Functional gradation in precipitation hardenable aluminum alloy AA7075 by differential cooling strategies: Macroscopic and microscopic effects I
Source abstract
Abstract
The present study investigates the effect of coupled thermo-mechanical phenomena, referred to thermal evolution and plastic deformation, during hot stamping of precipitation hardenable aluminum alloy AA7075 by using an in-situ approach of differential cooling in combination with electron microscopy. To explore the intrinsic geometry-dependent local strain distribution of the tailored microstructure, digital image correlation coupled with tensile tests is used. The precipitates size distribution, morphology and types are investigated using electron channeling contrast imaging and differential scanning calorimetry. Results indicate that the forming tool temperature and contact time within closed forming tools are influential parameters for tailoring the microstructure distribution. A sigmoidal curve-like hardness distribution is found for the forming tool temperature difference of 24 °C–300 °C and 24 °C–350 °C, showing a steep decrease from 180 HV5 to 123 HV5. This is explained by the detected coarse and lath-shaped quench-induced precipitates in the soft zone and formation of fine strengthening η′-phase type in the hard zone in areas with higher supersaturation. Transition zones contain a mixture of precipitates structures of varying morphology and types, with a lower aspect ratio on the heated section. This fact leads to an inhomogeneous plastic deformation mainly located in the heated zones and consequently a high strain hardening rate due to the increased inter-particle-spacing and higher dislocation mean free path. Post-cooling after differential cooling generates higher mechanical properties for water-quench compared to air-cooling, as it prevents the nucleation of quench-induced precipitates and segregation of solute atoms to grain boundaries.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Aluminum Alloy Microstructure Properties · Aluminum Alloys Composites Properties · Microstructure and mechanical properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (67)
Show source-provided references
1. Koizumi · 1993 · 3
2. Concept and P/M fabrication of functionally gradient materials10.1016/0272-8842(95)00143-3 ↗
3. An overview on functional gradation
4. Press hardening - from ultra-high-strength steel to body-in-white application
5. Ailored X - Maßgeschneiderte produkte brauchen maßgeschneiderte fertigungsprozesse
6. Components with optimised properties due to advanced thermo-mechanical process strategies in hot sheet metal forming10.1002/srin.200806322 ↗
7. Plasticity and fracture modeling of quench-hardenable boron steel with tailored properties10.1016/j.jmatprotec.2013.12.015 ↗
8. Hot stamping of multi-material composites
9. Flexibly rolled sheet metal and its use in sheet metal forming
10. A study on resistance welding in steel sheets using a tailor-welded blank (1st report)10.1016/S0924-0136(00)00476-3 ↗
11. Moreira · 2012
12. Lin Dean · 2008
13. An investigation of the effects of solution heat treatment on mechanical properties for AA 6 xxx alloys: experimentation and modelling10.1016/j.ijplas.2004.11.002 ↗
14. Investigation into the hot forming-quenching integrated process with cold dies for high strength aluminum alloy
15. Warm-forming of pre-aged Al-Zn-Mg-Cu alloy sheet10.1016/j.matdes.2020.108837 ↗
16. Precipitation reactions in age-hardenable alloys during laser additive manufacturing10.1007/s11837-015-1764-2 ↗
17. Strengthening behavior of Al–Cu–Mg alloy sheet in hot forming–quenching integrated process with cold–hot dies10.1016/j.matdes.2015.06.058 ↗
18. Grain structure effect on quench sensitivity of Al—Zn—Mg—Cu—Cr alloy10.1016/S1003-6326(16)64319-4 ↗
19. Effect of pre-deformation on quench-induced inhomogeneity of microstructure and hardness in 7050 aluminum alloy10.1016/j.matchar.2019.110005 ↗
20. Effect of microstructure on the quench sensitivity of AlZnMgCu alloys10.1016/j.jallcom.2010.07.124 ↗
21. GP-zones in Al–Zn–Mg alloys and their role in artificial aging10.1016/S1359-6454(01)00251-8 ↗
22. Characterization of precipitates in an aged 7 xxx series Al alloy10.1002/sia.1702 ↗
23. An electron microscope investigation of the microstructure in an aluminium-zinc-magnesium alloy10.1016/0001-6160(70)90016-7 ↗
24. HREM study and structure modeling of the η′ phase, the hardening precipitates in commercial Al–Zn–Mg alloys10.1016/S1359-6454(99)00138-X ↗
25. Effects of chromium and copper additions on precipitation in Al−Zn−Mg alloys10.1007/BF02913356 ↗
