journal article·2025-11

Synergy between microstructure anisotropy and size effects on the ductile failure of hastelloy X printed by laser power bed fusion

B. Vieille, R. Henry, L. Avegnon, M.P. Sealy, Q. Sirvin, D. Texier, C. Keller

Publisher page

Abstract

This work addresses the effect of the microstructural anisotropy, both morphological and crystallographic due to fabrication strategy, and the size-effects on the fracture behavior of Hastelloy X superalloys printed by Laser Power Bed Fusion (LPBF-HX). It aims at specifically investigating the role played by crack orientation (perpendicular or co-linear to sample lasing planes) on the fracture toughness values of LPBF-HX. Micro-cantilever bending tests have been conducted on vertically or horizontally built specimens to estimate the fracture toughness at the microscopic scale depending on the initial notch orientation. LPBF-HX results in complex microstructural features at the micro- and mesoscale, which significantly impair the fracture mechanisms. At both microscopic and macroscopic scales, cracking occurs along with a ductile tearing. A simple analytical model has been applied to account for the size effect on the fracture behavior depending on the building direction and notch orientation. This model provides internal characteristic lengths, , which is a key parameter for transition rules from small to large scale. In horizontal specimens, the value of is equal to 1.33 mm, whereas it slightly increases to 1.57 mm in vertical specimens. The knowledge of the size effect law using internal characteristic lengths is crucial for the determination of the R-curve at different scales.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Additive Manufacturing Materials and Processes · Microstructure and mechanical properties · Metal Forming Simulation Techniques

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (36)

Show source-provided references
1. Quantifying microstructural contribution to yield stress and strain hardening of Ni20Cr alloy manufactured by laser powder bed fusion with different volumetric energy densities10.1016/j.jallcom.2023.172241 ↗
2. On the origin of the strain hardening mechanisms of Ni20Cr alloy manufactured by laser powder bed fusion10.1016/j.ijplas.2023.103610 ↗
3. Influence of the scanning strategy on the microstructure and the tribological behavior of a Ni-based superalloy processed by L-PBF additive manufacturing
4. Strain gradient plasticity: theory and experiment10.1016/0956-7151(94)90502-9 ↗
5. Effects of focused ion beam milling on the compressive behavior of directionally solidified micropillars and the nanoindentation response of an electropolished surface10.1016/j.actamat.2008.09.033 ↗
6. Fracture mechanics of micro samples: fundamental considerations10.1016/j.matdes.2018.09.004 ↗
7. Size effect and other effects on mode I fracture toughness using two testing methods10.1016/j.ijrmms.2021.104785 ↗
8. Size effects on fracture toughness of quasi-brittle materials – a new approach10.1016/j.engfracmech.2012.06.005 ↗
9. In-situ elastic-plastic fracture mechanics on the microscale by means of continuous dynamical testing10.1016/j.matdes.2018.03.051 ↗
10. Ductile fracture toughness of polycrystalline armco iron of varying grain size10.1016/0956-7151(91)90280-E ↗
11. Nonlinear fracture properties from size effect tests10.1061/(ASCE)0733-9445(1986)112:2(289) ↗
12. Identification of nonlinear fracture properties from size effect tests and structural analysis based on geometry-dependent R-curves10.1016/0148-9062(91)93232-U ↗
13. Stress intensity factor dependence on anisotropy and geometry during micro-fracture experiments10.1016/j.scriptamat.2016.08.027 ↗
14. Experimental evaluation of the size effect on the ductile and brittle fracture toughness of a steel pressure vessel
15. Influence of grain size on the ductile fracture toughness of ferritic steel10.2355/isijinternational.54.1958 ↗
16. Characterization of the fracture toughness of micro-sized tungsten single crystal notched specimens10.1080/14786435.2012.658449 ↗
17. Microcantilever bending experiments in NiAl - Evaluation, size effects, and crack tip plasticity10.1557/jmr.2014.240 ↗
18. Small-scale fracture mechanics of ductile materials: advantage of fatigue precracks and comparison of J-integral evaluations10.1016/j.mtla.2018.09.011 ↗
19. A review of experimental approaches to fracture toughness evaluation at the micro-scale10.1016/j.matdes.2019.107762 ↗
20. Investigation of microstructure and failure mechanisms at room and elevated temperature of hastelloy X produced by laser powder-bed fusion
21. Fracture behavior of hastelloy X elaborated by laser powder bed fusion: influence of microstructure and building direction10.1016/j.jallcom.2022.165570 ↗
22. The importance of fracture toughness evaluation for additively manufactured metals10.1016/j.actamat.2024.120061 ↗
23. Influence of a rescanning strategy with different laser powers on the microstructure and mechanical properties of hastelloy X elaborated by powder bed fusion
24. FIB damage of Cu and possible consequences for miniaturized mechanical tests10.1016/j.msea.2007.01.046 ↗
25. 2001
26. Cracks in composite materials
27. Tada · 2000
28. A non-iterative parameter identification procedure for the non-local Gurson–Tvergaard–Needleman model based on standardized experiments10.1007/s10704-023-00689-9 ↗
29. Size effect in blunt fracture: concrete, rock, metal
30. Determination of fracture energy, process zone length and brittleness number from size effect, with application to rock and concrete10.1007/BF00047063 ↗
31. Elastic-Plastic fracture mechanics
32. Size-effect method to determine mode-I fracture toughness of aluminium alloys10.1016/j.engfracmech.2020.107504 ↗
33. Structural strength scaling law for fracture of plastic-hardening metals and testing of fracture properties10.1016/j.eml.2020.101141 ↗
34. New formulation for fracture toughness characterization using four-point bend specimens
35. A review of the residual stress generation in metal additive manufacturing: analysis of cause, measurement, effects, and prevention10.3390/mi14071480 ↗
36. Determination of J-integral R-curves for Hastelloyx X and Inconel 617 up to 1223K using the potential drop technique10.1002/mawe.19820130704 ↗