journal article·2025-11

Pulsed electric-induced synergistic strengthening in metastable dual-phase CoCrFeNiAl0.5 high-entropy alloy overcomes the strength-ductility trade-off

Qiang Li, Mingxia Wu, Ling Xue, Yuwen Wang, Haoran Cao, Jian Liu, Yi Yang

Publisher page

Abstract

No abstract is available for this record. The assistant can identify its topic from the title, but cannot infer the study’s results.

Source: Not provided · Quality: missing

Research context

OpenAlex topics: High Entropy Alloys Studies · Intermetallics and Advanced Alloy Properties · Advanced materials and composites

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (83)

Show source-provided references
1. High-throughput and data-driven machine learning techniques for discovering high-entropy alloys10.1038/s43246-024-00487-3 ↗
2. Exceptional damage-tolerance of a medium-entropy alloy CrCoNi at cryogenic temperatures10.1038/ncomms10602 ↗
3. Overcoming strength-toughness trade-off in a eutectic high entropy alloy by optimizing chemical and microstructural heterogeneities10.1038/s43246-024-00450-2 ↗
4. Interstitial equiatomic CoCrFeMnNi high-entropy alloys: carbon content, microstructure, and compositional homogeneity effects on deformation behavior10.1016/j.actamat.2018.10.050 ↗
5. Metastable high-entropy dual-phase alloys overcome the strength–ductility trade-off10.1038/nature17981 ↗
6. Vanadium is an optimal element for strengthening in both fcc and bcc high-entropy alloys10.1016/j.actamat.2020.01.062 ↗
7. Improvement of work-hardening capability and strength of FeNiCoCr-based high-entropy alloys by modulation of stacking fault energy and precipitation phase10.1016/j.ijplas.2025.104242 ↗
8. A powder-metallurgy-based fabrication route towards achieving high tensile strength with ultra-high ductility in high-entropy alloy10.1016/j.scriptamat.2020.08.038 ↗
9. Microstructure and tensile property of a precipitation strengthened high entropy alloy processed by selective laser melting and post heat treatment
10. Reversible dislocation movement, martensitic transformation and nano-twinning during elastic cyclic loading of a metastable high entropy alloy10.1016/j.actamat.2019.12.040 ↗
11. Aged metastable high-entropy alloys with heterogeneous lamella structure for superior strength-ductility synergy10.1016/j.actamat.2020.08.043 ↗
12. Atomic deformation mechanism and interface toughening in metastable high entropy alloy10.1016/j.mattod.2020.02.017 ↗
13. Adiabatic shear localization induced by dynamic recrystallization in an FCC high entropy alloy10.1016/j.ijplas.2023.103550 ↗
14. In-situ formed graphene providing lubricity for the FeCoCrNiAl based composite containing graphite nanoplate10.1016/j.compositesb.2021.109032 ↗
15. Metastability in high entropy alloys10.1016/j.scriptamat.2020.05.049 ↗
16. Strength-ductility synergy of an additively manufactured metastable high-entropy alloy achieved by transformation-induced plasticity strengthening10.1016/j.ijplas.2023.103823 ↗
17. The optimum grain size for strength-ductility combination in metals10.1016/j.ijplas.2023.103574 ↗
18. Excellent strength-ductility synergy in metastable high entropy alloy by laser powder bed additive manufacturing
19. Micromechanical origin for the wide range of strength-ductility trade-off in metastable high entropy alloys10.1016/j.scriptamat.2023.115439 ↗
20. Mitigating embrittlement of sigma phase in dual-phase high-entropy alloys through heterostructure design10.1016/j.ijplas.2025.104272 ↗
21. Enhancement of strength-ductility trade-off in a high-entropy alloy through a heterogeneous structure10.1016/j.actamat.2018.12.012 ↗
22. Exceptional strength-ductility synergy at room and liquid nitrogen temperatures of Al7.5Co20.5Fe24Ni24Cr24 high-entropy alloy with hierarchical precipitate heterogeneous structure10.1016/j.ijplas.2024.103939 ↗
23. Hetero-zone boundary affected region: a primary microstructural factor controlling extra work hardening in heterostructure10.1016/j.actamat.2022.118395 ↗
24. Realizing strength–ductility synergy in a lean duplex stainless steel through enhanced TRIP effect via pulsed electric current treatment10.1016/j.msea.2023.145534 ↗
