
5. Philpot · J. Mater. Sci. · 1987 · 22 · 15910.1007/BF01160566 ↗
6. Miura · Intermetallics · 1997 · 5 · 4510.1016/S0966-9795(96)00065-9 ↗
7. Alman · J. Mater. Sci. Lett. · 1994 · 13 · 48310.1007/BF00540174 ↗
8. Morsi · Scripta Mater. · 1999 · 40 · 35910.1016/S1359-6462(98)00439-4 ↗
9. J. Knibloe, R. Wright, Proceedings PM ‘90 International Conference on Powder Metallurgy 2, The Institute of Metals, 1990, pp. 310–323.10.1179/pom.1990.33.3.253 ↗
10. Bowman · Met. Trans. · 1992 · 23A · 149310.1007/BF02647332 ↗
11. Morsi · Scripta Mater. · 1997 · 37 · 183910.1016/S1359-6462(97)00319-9 ↗
12. Dunand · Mater. Manuf. Process. · 1995 · 10 · 37310.1080/10426919508935033 ↗
13. Rice · J. Am. Cer. Soc. · 1985 · 68 · C12210.1111/j.1151-2916.1985.tb15328.x ↗
14. Morsi · J. Mater. Sci. · 1999 · 34 · 280110.1023/A:1004666830950 ↗
15. Avitzur · 1983 · 149
16. Huttgren · 1966 · 28
17. Alman · Int. J. Powder Metall. · 1991 · 27 · 29
18. Barin · 1977
19. E.A. Brandes, G.B. Brook (Eds.), Smithells Metals Reference Book, Seventh editon, 1987.
20. Dashwood · 1995 · 336
21. Yamaghchi · 1995 · 449
22. Pearson · 1944 · 152
23. K. Morsi, H. McShane, M. McLean, J. Mater. Sci. Lett. 19 (2000) 331–332.10.1023/A:1006770916085 ↗
24. The Materials Information Society, Ceramics and Glasses, Engineered Materials Handbook, ASM International 4 (1992) p.30.
25. High temperature ordered intermetalic alloys10.1557/PROC-39-505 ↗
26. Todd · 1997 · 57 · 87
27. Krstic · Acta Metall. · 1983 · 31 · 13910.1016/0001-6160(83)90073-1 ↗
28. Larkin · J. Mater. Res. · 1990 · 5 · 270610.1557/JMR.1990.2706 ↗
29. Yang · Mat. Res. Soc. Symp. Proc. · 1989 · 133 · 45310.1557/PROC-133-453 ↗
30. Liang · Mater. Sci. Eng. · 1992 · A153 · 64610.1016/0921-5093(92)90265-3 ↗
31. K. Morsi, H.B. McShaw, M. McLean, Met. Mater. Trans. A (in press).
32. High temperature ordered intermetallic alloys III10.1557/PROC-133-603 ↗
33. Stoloff · 1996 · 628