journal article·2002-08

Microstructural evolution during high-temperature exposure in a thixocast magnesium alloy

E Cerri, M Cabibbo, E Evangelista

Materials Science and Engineering: A· Volume 333· Issue 1-2
Publisher page

Abstract

Abstract The microstructure of a thixoformed AZ91 (Mg–Al–Zn system) alloy was investigated by different techniques after various heat-treatment conditions. The material, supplied in the as-thixocast state, consisted of large α globules separated by a quasi-eutectic phase (α+β). The alloy was exposed to high temperature (395, 415 and 435 °C) for different times to assess its response. Optical metallography showed that the α-Mg-based areas developed into individual grains, whereas β-phase (Mg 17 Al 12 ) particles were present only in the eutectic area of the base material. The eutectic was found on grain boundaries and α-Mg-based grains became enriched in aluminium and zinc due to simultaneous β-phase dissolution and reduction in the amount of eutectic quantity. Static precipitation and/or dissolution were studied at the three treatment temperatures by TEM. A comprehensive study of precipitate evolution at temperatures very close to the solution is relevant because this thixocast magnesium alloy exhibits a good combination of high-temperature tensile strength and ductility in that temperature range.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Magnesium Alloys: Properties and Applications · Aluminum Alloy Microstructure Properties · Aluminum Alloys Composites Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (21)

Show source-provided references
1. Mordike · Mater. Sci. Eng. A · 2001 · 302 · 3710.1016/S0921-5093(00)01351-4 ↗
2. D.J. Sakkinen, Physical Metallurgy of Magnesium Die Cast Alloys, SAE technical paper 940779, SAE, Detroit, MI, USA, 1994.10.4271/940779 ↗
3. Duly · Acta Metall. Mater. · 1994 · 42 · 3036
4. Duly · Acta Metall. Mater. · 1994 · 42 · 384310.1016/0956-7151(94)90450-2 ↗
5. Duly · Acta Metall. Mater. · 1995 · 43 · 101
6. Celotto · Acta Mater. · 2000 · 48 · 177510.1016/S1359-6454(00)00004-5 ↗
7. Bardi · 1998 · 337
8. Cabibbo · 2000 · 301
9. Handbook of Ternary Alloys Phase Diagram, vol. 3, ASM, 1995, pp. 3891–3895, 3907–3910, 3938–3948, 3974.
10. D.J. Sakkinen, Physical Metallurgy of Magnesium Die Cast Alloys, SAE technical paper 940769, SAE, Detroit, MI, USA, 1994.10.4271/940779 ↗
11. Kaya · Mater. Sci. Technol. · 2000 · 16 · 100110.1179/026708300101508955 ↗
12. Shechtman · Phys. Rev. Lett. · 1984 · 53 · 2010.1103/PhysRevLett.53.1951 ↗
13. Cassada · Phys. Rev. Lett. · 1986 · 56 · 2110.1103/PhysRevLett.56.2276 ↗
14. Kelton · Int. Mater. Rev. · 1993 · 38 · 10510.1179/imr.1993.38.3.105 ↗
15. Ball · Scr. Metall. · 1985 · 19 · 106510.1016/0036-9748(85)90010-9 ↗
16. Cabibbo · Mater. Lett. · 2001 · 49 · 4310.1016/S0167-577X(00)00339-6 ↗
17. M. Cabibbo, PhD. Dissertation, University of Rome, 2000.
18. Bergman · Acta Crystallogr. · 1957 · 10 · 25410.1107/S0365110X57000808 ↗
19. Takeuchi · Phys. Rev. B · 1995 · 52 · 930010.1103/PhysRevB.52.9300 ↗
20. Cabibbo · 2001 · 211
21. Rylands · J. Mater. Sci. · 1994 · 29 · 189510.1007/BF00351310 ↗