journal article·2025-06Open access

Yield of cyclic vs heat-and-hold induction sintering on the mechanical behaviour of the low-cost Ti-5Fe alloy

L. Bolzoni, V. Roduit, E. Carreno-Morelli, F. Yang, S. Raynova

Abstract

The high cost of Ti alloys is hindering their industrial implementation and, therefore, the quest for low-cost Ti alloys entails lowering the intrinsic cost using cheaper alloying elements and developing more efficient manufacturing methods. In this study, the yield of manufacturing the novel low-cost Ti-5Fe alloy via heat-and-hold and cyclic induction sintering around the allotropic α→β phase transformation was compared as the latter is expected to enhance densification . It is demonstrated that induction sintering is extremely efficient due to its characteristic high heating rates and simultaneously permits to obtain homogenous chemical compositions at low homologous sintering temperatures . Cyclic sintering yields faster sintering kinetics, which results in higher densification with respect to heat-and-hold, achieving uniform residual porosity distributions within the microstructure, comparable relative density, and on average smaller and more spherical pores. Consequently, higher strength but not necessarily higher ductility is obtained for the cyclic sintered Ti-5Fe alloy as the failure mode entails crack propagation through irregularly shaped pores.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Titanium Alloys Microstructure and Properties · Advanced materials and composites · Intermetallics and Advanced Alloy Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (41)

Show source-provided references
1. Microstructure and properties of a novel ternary Ti-6Zr-xFe alloy for biomedical applications10.1016/j.jallcom.2020.157119 ↗
2. Effect of starting powder grade on sintering and properties of PM Titanium metal matrix composites10.1179/174329009X457117 ↗
3. Production of Titanium alloys for advanced aerospace systems by powder metallurgy10.1590/S1516-14392005000400015 ↗
4. Ti based biomaterials, the ultimate choice for orthopaedic implants - a review10.1016/j.pmatsci.2008.06.004 ↗
5. Refinement of the grain size of the LM25 alloy (A356) by 96Al-2Nb-2B master alloy10.1016/j.jmatprotec.2015.03.011 ↗
6. Grain refining potency of Nb-B -noculation on Al-12Si-0.6Fe-0.5Mn alloy10.1016/j.jallcom.2014.10.069 ↗
7. Improving strain hardening capacity of high-strength Ti-6Al-4V alloy by a dual harmonic structure10.1016/j.jmrt.2023.07.267 ↗
8. Titanium alloy production technology, Market prospects and industry development10.1016/j.matdes.2010.09.011 ↗
9. Phase transformation pathways in a Ti-5.9Cu alloy modified with Fe and Al10.1016/j.jmrt.2023.11.014 ↗
10. Consolidation of Titanium matrix composites to maximum density by different hot pressing techniques10.1016/j.msea.2010.03.093 ↗
11. Beta Titanium alloys and their role in the Titanium industry
12. Powder metallurgy strategies to improve properties and processing of Titanium alloys: a review10.1002/adem.201600743 ↗
13. Evaluation of cast Ti-Fe-O-N alloys for dental applications10.1016/j.msec.2005.04.002 ↗
14. Mechanical behaviour of induction sintered blended elemental powder metallurgy Ti alloys10.1016/j.msea.2020.140157 ↗
15. The effect of thermomechanical treatments on the properties of powder metallurgy Ti-5Fe alloy10.1016/j.msea.2020.140389 ↗
16. Hybrid microwave sintering of blended elemental Ti alloys10.1016/j.jmapro.2019.02.002 ↗
17. Effect of particle size and manufacturing technique on the properties of the PM Ti-5Fe alloy10.1016/j.ijrmhm.2020.105246 ↗
18. Thermomechanically processed powder metallurgy Ti-5Fe alloy: effect of microstructure, Texture, Fe Partitioning and residual porosity on tensile and fatigue behaviour10.1016/j.mtla.2021.101254 ↗
19. Work hardening of microwave sintered blended elemental Ti alloys10.1016/j.jallcom.2020.155559 ↗
20. In-situ alloying of Ti-5Fe Titanium alloy using direct powder forging and the effect of the powder mixing method10.1016/j.mtla.2022.101471 ↗
21. Ti-5Fe spherical powder alloy prepared by Electrode induction gas atomization processes (EIGA) for additive manufacturing of biomedical implants10.1016/j.matlet.2023.135238 ↗
22. Cost-affordable, biomedical Ti-5Fe alloy developed using elemental powders and laser in-situ alloying additive manufacturing10.1016/j.matchar.2021.111526 ↗
23. Advancement in the pressureless sintering of CP Titanium using high-frequency induction heating10.1007/s11661-019-05381-z ↗
24. Effect of repeated allotropic transformation on sintering of Iron powder10.1007/BF02656611 ↗
25. Increase of sintering rate of Titanium powder during cyclic phase transformation10.1179/pom.1981.24.1.41 ↗
26. Titanium sintering science: a review of atomic events during densification10.1016/j.ijrmhm.2020.105214 ↗
27. Evaluation of reactive induction sintering as a manufacturing route for blended elemental Ti-5Al-2.5Fe alloy10.1016/j.jmatprotec.2018.01.013 ↗
28. Effects of Ni addition and cyclic sintering on microstructure and mechanical properties of coarse grained WC-10Co cemented carbides10.1016/j.ijrmhm.2016.02.008 ↗
29. Enhanced densification of Ti-6Al-4V powders by transformation-mismatch plasticity10.1016/j.actamat.2010.03.047 ↗
30. Cyclic phase transition-assisted spark plasma sintering of AlCoCrFeNi complex concentrated alloys10.1007/s11661-024-07308-9 ↗
31. Effect of combined lean additions of isomorphous and eutectoid Beta stabilisers on the properties of Titanium10.1016/j.jmrt.2022.11.023 ↗
32. Murray · 1987
33. Mechanical behaviour of pressed and sintered Titanium alloys obtained from prealloyed and blended elemental powders10.1016/j.jmbbm.2012.05.013 ↗
34. Boyer · 1998
35. Morinaga · 1988 · vol. III · 1601
36. Diffusion of iron in β Ti-Fe alloys10.1016/1359-6462(95)00617-6 ↗
37. Ternary Ti alloys functionalised with antibacterial activity10.1038/s41598-020-79192-3 ↗
38. Sintering Trajectories: Description on how density, surface area, and grain size change
39. Distinguishing the influence of Aluminium and Vanadium additions on microstructural evolution and densification behaviour during the sintering of Ti6Al, Ti4V and Ti6Al4V10.1080/00325899.2018.1501946 ↗
40. Low-cost Titanium alloys? Iron may hold the Answers10.1016/S0026-0657(09)70040-2 ↗
41. Influence of Fe content and particle size on the processing and mechanical properties of low-cost Ti-xFe alloys10.1016/j.msea.2010.05.026 ↗