journal article·2022-02

Fabrication of heparinized small diameter TPU/PCL bi-layered artificial blood vessels and in vivo assessment in a rabbit carotid artery replacement model

Zhiping Fang, Yonghao Xiao, Xue Geng, Liujun Jia, Yuehao Xing, Lin Ye, Yongquan Gu, Ai-ying Zhang, Zeng-guo Feng

Publisher page

Abstract

Increasingly growing problems in vascular access for long-term hemodialysis lead to a considerable demand for synthetic small diameter vascular prostheses, which usually suffer from some drawbacks and are associated to high failure rates. Incorporating the concept of in situ tissue engineering (TE) into synthetic small diameter blood vessels, for example, thermoplastic poly(ether urethane) (TPU) ones, could provide an alternative approach for vascular access that profits from the advantages of excellent mechanical properties of synthetic polymer materials (early cannulation) and unique biointegration regeneration of autologous neovascular tissues (long-term fistulae). In this study, a kind of heparinized small diameter (d = 2.5 mm) TPU/poly(ε-caprolactone) (TPU/PCL-Hep) bi-layered blood vessels was electrospun with an inner layer of PCL and an outer layer of TPU. Afterward, the inner surface heparinization was conducted by coupling H2N-PEG-NH2 to the corroded PCL layer and then heparin to the attached H2N-PEG-NH2 via the EDCI/NHS chemistry. Herein a heparinized PCL inner layer could not only inhibit thrombosis, but also provide sufficient space for the neotissue regeneration via biodegradation with time. Meanwhile, a TPU outer layer could confer the vascular access the good mechanical properties, such as flexibility, viability and fitness of elasticity between the grafts and host blood vessels as evidenced by the adequate mechanical properties, such as compliance (4.43 ± 0.07%/ 100 mmHg), burst pressure (1447 ± 127 mmHg) and suture retention strength (1.26 ± 0.07 N) without blood seepage after implantation. Furthermore, a rabbit carotid aortic replacement model for 5 months was demonstrated 100% animal survival and 86% graft patency. Puncture assay also revealed the puncture resistance and self-sealing (hemostatic time < 2 min). Histological analysis highlighted neotissue regeneration, host cell infiltration and graft remodeling in terms of extracellular matrix turnover. Altogether, these results showed promising aspects of small diameter TPU/PCL-Hep bi-layered grafts for hemodialytic vascular access applications.
Source: europepmc · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Electrospun Nanofibers in Biomedical Applications · Tissue Engineering and Regenerative Medicine · Infectious Aortic and Vascular Conditions

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (51)

