journal article·2004-12Open access

Plastic flow of martensitic model alloys

R. Bonadé, P. Spätig, R. Schäublin, M. Victoria

Abstract

Modeling of the constitutive behavior was undertaken for Fe- Cr-C tempered martensitic alloys. Tensile tests were carried out at room temperature and constant nominal strain rate. In order to obtain a fully martensitic structure with different prior austenite grain size, two heat-treatments, consisting of an austenization followed by a tempering, were applied to the alloys. Two tempered martensitic structures were so produced with two different prior austenite grain sizes. The "as-heat-treated" microstructures were well characterized by electron transmission microscopy and metallographic observations. The effect of the prior austenite grain size on the yield stress and on the strain-hardening was investigated. It was found that a moderate increase of the yield stress exists, which is certainly not consistent with a Hall-Petch relationship between the yield stress and the prior austenite grain size. The post-yield behavior was found completely unaffected by the prior austenite grain size. The stress dependence of the strain-hardening was shown to be consistent with a simplified phenomenological description of the strain-hardening based on one structural parameter, the total dislocation density. An effective mean displacement distance of the dislocations was estimated form the strain-hardening law, equal to about 10 mum independently of the prior austenite grain site. (C) 2004 Elsevier B.V. All rights reserved.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Microstructure and Mechanical Properties of Steels · Metallurgy and Material Forming · High Temperature Alloys and Creep

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (18)

Show source-provided references
1. Klueh · J. Nucl. Mater · 2002 · 307–311 · 45510.1016/S0022-3115(02)01082-6 ↗
2. Odette · J. Nucl. Mater · 2003 · 323 · 31310.1016/j.jnucmat.2003.08.023 ↗
3. P. Spätig, R. Schäublin, M. Victoria, in: H.M. Zbib, G.H. Campbell, M. Victoria, D.A. Hughes, L.E. Levine (Eds.), Material Instabilities and Patterning in Metals, Mater. Res. Soc. Symp. Proc., Spring Meeting, vol. 683E, MRS Warrendale, PA, USA, 2001, pp. BB1.10.1–BB1.10.6.
4. Spätig · Mater. Sci. Eng · 2001 · A309–310 · 42510.1016/S0921-5093(00)01634-8 ↗
5. Pesicka · Acta Mater · 2003 · 51 · 484710.1016/S1359-6454(03)00324-0 ↗
6. Dronhofer · Z. Metallkd · 2003 · 94 · 510.3139/146.030511 ↗
7. Morito · Acta Mater · 2003 · 51 · 178910.1016/S1359-6454(02)00577-3 ↗
8. Sandvik · Metallography · 1983 · 16 · 19910.1016/0026-0800(83)90005-8 ↗
9. Hansen · Metall. Trans · 1985 · A16 · 216710.1007/BF02670417 ↗
10. Morrison · J. Iron Steel Inst · 1963 · 201 · 317
11. A.R. Mader, G. Krauss, in: Second International Conference on the Strength of Metals and Alloys, Conference Proceedings, vol. III, Asilomar Pacific Grove, CA, USA, American Society for Metal, Metals Park, OH, USA, 1970, pp. 822–823.
12. Swarr · Metall. Trans · 1976 · A7 · 4110.1007/BF02644037 ↗
13. Kocks · J. Eng. Mater. Technol. (ASM H) · 1976 · 98 · 7610.1115/1.3443340 ↗
14. Mecking · Acta Metall · 1981 · 29 · 186510.1016/0001-6160(81)90112-7 ↗
15. Estrin · Acta Metall · 1984 · 32 · 5710.1016/0001-6160(84)90202-5 ↗
16. G.E. Dieter, Mechanical Metallurgy, McGraw-Hill Book Co, London, UK, 1988, p. 232.
17. Fang · Mater. Sci. Eng · 1995 · A203 · 1410.1016/0921-5093(95)09841-0 ↗
18. Schäublin · J. Nucl. Mater · 1998 · 258–263 · 117810.1016/S0022-3115(98)00182-2 ↗