journal article·2025-11Open access

Tensile properties and fracture toughness of chemically-architectured high-entropy alloys

Y. Madi, A-F. Gourgues-Lorenzon, B. Villeroy, M. Laurent-Brocq

Abstract

Chemically-architectured materials combine a Ni matrix with a high-entropy alloy (HEA) phase to introduce a controlled chemical gradient. These materials are currently processed through spark plasma sintering (SPS) and are only available in limited quantities. In this work, their tensile properties and fracture toughness were determined for the first time using miniaturized specimens. A tensile yield strength of 476 MPa, a fracture elongation of 23%, and a fracture toughness of 41 MPa ⋅ m were measured for a chemically-architectured alloy exhibiting a steep chemical gradient. For a smoother gradient, the yield stress decreased to 338 MPa while the tensile elongation and fracture toughness increased to 44 % and 125 MPa ⋅ m , respectively. Chemical architecturation resulted in strengthening compared to a reference SPSed HEA, but at the expense of ductility and fracture resistance. Impurity particles located at prior HEA particle boundaries played a critical role in the ductile damage and fracture mechanisms. Earlier void nucleation and accelerated damage development were observed in the material with the steeper chemical gradient, while the softer Ni-rich matrix appeared as a preferred path for fatigue crack propagation. Based on these results, guidelines for further microstructural optimization of these alloys were proposed to improve their mechanical properties.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: High Entropy Alloys Studies · High-Temperature Coating Behaviors · Advanced materials and composites

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (36)

Show source-provided references
1. Six decades of the Hall–Petch effect – a survey of grain-size strengthening studies on pure metals10.1080/09506608.2016.1191808 ↗
2. The Hall–Petch and inverse Hall–Petch relations and the hardness of nanocrystalline metals10.1007/s10853-019-04160-w ↗
3. Combining experiments and modeling to explore the solid solution strengthening of high and medium entropy alloys10.1016/j.actamat.2019.06.050 ↗
4. A novel strategy for the design of compositionally complex alloys for advanced nuclear applications
5. Alloy design strategies to increase strength and its trade-offs together10.1016/j.pmatsci.2020.100720 ↗
6. Recent progress in medium-Mn steels made with new designing strategies, a review10.1016/j.jmst.2017.06.017 ↗
7. Chemical architecturation of high entropy alloys through powder metallurgy10.1016/j.jallcom.2020.155279 ↗
8. Ultrahigh specific strength in a magnesium alloy strengthened by spinodal decomposition10.1126/sciadv.abf3039 ↗
9. Hardening by spinodal modulated structure10.1016/0001-6160(80)90163-7 ↗
10. Hardening of aged duplex stainless steels by spinodal decomposition10.1017/S1431927604040516 ↗
11. Heterogeneous and architectured materials: A possible strategy for design of structural materials10.1002/adem.200700289 ↗
12. Towards strength–ductility synergy through the design of heterogeneous nanostructures in metals10.1016/j.mattod.2017.02.003 ↗
13. The fcc solid solution stability in the Co–Cr–Fe–Mn–Ni multi-component system10.1016/j.actamat.2017.02.017 ↗
14. Microstructure evolution and critical stress for twinning in the CrMnFeCoNi high-entropy alloy10.1016/j.actamat.2016.07.038 ↗
15. A fracture-resistant high-entropy alloy for cryogenic applications10.1126/science.1254581 ↗
16. Combining tensile tests and nanoindentation to explore the strengthening of high and medium entropy alloys10.1016/j.mtla.2019.100404 ↗
17. The influences of temperature and microstructure on the tensile properties of a CoCrFeMnNi high-entropy alloy10.1016/j.actamat.2013.06.018 ↗
18. Chemically architectured alloys: How interphase width influences the strengthening10.1016/j.jallcom.2022.163997 ↗
19. Unravelling the extra-hardening in chemically architectured high entropy alloys10.1016/j.commatsci.2023.112714 ↗
20. Mechanical characterization of hydrogen embrittlement in a gaseous environment: An innovative test setup using sub-size specimens10.1016/j.engfailanal.2024.108362 ↗
21. Specimen size effect on the tensile properties of rolled steel of long-term-operated portal crane10.3390/ma16083017 ↗
22. Mechanical and fracture characterization of a bi-material steel plate10.1016/S0308-0161(02)00012-1 ↗
23. Procedure for the determination of true stress-strain curves from tensile tests with rectangular cross-section specimens10.1115/1.1633573 ↗
24. 25 Year perspective aspects of strain and strength measurement in miniaturised testing for engineering metals and ceramics10.1179/026708309X12584564052012 ↗
25. Optimum use of broken Charpy specimens from surveillance programs for the application of the master curve approach10.1023/A:1020165900918 ↗
26. Evaluation of fracture toughness by master curve approach using miniature C(T) specimens10.1115/1.4005390 ↗
27. The effect of loss of constraint on the initiation of ductile fracture in a mini-CT
28. Additive manufacturing of carbon steel with site-specific compositions and properties using binder jetting and spark plasma sintering
29. Twin induced fracture toughness in SiCW/SiC composites processed by spark plasma sintering10.1016/j.msea.2018.06.007 ↗
30. Standard test method for measurement of fracture toughness
31. Edge tracing technique to study post-necking behavior and failure in Al alloys and anisotropic plasticity in line pipe steels10.1111/ffe.13754 ↗
32. High-temperature stability of chemically architectured high entropy alloys studied by X-ray diffraction and diffusion modelling10.1016/j.jallcom.2024.175003 ↗
33. Hydrogen-induced intergranular cracking of pure nickel under various strain rates and temperatures in gaseous hydrogen environment10.1016/j.msea.2023.145040 ↗
34. Mn-Ni (Manganese-Nickel)10.1007/s11669-007-9118-6 ↗
35. Local and nonlocal magnetic behavior of dilute manganese-doped nickel alloys10.1063/1.3116154 ↗
36. Grain boundary segregation engineering and austenite reversion turn embrittlement into toughness: Example of a 9 wt.% medium Mn steel10.1016/j.actamat.2014.12.021 ↗