journal article·2025-06Open access

Prediction of multiaxial deformation of 316H stainless steel at high temperature using a multiscale crystal plasticity approach

Christopher Allen, Harry Coules, Christopher E. Truman, Mehdi Mokhtarishirazabad, Simon McKendrey, Amelia Billings, Chen Liu, Catrin M. Davies, Joe Kelleher

Abstract

Steel components in advanced gas-cooled reactors (AGRs) are subject to multiaxial deformation at high temperatures. Neutron diffraction has been used to study the {111}, {200}, {220} and {311} grain family, also known as lattice plane, response during in-situ loading and relaxation of notched bars of 316H stainless steel at 550 °C. These experimental conditions have been modelled using a multiscale approach that employs finite element models at the continuum, component, scale as boundary conditions for a crystal plasticity finite element model. For the bar with the highest triaxiality factor at the diffracting region, the CPFE model was in good agreement with the experiment results. The most notable difference was the reduced accumulation of intergranular strain in the {200} grain family and significant stiffness difference in the {220} grain family in the transverse direction. For the bar with the lowest triaxiality factor at the diffraction region, the agreement between the CPFE model and experiment was acceptable but poorer than the bar with the higher triaxiality factor. This is due to the CPFE sensitivity to the macroscopic boundary conditions applied. Reasonable agreement was achieved for the relaxation dwells. The modelling has shown that multiaxial conditions, enforced by the multiscale approach, cause an increase in stiffness in the CPFE response, resulting in the reduction in the intergranular strain accumulated. • A multiscale modelling approach was used to apply multiaxial loading to a CPFE model. • CPFE model effectively predicts the multiaxial deformation measured experimentally using neutron diffraction.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Microstructure and Mechanical Properties of Steels · Microstructure and mechanical properties · Metallurgy and Material Forming

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (48)

