Effect of strength on environment-assisted cracking of Ti–8V–6Cr–4Mo–4Zr–3Al in aqueous NaCl
Bibliographic record
Abstract
No abstract is available for this record. The assistant can identify its topic from the title, but cannot infer the study’s results.
Source: Not provided · Quality: missing
Research context
OpenAlex topics: Titanium Alloys Microstructure and Properties · Hydrogen embrittlement and corrosion behaviors in metals · Orthopaedic implants and arthroplasty
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (35)
Show source-provided references
1. B.P. Somerday, J.A. Grandle, R.P. Gangloff, in: T. Naguy (Ed.), Proceedings of the Tri-Service Conference on Corrosion, Materials Laboratory, Wright-Patterson Air Force Base, OH, 1994, pp. 375–392.
2. Young · Metall. Mater. Trans. A · 1995 · 26A · 125710.1007/BF02670620 ↗
3. B.P. Somerday, PhD Dissertation, University of Virginia, Charlottesville, VA, 1998.
4. M.J. Blackburn, W.H. Smyrl, J.A. Feeney, in: B.F. Brown (Ed.), Stress Corrosion Cracking in High Strength Steel and in Titanium and Aluminum Alloys, Naval Research Laboratory, Washington, DC, 1972, pp. 245–363.
5. Feeney · Metall. Trans. · 1970 · 1 · 330910.1007/BF02642025 ↗
6. M.J. Blackburn, J.A. Feeney, T.R. Beck, in: M.G. Fontana, R.W. Staehle (Eds.), Advances in Corrosion Science and Technology, vol. 3, Plenum, New York, 1972, pp. 67–292.10.1007/978-1-4615-8258-8_2 ↗
7. D.G. Kolman, PhD Dissertation, University of Virginia, Charlottesville, VA, 1995.
8. R.J. Stokes, MS Thesis, University of Kentucky, Lexington, KY, 1976.
9. D.H. Wilson, C.M. Esler, in: R.R. Boyer, H.W. Rosenberg (Eds.), Beta Titanium Alloys in the 80’s, Metallurgical Society of AIME, Warrendale, PA, 1984, pp. 457–482.
10. G.T. Terlinde, T.W. Duerig, J.C. Williams, Metall. Trans. A 14A (1982) pp. 2101–2115.
11. Gysler · Acta Metall. · 1974 · 22 · 90110.1016/0001-6160(74)90057-1 ↗
12. R.P. Gangloff, in: M. Levy, S. Isserow, (Eds.), Corrosion Prevention and Control, US Army Laboratory Command, Watertown, MA, 1986, pp. 64–111.
13. M.J. Morgan, C.J. McMahon, in: R.A. Oriani, J.P. Hirth, M. Smialowski (Eds.), Hydrogen Degradation of Ferrous Alloys, Noyes Publications, Park Ridge, NJ, 1985, pp. 608–640.
14. Atlas of Stress-Corrosion and Corrosion Fatigue Curves, A.J. McEvily, Jr (Eds.), ASM, Materials Park, OH, 1990, pp. 457, 484.
15. D.G. Kolman, J.R. Scully, in: W.A. Van der Sluys, R.S. Piascik, R. Zawierucha (Ed.), Effects of the Environment on the Initiation of Crack Growth, ASTM STP 1298, ASTM, Philadelphia, PA, 1997, pp. 61–73.10.1520/STP19953S ↗
16. D.A. Meyn, P.S. Pao, in: R.D. Kane (Ed.), Slow Strain Rate Testing for the Evaluation of Environmentally Induced Cracking: Research and Engineering Applications, ASTM STP 1210, ASTM, Philadelphia, PA, 1993, pp. 158–169.10.1520/STP12761S ↗
17. B.P. Somerday, L.M. Young, R.P. Gangloff: Environment-Assisted Cracking of Beta-Titanium Alloys in Aqueous NaCl: Active Crack Tip Strain Rate and Stress Intensity Effects, Fatigue Fract. Eng. Mater. Struct. (1998) (in review).
18. Moskovitz · Corrosion · 1979 · 35 · 50910.5006/0010-9312-35.11.509 ↗
19. L.M. Young, MS Thesis, University of Virginia, Charlottesville, VA, 1993.
20. B.P. Somerday, A.W. Wilson, J.M. Howe, R.P. Gangloff (1998) (in preparation).10.1016/S0921-5093(98)00695-9 ↗
21. B.P. Somerday, R.P. Gangloff (1998) (in preparation).10.1016/S0921-5093(98)00695-9 ↗
22. Annual Book of ASTM Standards, Designation E647-88, vol. 3.01, ASTM, Philadelphia, PA, 1989, pp. 646–666.
23. J.K. Donald, J. Ruschau, in: K.J. Marsh, R.A. Smith, R.O. Ritchie (Eds.), Fatigue Crack Measurement: Techniques and Applications, EMAS, West Midlands, UK, 1991, pp. 11–37.
24. Annual Book of ASTM Standards, Designation E1152-87, vol. 3.01, ASTM, Philadelphia, PA, 1991, pp. 825–835.
25. Hutchinson · J. Appl. Mech. Trans. ASME · 1983 · 50 · 104210.1115/1.3167187 ↗
26. Somerday · Fatigue Fract. Eng. Mater. Struct. · 1995 · 18 · 56510.1111/j.1460-2695.1995.tb01418.x ↗
27. Rhodes · Metall. Trans. A · 1977 · 8A · 174910.1007/BF02646879 ↗
28. H.J. Rack, in: H. Kimura, O. Izumi (Eds.), Titanium ‘80 Science and Technology, Metallurgical Society of AIME, Warrendale, PA, 1980, pp. 1627–1635.
29. L. Wagner, J.K. Gregory, in: D. Eylon, R.R. Boyer, D.A. Koss (Eds.), Beta Titanium Alloys in the 1990’s, TMS, Warrendale, PA, 1993, pp. 199–209
30. J.R. Rice, W.J. Drugan, T-L. Sham, in: P.C. Paris (Ed.), Fracture Mechanics: 12th Conference, ASTM STP 700, ASTM, Philadelphia, PA, 1980, pp. 189–221.
31. G. Terlinde, H.-J. Rathjen, K.-H. Schwalbe, Metall. Trans. A 19A (1988) pp. 1037–1049.10.1007/BF02628388 ↗
32. Ankem · Metall. Trans. A · 1987 · 18A · 201510.1007/BF02647074 ↗
33. Akhurst · Metall. Trans. A · 1980 · 12A · 1059
34. McMeeking · J. Mech Phys. Solids · 1977 · 25 · 35710.1016/0022-5096(77)90003-5 ↗
35. Thomason · 1990