25. Reconstructing the decomposed ferrite phase to achieve toughness regeneration in a duplex stainless steel10.1016/j.actamat.2019.11.008 ↗
26. Understanding the recrystallization and phase transformation of gradient nanostructured M50 steel under the athermal effect of electrical pulses10.1016/j.matchar.2023.113072 ↗
27. Accelerated precipitation of the B2 particles and its effect on Al0.3CoCrFeNi high-entropy alloy by electric current assisted annealing10.1016/j.matchar.2021.111434 ↗
28. Achieving superb mechanical properties in CoCrFeNi high-entropy alloy microfibers via electric current treatment10.1016/j.actamat.2024.120203 ↗
29. Study on the deformation mechanism of the Al0.1CrFeCoNi high entropy alloy at different deformation degrees under electric pulse treatment10.1016/j.msea.2022.144060 ↗
30. Improvement of mechanical properties and corrosion resistance of SLM-AlSi10Mg alloy by an eco-friendly electric pulse treatment10.1016/j.jclepro.2024.140864 ↗
31. Precipitation phase diffusion kinetics of AZ61 alloy under electrical pulse treatment10.1016/j.matchar.2022.112110 ↗
32. Tailoring the residual stress and mechanical properties by electroshocking treatment in cold rolled M50 steel10.1016/j.msea.2020.139171 ↗
33. Controlling CuCrZr alloy properties and microstructure rapidly by pulsed electric treatment (PET)
34. Effects of electric current on the plastic deformation behavior of pure copper, iron, and titanium10.1016/j.actamat.2021.116776 ↗
35. Defect reconfiguration in a Ti–Al alloy via electroplasticity10.1038/s41563-020-00817-z ↗
36. Revealing the pulse-induced electroplasticity by decoupling electron wind force10.1038/s41467-022-34333-2 ↗
37. Micromachined structures decoupling joule heating and electron wind force10.1038/s41467-024-50351-8 ↗
38. Strengthening of nanoprecipitations in an annealed Al0.5CoCrFeNi high entropy alloy10.1016/j.msea.2016.06.040 ↗
39. Aluminum alloying effects on lattice types, microstructures, and mechanical behavior of high-entropy alloys systems
40. Visualizing the electron scattering force in nanostructures10.1126/science.1186648 ↗
41. Effect of lattice distortion on thermal conduction behavior in a novel high-entropy rare-earth tantalates
42. Deciphering the enhanced oxygen reduction reaction activity of PrBa0.5Sr0.5Co1.5Fe0.5O5+δ via constructing negative thermal expansion offset for high-performance solid oxide fuel cell10.1016/j.apcatb.2024.124509 ↗
43. Improve the microstructure and properties of Al0.5CoCrFeNi compositionally complex alloy fabricated by selective laser melting with electropulsing treatment10.1016/j.msea.2023.146017 ↗
44. Improved tensile properties of Al0.5CoCrFeNi high-entropy alloy by tailoring microstructures10.1007/s12598-016-0860-y ↗
45. Mechanical behavior of Al0.5CoCrFeNi HEA during warm deformation
46. Microstructure and properties of bulk Al0.5CoCrFeNi high-entropy alloy by cold rolling and subsequent annealing10.1016/j.msea.2018.05.054 ↗
47. Microstructure and tensile properties of high-entropy alloy Al0.5CoCrFeNi particles reinforced Ti/Al laminated composite10.1080/09276440.2023.2240567 ↗
48. Microstructure tailoring of Al0.5CoCrFeMnNi to achieve high strength and high uniform strain using severe plastic deformation and an annealing treatment10.1016/j.jmst.2020.07.017 ↗
49. Nanophase precipitation and strengthening in a dual-phase Al0.5CoCrFeNi high-entropy alloy10.1016/j.jmst.2020.02.069 ↗
50. Probing the microstructure and deformation mechanism of an FeCoCrNiAl0.5 high entropy alloy during nanoscratching: a combined atomistic and physical model study10.1039/D4RA02422B ↗
51. Strain hardening and strengthening mechanism of laser melting deposition (LMD) additively manufactured FeCoCrNiAl0.5 high-entropy alloy10.1016/j.matchar.2022.112365 ↗
52. The effect of Al to high-temperature deformation mechanisms and processing maps of Al0.5CoCrFeMnNi high entropy alloy10.1016/j.jallcom.2019.06.099 ↗
53. Tuning microstructure via cold deformation and annealing for superb mechanical properties in Al0.5CoFeCrNiSi0.25 dual-phase high-entropy alloys10.1016/j.msea.2023.145326 ↗
54. Lightweight, ultrastrong and high thermal-stable eutectic high-entropy alloys for elevated-temperature applications10.1016/j.actamat.2023.118806 ↗