Show source-provided references
1. Self-consistent modelling of cyclic loading and relaxation in austenitic 316H stainless steel10.1080/14786435.2018.1556407 ↗
2. AFCEN · 2022
3. Investigation into the effects of prior plasticity on creep accumulation in 316H stainless steel
4. Effects of prior plasticity on subsequent creep of type 316 stainless steel at elevated temperature10.1115/1.3225844 ↗
5. O. Ajaja, A. Ardell, The Effect of Prior Cold Work on the Creep Characteristics of AISI Type 304 Austenitic Stainless Steel, Tech. Rep., 1978.
6. Influence of prior cyclic hardening on high temperature deformation and crack growth in type 316L (N) stainless steel10.1080/09603409.1998.11689599 ↗
7. The influence of pre-compression on the creep deformation and failure behaviour of Type 316H stainless steel10.1016/j.engfracmech.2013.08.006 ↗
8. Critical analysis of the prediction of stress relaxation from forward creep of Type 316H austenitic stainless steel10.1016/j.matdes.2016.01.118 ↗
9. Full-tensor measurement of multiaxial creep stress relaxation in Type 316H stainless steel10.1007/s11340-021-00755-0 ↗
10. Overview of constitutive laws, kinematics, homogenization and multiscale methods in crystal plasticity finite-element modeling: Theory, experiments, applications10.1016/j.actamat.2009.10.058 ↗
11. Comparison of self-consistent and crystal plasticity FE approaches for modelling the high-temperature deformation of 316H austenitic stainless steel10.1016/j.ijsolstr.2019.05.006 ↗
12. The effects of internal stresses on the creep deformation investigated using in-situ synchrotron diffraction and crystal plasticity modelling10.1016/j.ijsolstr.2021.111127 ↗
13. Crystal plasticity modeling of cyclic deformation for a polycrystalline nickel-based superalloy at high temperature10.1016/j.msea.2010.02.045 ↗
14. Microstructure-based multiscale modeling of large strain plastic deformation by coupling a full-field crystal plasticity-spectral solver with an implicit finite element solver10.1016/j.ijplas.2019.09.004 ↗
15. Two-scale FE–FFT- and phase-field-based computational modeling of bulk microstructural evolution and macroscopic material behavior10.1016/j.cma.2016.03.001 ↗
16. An analysis of macro- and micro-scale residual stresses of Type I, II and III using FIB-DIC micro-ring-core milling and crystal plasticity FE modelling10.1016/j.ijplas.2017.07.004 ↗
17. A multi-scale approach to microstructure-sensitive thermal fatigue in solder joints10.1016/j.ijplas.2022.103308 ↗
18. Creep-fatigue damage mechanisms and life prediction based on crystal plasticity combined with grain boundary cavity model in a nickel-based superalloy at 650 °C10.1016/j.ijplas.2023.103601 ↗
19. Effect of boundary conditions on the evolution of lattice strains in a polycrystalline austenitic stainless steel10.1007/s10853-017-0997-6 ↗
20. Elastoplastic deformation of 316 stainless steel under tensile loading at elevated temperatures10.1007/s11661-006-0129-4 ↗
21. A synchrotron X-ray diffraction study of non-proportional strain-path effects10.1016/j.actamat.2016.11.011 ↗
22. A synchrotron X-ray diffraction study of in situ biaxial deformation10.1016/j.actamat.2015.02.009 ↗
23. Microstructure-informed, predictive crystal plasticity finite element model of fatigue-dwells
24. ENGIN-X: a third-generation neutron strain scanner10.1107/S0021889806042245 ↗
25. Statistical analysis of residual stress determinations using neutron diffraction10.1016/j.ijpvp.2008.11.003 ↗
26. Dassault Systèmes · 2018
27. Demir · 2023
28. Grain size and shape dependent crystal plasticity finite element model and its application to electron beam welded SS316L10.1016/j.jmps.2023.105331 ↗
29. The inclusion and role of micro mechanical residual stress on deformation of stainless steel type 316L at grain level10.1016/j.msea.2023.145096 ↗
30. A mathematical representation of the multiaxial bauschinger effect10.3184/096034007X207589 ↗
31. Latent hardening in iron single crystals10.1016/0001-6160(66)90217-3 ↗
32. DREAM.3D: A digital representation environment for the analysis of microstructure in 3D10.1186/2193-9772-3-5 ↗
33. Continuum and crystal plasticity coupled finite element modelling to explore complex loading conditions
34. Study of lattice strain evolution during biaxial deformation of stainless steel using a finite element and fast Fourier transform based multi-scale approach10.1016/j.actamat.2016.07.028 ↗
35. Investigating mechanical degradation due to fire exposure of aluminum alloy 5083 using crystal plasticity finite element method10.1016/j.ijsolstr.2017.10.021 ↗
36. Determination of plasticity following deformation and welding of austenitic stainless steel10.1016/j.msea.2017.06.074 ↗
37. The precision of diffraction peak location10.1107/S002188980101411X ↗
38. Effect of plasticity on creep deformation in Type 316H stainless steel
39. Measured and predicted intergranular strains in textured austenitic steel10.1016/S1359-6454(99)00354-7 ↗
40. Self-consistent modelling of the plastic deformation of f.c.c. polycrystals and its implications for diffraction measurements of internal stresses10.1016/S1359-6454(98)00014-7 ↗
41. Interphase and intergranular stress generation in carbon steels10.1016/j.actamat.2003.12.035 ↗
42. The lattice strain ratio in characterizing the grain-to-grain interaction effect and its specific insight on the plastic deformation of polycrystalline materials
43. Effects of temperature and hold time on dynamic strain aging in a nickel based superalloy10.1179/1878641314Y.0000000018 ↗
44. Dynamic strain aging effects on low-cycle fatigue of AISI 430F10.1016/j.msea.2009.01.047 ↗
45. Microstructural and mechanical influences on dynamic strain aging phenomena10.1179/imr.1994.39.3.113 ↗
46. Anelasticity in austenitic stainless steel10.1016/j.actamat.2012.08.060 ↗
47. Compilation of stress-relaxation data for engineering alloys
48. Elasticity and anelasticity of metals10.1021/j150474a017 ↗