journal article·2025-10Open access

Combined in situ X-ray diffraction and tomography study on the evolution of the microstructure in 316L stainless steel foams during compression

Jenő Gubicza, Kadosa Nagy, Zoltán Hegedűs, Indrajeet Tambe, Péter Nagy, Johan Hektor, Chaehee Han, Heeman Choe

Abstract

The evolution of the microstructure in 316L stainless steel foams with three different degrees of porosity during compression was studied in situ using the combination of synchrotron X-ray tomography and diffraction line profile analysis. The former and the latter techniques were applied for the investigation of the change of the porosity and the defect structure in the walls, respectively. The stress-strain curves of the foams up to a compressive strain of 0.6 can be divided into three stages irrespectively of the degree of porosity. In the first and third stages, hardening was observed while in the intermediate second stage, a stress drop occurred due to cracking. The evolution of the dislocation density in the walls was similar for all initial porosities: it increased from (2–3) × 10 14 m −2 to (14–17) × 10 14 m −2 . The relationship between relative stress and relative density can not be described with traditional models, since the walls consist of spherical particles in the present foams while the former models assumed that the walls comprise rods of equal cross-section. It was revealed that in the first stage of compression (up to the strain of 0.2–0.25) the wall hardening due to the increase of the dislocation density gave similar or higher contribution to increase of the flow stress than that caused by the reduction of porosity due to densification.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Cellular and Composite Structures · Additive Manufacturing Materials and Processes · High-Velocity Impact and Material Behavior

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (52)