26. Early-stage precipitation in al–zn–mg–cu alloy (7050)10.1016/j.actamat.2004.06.025 ↗
27. Decomposition processes in al-zn-mg alloys10.1007/BF00541825 ↗
28. Investigation of precipitation in an Al–Zn–Mg alloy after two-step ageing treatment at 100° and 150°C10.1016/S0921-5093(99)00231-2 ↗
29. Characterization and modeling of precipitation kinetics in an Al–Zn–Mg alloy10.1016/S0921-5093(00)01247-8 ↗
30. The chemistry of precipitates in an aged Al-2.1Zn-1.7Mg at.% alloy10.1016/S1359-6462(99)00253-5 ↗
31. Secondary ageing in an aluminium alloy 705010.1016/j.msea.2008.02.039 ↗
32. Predicting the quench sensitivity of Al–Zn–Mg–Cu alloys: a model for linear cooling and strengthening10.1016/j.matdes.2015.09.058 ↗
33. Effect of quench-induced precipitation on microstructure and mechanical properties of 7085 aluminum alloy10.1016/j.matdes.2017.06.054 ↗
34. Influence of aging on quench sensitivity effect of 7055 aluminum alloy10.1016/j.matchar.2006.10.019 ↗
35. Effect of Zener-Hollomon parameter on quench sensitivity of 7085 aluminum alloy10.1016/j.jallcom.2016.07.089 ↗
36. Current challenges and opportunities in microstructure-related properties of advanced high-strength steels10.1007/s11661-020-05947-2 ↗
37. Functional gradation in precipitation hardenable AA7075 alloy by differential cooling strategies10.4028/www.scientific.net/KEM.883.159 ↗
38. Thermo-mechanical gradation of precipitation-hardenable aluminum alloy AA7075 by differential cooling10.1016/j.matlet.2022.133465 ↗
39. Influence of hot deformation on the precipitation hardening of high-strength aluminum AA7075 during thermo-mechanical processing10.3390/met11050681 ↗
40. Adiabatic temperature increase associated with deformation twinning and dislocation plasticity10.1016/j.actamat.2012.03.008 ↗
41. Physics and phenomenology of strain hardening: the FCC case10.1016/S0079-6425(02)00003-8 ↗
42. The influence of precipitation on the work-hardening behavior of the aluminum alloys AA6111 and AA703010.1007/s11661-003-0007-2 ↗
43. Hundred years of precipitation hardening10.1016/S1471-5317(01)00006-2 ↗
44. Precipitation during cooling of 7XXX aluminum alloys10.1016/j.commatsci.2017.08.008 ↗
45. A calorimetric study of aluminium alloy AA-707510.1007/BF00540811 ↗
46. Effects of aging under stress on mechanical properties and microstructure of EN AW 7075 alloy10.3390/met11071142 ↗
47. Improvement of weld temperature distribution and mechanical properties of 7050 aluminum alloy butt joints by submerged friction stir welding10.1016/j.matdes.2011.06.021 ↗
48. Ostermann · 2014
49. Atom probe studies on the early stages of precipitation in Al–Mg–Si alloys10.1016/S0921-5093(98)00548-6 ↗
50. Segregation assisted grain boundary precipitation in a model Al-Zn-Mg-Cu alloy10.1016/j.actamat.2018.07.003 ↗
51. Measurements of equilibrium vacancy concentrations in aluminum10.1103/PhysRev.117.52 ↗
52. Precipitation hardening
53. Mechanisms controlling the artificial aging of Al–Mg–Si alloys10.1016/j.actamat.2011.02.010 ↗
54. The kinetics of grain-boundary nucleated phase transformations: simulations and modelling10.1016/j.actamat.2011.05.054 ↗
55. Overview no. 102 theory assisted design of high strength low alloy aluminum10.1016/0956-7151(93)90334-O ↗
56. Continuous cooling precipitation diagram of aluminium alloy AA7150 based on a new fast scanning calorimetry and interrupted quenching method10.1016/j.matchar.2016.08.016 ↗
57. Effect of recrystallisation on Al3Zr dispersoid behaviour in thick plates of aluminium alloy AA715010.1007/s10853-013-7856-x ↗
58. Effect of thermo-mechanical processing on quench-induced precipitates morphology and mechanical properties in high strength AA7075 aluminum alloy10.1016/j.matchar.2021.111026 ↗
59. Microstructure-based modelling of isotropic and kinematic strain hardening in a precipitation-hardened aluminium alloy10.1016/j.actamat.2011.02.035 ↗
60. Sequential modeling of local precipitation, strength and strain hardening in friction stir welds of an aluminum alloy 6005A-T610.1016/j.actamat.2007.07.012 ↗
61. Gitterbaufehler, phasengrenzen, gefüge
62. Lendvai · 1996 · 43
63. Precipitates in aluminium alloys
64. Hull · 2011
65. The type of dislocation interaction as the factor determining work hardening10.1016/0025-5416(80)90175-5 ↗
66. Work hardening in heterogeneous alloys—a microstructural approach based on three internal state variables10.1016/S1359-6454(00)00289-5 ↗
67. Evaluation of strain caused by coherent precipitates in an Al alloy using TEM techniques10.1016/j.matchar.2012.07.017 ↗