55. High-entropy alloys10.1038/s41578-019-0121-4 ↗
56. Athermally enhanced recrystallization kinetics of ultra-low carbon steel via electric current treatment10.1016/j.actamat.2022.117925 ↗
57. Simultaneously enhancing the strength and ductility of Cu-Ti-Fe alloy through electric current pulse induced precipitation10.1016/j.scriptamat.2024.116387 ↗
58. Diffusion in high entropy alloy systems – a review10.1016/j.pmatsci.2024.101245 ↗
59. Diffusion bonding of AlCoCrFeNi2.1 eutectic high entropy alloy to GH4169 superalloy10.1016/j.msea.2020.139843 ↗
60. Investigation on diffusion kinetics of Ti-X binary systems at 1300–1500 °C10.1016/j.jmrt.2023.06.054 ↗
61. Combined effect of B2 phase transformation and FCC/BCC lamellar structure on the mechanical property of heat treated dual-phase Al0.7CoCrFeNi high entropy alloy10.1016/j.jallcom.2025.179456 ↗
62. Spinodal decomposition and the pseudo-binary decomposition in high-entropy alloys10.1016/j.actamat.2023.118775 ↗
63. Molecular dynamics-based analysis of the effect of voids and HCP-phase inclusion on deformation of single-crystal CoCrFeMnNi high-entropy alloy10.1016/j.msea.2020.139444 ↗
64. Current development of body-centered cubic high-entropy alloys for nuclear applications10.1007/s42864-021-00086-6 ↗
65. Dislocation and twin substructure evolution during strain hardening of an fe–22 wt.% mn–0.6 wt.% C TWIP steel observed by electron channeling contrast imaging10.1016/j.actamat.2011.07.009 ↗
66. Enhanced strength-ductility synergy via novel bifunctional nano-precipitates in a high-entropy alloy10.1016/j.ijplas.2022.103235 ↗
67. Transition of plastic deformation mechanisms governed by spacing of nano-precipitates in a high entropy alloy10.1016/j.scriptamat.2022.114771 ↗
68. Nanoprecipitate and stacking fault-induced high strength and ductility in a multiscale heterostructured high-entropy alloy10.1016/j.ijplas.2023.103853 ↗
69. Strong and ductile FeNiCoAl-based high-entropy alloys for cryogenic to elevated temperature multifunctional applications10.1016/j.actamat.2022.118449 ↗
70. Criteria for predicting twin-induced plasticity in solid solution copper alloys10.1016/j.msea.2017.11.076 ↗
71. Hierarchically activated deformation mechanisms to form ultra-fine grain microstructure in carbon containing FeMnCoCr twinning induced plasticity high entropy alloy10.1016/j.msea.2021.141803 ↗
72. High manganese austenitic twinning induced plasticity steels: a review of the microstructure properties relationships10.1016/j.cossms.2011.04.002 ↗
73. Achieving ultra-high strength in a face-centered-cubic FeCrCoNi high entropy alloy through dense nanotwins bundles structure prepared by cryo-rolling10.1016/j.intermet.2022.107638 ↗
74. Achieving prominent high-temperature mechanical properties in a dual-phase high-entropy alloy: a synergy of deformation-induced twinning and martensite transformation10.1016/j.actamat.2023.119591 ↗
75. Wear-induced microstructural evolution in CoCrNi-based high-entropy alloys at cryogenic temperature10.1016/j.msea.2024.146185 ↗
76. Outstanding tensile properties of a precipitation-strengthened FeCoNiCrTi0.2 high-entropy alloy at room and cryogenic temperatures10.1016/j.actamat.2018.11.049 ↗
77. Heterogeneous precipitation behavior and stacking-fault-mediated deformation in a CoCrNi-based medium-entropy alloy10.1016/j.actamat.2017.07.029 ↗
78. Perspective on hetero-deformation induced (HDI) hardening and back stress10.1080/21663831.2019.1616331 ↗
79. Tailoring heterogeneities in high-entropy alloys to promote strength–ductility synergy10.1038/s41467-019-13311-1 ↗
80. Multiscale hierarchical heterostructure yields combined high strength and excellent ductility in a Co-Cr-Fe-Ni-Al negative enthalpy alloy10.1016/j.actamat.2024.120366 ↗
81. Microstructural origins of high strength and high ductility in an AlCoCrFeNi2.1 eutectic high-entropy alloy10.1016/j.actamat.2017.07.041 ↗
82. First-principles study on Ni 3 Al (111) antiphase boundary with Ti and Hf impurities10.1103/PhysRevB.95.214121 ↗
83. Ultrastrong steel via minimal lattice misfit and high-density nanoprecipitation10.1038/nature22032 ↗