Show source-provided references
1. Global atlas of cardiovascular disease 2000–2016: the path to prevention and control10.1016/j.gheart.2018.09.511 ↗
2. A global brief on hypertension : silent killer, global public health crisis
3. Small-diameter vascular tissue engineering10.1038/nrcardio.2013.77 ↗
4. Decellularized tissue-engineered blood vessel as an arterial conduit10.1073/pnas.1019506108 ↗
5. Innovations in vascular access for hemodialysis10.1016/j.kint.2018.11.046 ↗
6. Vascular access animal models used in research10.1016/j.aanat.2019.06.002 ↗
7. Upper arm polytetrafluoroethylene grafts for dialysis access. Analysis of two different graft sizes: 6 mm and 6–8 mm10.1177/153857440303700505 ↗
8. Patterns of blood flow as a predictor of maturation of arteriovenous fistula for haemodialysis10.5301/jva.5000214 ↗
9. Considerations in the development of small-diameter vascular graft as an alternative for bypass and reconstructive surgeries: a review, cardiovasc
10. From in vitro to in situ tissue engineering10.1007/s10439-014-1022-8 ↗
11. Vascular tissue engineering: from in vitro to in situ10.1002/wsbm.1246 ↗
12. Challenges and strategies for in situ endothelialization and long-term lumen patency of vascular grafts
13. Biomaterial-driven in situ cardiovascular tissue engineering-a multi-disciplinary perspective10.1038/s41536-017-0023-2 ↗
14. Remodeling of a cell-free vascular graft with nanolamellar intima into a neovessel10.1021/acsnano.9b04704 ↗
15. Advances in intrinsic self-healing polyurethanes and related composites10.1039/D0RA01394C ↗
16. Highly tough and ultrafast self-healable dual physically crosslinked sulfated alginate-based polyurethane elastomers for vascular tissue engineering10.1016/j.carbpol.2021.117632 ↗
17. The applications of heparin in vascular tissue engineering10.1016/j.mvr.2020.104027 ↗
18. Electrospun poly(epsilon-caprolactone) microfiber and multilayer nanofiber/microfiber scaffolds: characterization of scaffolds and measurement of cellular infiltration10.1021/bm060680j ↗
19. Preparation of small-diameter tissue-engineered vascular grafts electrospun from heparin end-capped PCL and evaluation in a rabbit carotid artery replacement model10.1002/mabi.201900114 ↗
20. Preparation and in vivo evaluation of surface heparinized small diameter tissue engineered vascular scaffolds of poly(epsilon-caprolactone) embedded with collagen suture10.1177/0885328219873174 ↗
21. Heparin-conjugated PCL scaffolds fabricated by electrospinning and loaded with fibroblast growth factor 210.1163/092050610X487710 ↗
22. A new Polyurethane/Heparin vascular graft for small-caliber vein repair10.1177/0883911507078386 ↗
23. Enhanced patency and endothelialization of small-caliber vascular grafts fabricated by coimmobilization of heparin and cell-adhesive peptides10.1021/acsami.5b12052 ↗
24. Biomimetic modification of polyurethane-based nanofibrous vascular grafts: a promising approach towards stable endothelial lining10.1016/j.msec.2017.05.140 ↗
25. Wavy small-diameter vascular graft made of eggshell membrane and thermoplastic polyurethane10.1016/j.msec.2019.110311 ↗
26. Evaluation of human umbilical vein endothelial cells growth onto heparin-modified electrospun vascular grafts10.1016/j.ijbiomac.2021.03.008 ↗
27. DiameterJ: a validated open source nanofiber diameter measurement tool10.1016/j.biomaterials.2015.05.015 ↗
28. Hybrid small-diameter vascular grafts: anti-expansion effect of electrospun poly ε-caprolactone on heparin-coated decellularized matrices10.1016/j.biomaterials.2015.10.066 ↗
29. Cardiovascular implants and extracorporeal systems – vascular prostheses – tubular vascular grafts and vascular patches
30. Colorimetric method for the assay of heparin content in immobilized heparin preparations10.1016/0003-2697(80)90679-X ↗
31. Effect of fibre laser process on in-vitro degradation rate of a polycaprolactone stent a novel degradation study method10.1016/j.polymdegradstab.2017.05.028 ↗
32. Driessen-Mol, hydrolytic and oxidative degradation of electrospun supramolecular biomaterials: in vitro degradation pathways10.1016/j.actbio.2015.08.034 ↗
33. The ARRIVE guidelines 2.0: updated guidelines for reporting animal research
34. Ethanol-lubricated expanded-polytetrafluoroethylene vascular grafts loaded with eggshell membrane extract and heparin for rapid endothelialization and anticoagulation10.1016/j.apsusc.2020.145565 ↗
35. A pilot study to measure vascular compliance changes during fistula maturation using open-source software10.1177/1129729818773307 ↗
36. Dynamic straining combined with fibrin gel cell seeding improves strength of tissue-engineered small-diameter vascular grafts10.1089/ten.tea.2008.0183 ↗
37. Electrospun scaffolds for tissue engineering of vascular grafts10.1016/j.actbio.2013.08.022 ↗
38. Challenges and novel therapies for vascular access in haemodialysis10.1038/s41581-020-0333-2 ↗
39. New devices and technologies for hemodialysis vascular access: a review10.1053/j.ajkd.2020.11.027 ↗
40. KDOQI clinical practice guideline for vascular access: 2019 update10.1053/j.ajkd.2019.12.001 ↗
41. Barriers to optimal vascular access for hemodialysis10.1111/sdi.12922 ↗
42. Tissue engineering at the blood-contacting surface: a review of challenges and strategies in vascular graft development10.1002/adhm.201701461 ↗
43. Multi-layer approaches to scaffold-based small diameter vessel engineering: a review10.1016/j.msec.2018.12.067 ↗
44. Electrospinning and electrospun nanofibers: methods, materials, and applications10.1021/acs.chemrev.8b00593 ↗
45. Optimization of electrospun poly(caprolactone) fiber diameter for vascular scaffolds to maximize smooth muscle cell infiltration and phenotype modulation10.3390/polym11040643 ↗
46. The effect of thick fibers and large pores of electrospun poly(ε-caprolactone) vascular grafts on macrophage polarization and arterial regeneration10.1016/j.biomaterials.2014.03.078 ↗
47. Bioresorbable silk grafts for small diameter vascular tissue engineering applications: in vitro and in vivo functional analysis10.1016/j.actbio.2020.01.020 ↗
48. Fast-degrading elastomer enables rapid remodeling of a cell-free synthetic graft into a neoartery10.1038/nm.2821 ↗
49. Quickening: translational design of resorbable synthetic vascular grafts10.1016/j.biomaterials.2018.05.006 ↗
50. Effect of in vitro enzymatic degradation on 3D printed poly(epsilon-caprolactone) scaffolds: morphological, chemical and mechanical properties
51. Enzymatic hydrolysis of polyester: degradation of poly(epsilon-caprolactone) by Candida antarctica lipase and fusarium solani cutinase10.1016/j.ijbiomac.2019.12.105 ↗