Show source-provided references
1. Lucas · 1999
2. Application of minimum commitment method for predicting long-term creep life of type 316LN stainless steel
3. Effects of processing time and temperature on the surface properties of AISI 316L stainless steel during low temperature plasma nitriding after low temperature plasma carburizing
4. Effects of hydrogen diffusion on the mechanical properties of austenite 316L steel at ambient temperature10.2320/matertrans.M2010273 ↗
5. Exceptionally high strength and good ductility in an ultrafine-grained 316L steel processed by severe plastic deformation and subsequent annealing10.1016/j.matlet.2017.12.040 ↗
6. Fabrication methods of porous metals for use in orthopaedic applications10.1016/j.biomaterials.2005.12.002 ↗
7. Metal material, properties and design methods of porous biomedical scaffolds for additive manufacturing: a review,10.3389/fbioe.2021.641130 ↗
8. Gauthier · 2007 · 149
9. Young’s modulus of trabecular and cortical bone material: ultrasonic and microtensile measurements10.1016/0021-9290(93)90042-D ↗
10. A 20-year perspective on the mechanical properties of trabecular bone10.1115/1.2895536 ↗
11. Cytocompatibility and mechanical properties of novel porous 316 L stainless steel10.1016/j.msec.2013.02.038 ↗
12. The effect of sintering temperature and composition for density and porosity of SS316L foam
13. Development and characterization of SS316L foam prepared by powder metallurgy route10.4028/www.scientific.net/AMM.534.31 ↗
14. The impact of composition and sintering temperature for stainless steel foams (SS316L) fabricated by space holder method with urea as space holder10.4028/www.scientific.net/MSF.888.413 ↗
15. The effect of different urea composition on production of porous stainless steel type 316L through powder metallurgy technique
16. Microstructure and compressive deformation behavior of SS foam made through evaporation of urea as space holder10.1016/j.matchemphys.2018.11.040 ↗
17. Synthesis and characterization of 316L stainless steel foam made through two different removal process of space holder method10.1016/j.mfglet.2020.09.005 ↗
18. Compressive properties and energy absorption behavior of 316L steel foam prepared by space holder technique10.3390/ma16041419 ↗
19. Porous stainless steel for biomedical applications10.1590/S1516-14392011005000021 ↗
20. Stainless steel foams made through powder metallurgy route using NH4HCO3 as space holder10.1016/j.matdes.2015.09.020 ↗
21. Production of stainless steel 316L foam with different solid loading10.4028/www.scientific.net/MSF.840.321 ↗
22. Production OF 316L stainless steel (SS316L) foam via slurry method10.15282/jmes.5.2013.17.0068 ↗
23. Fabrication of stainless steel foams using polymeric sponge impregnation technology10.4028/www.scientific.net/AMR.1035.219 ↗
24. Binder jetting additive manufacturing of high porosity 316L stainless steel metal foams10.3390/ma13173744 ↗
25. Fabrication of novel 316L stainless steel scaffolds by combining freeze-casting and 3D-printed gyroid templating techniques10.1016/j.msea.2024.147200 ↗
26. Deformation behavior of open-cell stainless steel foams10.1016/j.msea.2014.07.098 ↗
27. Investigation of the mechanical behaviour of AISI 316L stainless steel syntactic foams at different strain-rates10.1016/j.compositesb.2014.06.001 ↗
28. A novel process for manufacturing porous 316 L stainless steel with uniform pore distribution10.1016/j.matdes.2017.02.069 ↗
29. In situ shear behavior of open-cell austenitic 316L steel foams10.1016/j.matchemphys.2020.123303 ↗
30. Effect of particle shape on microstructure and compressive response of 316L SS foam by space holder technique10.1016/j.matchemphys.2021.124924 ↗
31. A novel approach to fabricating SUS 316L steel foam using material extrusion additive manufacturing technology10.1016/j.jmrt.2025.05.044 ↗
32. Additive manufacturing process related mechanical performance of cobalt-chromium-molybdenum alloy: in-situ X-ray computed tomography study10.1016/j.msea.2025.148393 ↗
33. Imaging modalities at the Swedish materials science beamline at PETRA III, 201910.1088/1757-899X/580/1/012032 ↗
34. Dowd · Develop. X-Ray Tomography II · 1999 · 3772 · 13
35. Tomopy: a framework for the analysis of synchrotron tomographic data10.1107/S1600577514013939 ↗
36. Ilastik: interactive machine learning for (bio)image analysis10.1038/s41592-019-0582-9 ↗
37. New tools for calibrating diffraction setups10.1107/S1600577520000776 ↗
38. Correlation between strength and microstructure of ball-milled Al–Mg alloys determined by X-ray diffraction10.1016/j.msea.2004.01.089 ↗
39. Gubicza · 2014
40. Stacking fault energies of seven commercial austenitic stainless steels10.1007/BF02641927 ↗
41. Deformation behavior of cell walls in an additively manufactured hybrid metallic foam
42. Compressive strength modeling and validation of cenosphere-reinforced aluminum–magnesium-matrix-based syntactic foams10.1016/j.msea.2022.143452 ↗
43. Fabrication of a thin open-cell Ni foam sheet with a high specific strength and moderate porosity using severe plastic deformation via differential speed rolling10.1016/j.msea.2019.02.035 ↗
44. Different evolutions of the microstructure, texture, and mechanical performance during tension and compression of 316L stainless steel10.1007/s11661-020-05782-5 ↗
45. Reliability and interpretation of the microstructural parameters determined by X-ray line profile analysis for nanostructured materials10.1140/epjs/s11734-022-00572-z ↗
46. Investigating the effect of grain structure on compressive response of open-cell metal foam using high-fidelity crystal-plasticity modeling10.1016/j.msea.2021.140847 ↗
47. A high-entropy alloy syntactic foam with exceptional cryogenic and dynamic properties10.1016/j.msea.2023.145146 ↗
48. Mechanical behavior and microstructure of compressed Ti foams synthesized via freeze casting10.1016/j.jmbbm.2016.07.012 ↗
49. Microstructural and mechanical behaviour of friction welded SS316L components fabricated by selective laser melting
50. The properties of foams and lattices10.1098/rsta.2005.1678 ↗
51. The out-of-plane properties of honeycombs10.1016/0020-7403(92)90013-7 ↗
52. Mechanical behavior of freeze-cast Ti foams with varied porosity10.1016/j.msea.2022.143911 ↗